0648846063546

RIDGID

Model # R4030S

Internet # 203757434

Store SKU # 311220

7 in. Tile Saw with Stand

$297.00 /each

FREQUENTLY BOUGHT TOGETHER

PRODUCT OVERVIEW

Model # R4030S

Internet # 203757434

Store SKU # 311220

RIDGID introduces its new 7 in. Job Site Wet Tile Saw with included stand. This is the most affordable pro saw on the market. This saw's powerful 9 Amp, 1-3/4 HP motor, best-in-class cutting capacities, die cast aluminum table and heavy duty arm all come standard on this saw. Every feature on this saw is innovative and the definition of quality for a pro tile saw. The Deep Well Wave Wall will extend the life of your pump and the removable water nozzles maximize water efficiency to the blade while cutting. This equals better cutting for a longer time than competitor saws. All of these amazing features are backed by RIDGID's industry leading lifetime service agreement. That means free parts, free service, for life.

California residents: see  Proposition 65 information

  • Powerful motor heavy duty motor powers through natural and manmade tile and pavers
  • Best in class cut capacity 24 in. rip, 18 in. diagonal and 2-1/4 in. deep
  • Die cast aluminum table runs on dual precision extruded aluminum rails, guided by sealed ball bearing rollers, provides solid material support and measurement marks for added accuracy
  • Included stand for ease of use on any jobsite
  • Exact-line adjustable laser alignment system assists operator in accurately align cutting wheel with the cut line
  • Guard baffle reduces air turbulence to help keep water on the blade while removing excess water to limit misting and overspray
  • Beveling head accurately position the head to make 0° and 45° bevel cuts
  • Plunging head allows controlled cuts for electrical outlets and HVAC registers
  • Submersible pump - high volume pump provides water to the cutting wheel
  • Deep well wave wall creates barrier around pump well that extends pump life by blocking sediment from entering pump when in use

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Blade Thickness 
0.063 in 
Blade size (in.) 
Product Width (in.) 
22.99 
Details
Amperage (amps) 
Blade Material 
Steel 
Cuts Through 
Ceramic,Porcelain,Stone 
Deck material 
Aluminum 
Flooring Product Type 
Tile Tool 
Maximum tile cut size diagonal (in.) 
18 
Maximum tile cut size rip (in.) 
24 
Product Weight (lb.) 
44.02 lb 
Returnable 
90-Day 
Saw Blade Material 
Diamond 
Tile Saw Features 
Bevel,Laser Guide,Plunge,Stand,Water Pump,Water Tray 
Tile Tool Type 
Overhead Tile Saws 
Voltage (volts) 
120 
Warranty / Certifications
Manufacturer Warranty 
Lifetime Service Agreement 

MORE PRODUCTS WITH THESE FEATURES

Tile Tool Type: Overhead Tile Saws
Brand: RIDGID
Price: $250 - $300
Maximum tile cut size diagonal (in.): 18
Blade size (in.): 7
Review Rating: 4 & Up
Search
40 Questions152 Answers

Customer Questions & Answers

7 in. Tile Saw with Stand
7 in. Tile Saw with Stand

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 7 in. Tile Saw with Stand
 
11 answers

Can this model make bevel cuts?

This question is from 7 in. Tile Saw with Stand
Asked by
Rainman
Medford,OR
September 23, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (11)

Asked by
Read all my Q&A
June 15, 2014
Answer: 
The saw does bevel cut. you must raise the saw head by adjusting the plunge cut depth and check blade clearance when table passes under the blade. The blade must be below the table surface , but not contacting the table. Re adjust as necessary.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Seattle, Bitter lake Home Depot
Read all my Q&A
May 31, 2014
Answer: 
Yes
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Granbury, TX
Read all my Q&A
March 18, 2014
Answer: 
yes. It can make bevel cuts up to 45 deg.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Maryland, USA
Read all my Q&A
December 24, 2013
Answer: 
YES,ONLY 45 DEGREE
-2points
1out of 4found this answer helpful.
Was this helpful?helpful1unhelpful3

Asked by
NW Arkansas
Read all my Q&A
December 6, 2013
Answer: 
yes it can
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Wichita, KS
Read all my Q&A
November 29, 2013
Answer: 
You can make 45 degree bevel cuts,
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Denver co
Read all my Q&A
Home Improvement Profile: DIYer
October 20, 2013
Answer: 
I haven't used it, but it does do bevel cuts.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Opelousas, Louisiana
Read all my Q&A
October 16, 2013
Answer: 
yes
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
October 9, 2013
Answer: 
Yes saw head miters 1 to 45 degrees.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Colorado Springs, CO
Read all my Q&A
September 23, 2013
Answer: 
Yes. Up to 45 degrees. For angles other than 45 you will need a protractor and you will have to set the depth.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Read all my Q&A
September 23, 2013
Answer: 
Yes, the RIDGID R4030S 7” tile saw can make 0 to 45 degree bevel cuts.
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0
This question is from 7 in. Tile Saw with Stand
 
10 answers

Can you plunge cut with this? Or does the blade just slide back and forth?

This question is from 7 in. Tile Saw with Stand
Asked by
Wannatileitnice!
September 25, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (10)

Asked by
coventry , ct.
Read all my Q&A
June 12, 2014
Answer: 
the saw head pivots or can be locked in place for normal cutting. the table slides for normal cutting. plunge cut for register cuts ect
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1

Asked by
Seattle, Bitter lake Home Depot
Read all my Q&A
May 31, 2014
Answer: 
yes,plunge cuts are possible with this saw
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Granbury, TX
Read all my Q&A
March 18, 2014
Answer: 
can't plunge cut. blade is stationary. The table moves back and forth.
-12points
0out of 12found this answer helpful.
Was this helpful?helpful0unhelpful12

Asked by
Maryland, USA
Read all my Q&A
December 24, 2013
Answer: 
YES YOU CAN,YOU CAN UPWARD THE MOTOR HEAD
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
NW Arkansas
Read all my Q&A
December 6, 2013
Answer: 
Yes you can plung cut, the blade does not slide back and forth, the table does, but it can be locked in place for plung cuts
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Denver co
Read all my Q&A
Home Improvement Profile: DIYer
October 20, 2013
Answer: 
Yes, it does plunge cuts. There is a large (easy to turn) thumb screw that unlocks the head so it can pivot up allowing you to slide the tile under the blade and then lower the blade into the tile. It is not counter balanced or anything fancy like that, so you have to support the weight of the head as you move the tile into position.
Also, you can't set the maximum depth of cut as far as I can tell. Read More
Yes, it does plunge cuts. There is a large (easy to turn) thumb screw that unlocks the head so it can pivot up allowing you to slide the tile under the blade and then lower the blade into the tile. It is not counter balanced or anything fancy like that, so you have to support the weight of the head as you move the tile into position.
Also, you can't set the maximum depth of cut as far as I can tell. This would be really helpful when doing plunge cuts where you want a certain finished width. Instead you have to freehand it, which means you end up trying a dozen times to get that perfect cut. I don't know, but I suspect pro level saws do let you set the maximum depth making plunge cuts much less of a chore. Read Less
+7points
7out of 7found this answer helpful.
Was this helpful?helpful7unhelpful0

Asked by
Opelousas, Louisiana
Read all my Q&A
October 16, 2013
Answer: 
Yes you can plung cut with this saw
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
October 9, 2013
Answer: 
No plunge cut on this saw.
-16points
0out of 16found this answer helpful.
Was this helpful?helpful0unhelpful16

Asked by
Milwaukee, WI
Read all my Q&A
October 4, 2013
Answer: 
yes but it isn't designed that way. There is a knob that allows up and down movement, I loosened the knob and held the saw up and cut down intot eh tile, for a nice cut.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Colorado Springs, CO
Read all my Q&A
September 25, 2013
Answer: 
Yes you can. However the blade and motor do not have a spring to keep it from dropping so you have to control the plunge yourself.
+3points
4out of 5found this answer helpful.
Was this helpful?helpful4unhelpful1
This question is from 7 in. Tile Saw with Stand
 
9 answers

The specs on this saw list porcelain, glass, ceramic and pavers, will this saw cut through marble tile?

This question is from 7 in. Tile Saw with Stand
Asked by
Tennessee
Read all my Q&A
December 27, 2013
The online specs show this wet saw cuts procelain, glass, ceramic and paver tiles. It does not show that it cuts marble tile. I have 12"x12" marble tile to install in a bathroom floor. Will this saw cut through marble tile? If so- will I need to purchase a different saw blade or will the one that comes with the saw work on marble?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (9)

Asked by
Bel Air MD
Read all my Q&A
January 13, 2015
Answer: 
I had no problem cutting marble just don't push hard when cutting
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
coventry , ct.
Read all my Q&A
June 12, 2014
Answer: 
yes, marble is a soft material easily cut
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Seattle, Bitter lake Home Depot
Read all my Q&A
June 1, 2014
Answer: 
This saw should have no problem cutting through marble tile, included blade is cheap and may leave some small chipping but should cut through marble with ease. An investment in a higher quality blade would be prudent.
Basically any wet saw will cut all materials, some materials like glass may require different or specific blade.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Seattle, Bitter lake Home Depot
Read all my Q&A
May 31, 2014
Answer: 
yes, but accurate cuts are nearly impossible!
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2

Asked by
Granbury, TX
Read all my Q&A
March 18, 2014
Answer: 
yes, it will cut marble tile. Remember, the blade cuts the tile so use an appropriate blade for whatever material your cutting. The blade that comes with the saw will cut marble but may not last as long as some of the premium blades/
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Colorado Springs, CO
Read all my Q&A
January 23, 2014
Answer: 
Yes it will. I used it to cut some using the same blade it comes with.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Surprise, AZ
Read all my Q&A
Home Improvement Profile: DIYer
January 15, 2014
Answer: 
Yes it did. I am using 17 inch ceramic tile. Cuts it like butter.
-3points
1out of 5found this answer helpful.
Was this helpful?helpful1unhelpful4

Asked by
Nebraska
Read all my Q&A
Home Improvement Profile: Professional
January 5, 2014
Answer: 
It will cut marble and even granite, even though the blade supplied with the saw will cut through it I don't recommend it for marble if you want a nice clean cut. You have to invest on a good quality diamond blade for this kind of material since it's tougher to cut than ceramic or porcelain. Make a couple of cuts on a scrap piece before cutting your work piece, this is because the blades will chip the Read More
It will cut marble and even granite, even though the blade supplied with the saw will cut through it I don't recommend it for marble if you want a nice clean cut. You have to invest on a good quality diamond blade for this kind of material since it's tougher to cut than ceramic or porcelain. Make a couple of cuts on a scrap piece before cutting your work piece, this is because the blades will chip the material a little bit when they are brand new, but once you "smooth out" the blade it will cut nicely. Buy the continuous edge blade, not the notched one, they'll leave a rough edge on your marble.. Also make sure you let the saw do the work, don't force the material into the blade or push too hard, it will take a little longer to cut this kind of stone than to cut other tiles but it will cut it. Read Less
+6points
6out of 6found this answer helpful.
Was this helpful?helpful6unhelpful0

Asked by
Read all my Q&A
December 30, 2013
Answer: 
The RIDGID R4030 tile saw is designed to cut man-made tile, pavers, and stone tile products only.
-6points
0out of 6found this answer helpful.
Was this helpful?helpful0unhelpful6
This question is from 7 in. Tile Saw with Stand
 
7 answers

what is the widest cut you can make when ripping on fence?

This question is from 7 in. Tile Saw with Stand
Asked by
geo
wilmington,ma
September 2, 2013
can I cot a 20 inch tile down the center?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Seattle, Bitter lake Home Depot
Read all my Q&A
May 31, 2014
Answer: 
Saw does have the capacity to rip 24" however....bad tray guide design make for inaccurate rip cuts due to sloppy tray movement. 24" tile will also hang over tray unsupported aprox 10"
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Granbury, TX
Read all my Q&A
March 18, 2014
Answer: 
I cut 24" rips on this no problem. I think the actual spec is listed, but 24" is pretty close to the max if not it.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Maryland, USA
Read all my Q&A
December 24, 2013
Answer: 
SURE YOU CAN
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Sherman, Maine
Read all my Q&A
December 15, 2013
Answer: 
11 inches is longest to date
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
NW Arkansas
Read all my Q&A
December 6, 2013
Answer: 
its about 9" so you can cut an 18" tile in half
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
October 9, 2013
Answer: 
Yes it will take a 24" tile.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Colorado Springs, CO
Read all my Q&A
September 2, 2013
Answer: 
The saw has a birth of 13.4" from the mounting arm of the motor to the edge of the blade. So YES you can rip a 20 inch tile You can actually rip a 24 inch tile with it. The question you asked was ripping on the fence I assume your talking about the adjustable fence with angle gauge. This I wouldn't use for more than 8" as the sliding base won't support the fence piece securely as there isn't much for it Read More
The saw has a birth of 13.4" from the mounting arm of the motor to the edge of the blade. So YES you can rip a 20 inch tile You can actually rip a 24 inch tile with it. The question you asked was ripping on the fence I assume your talking about the adjustable fence with angle gauge. This I wouldn't use for more than 8" as the sliding base won't support the fence piece securely as there isn't much for it to hold on to beyond 8".
You can use this saw without the fence in fact most of my cuts I didn't use it. It was helpful for smaller repeat cuts so I didn't have to measure each one or for angles but for regular cuts and rips I take off the fence. The sliding platform/base which you set the tile on has a fixed edge in the back to hold the tile and it's 90 degrees to the blade.
I recommend you go down to Home Depot and look as the floor model and play around with the table to get an idea. But it is a great saw. Read Less
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
2 3 »
  • 2016-05-25 T16:14:21.882-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203757434, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 283ms
  • QUESTIONS, PRODUCT

CUSTOMER REVIEWS

Rated 4.1 out of 5 by 153 reviewers.
Rated 5.0 out of 5.0 by Best wet saw I prefer this one to the 10" one because the blade doesn't wobble as much. its very solid and sturdy and super light and portable. I've used full sized saws and I'd put this against them any day. it makes very clean cuts. it even cuts glass tile with very little chipping. April 11, 2016
Rated 1.0 out of 5.0 by The top knob that holds the saw down will break the knuckle mount making it worthless I tightened the top knob and it broke the knuckle mount. The lifetime warranty is very complex and rigid (no pun intended) It's nearly impossible to get it fixed without paying for the part. Be aware and avoid Ridgid if you want it to last and be supported. Don't be fooled by their "Lifetime Warranty" February 12, 2016
Rated 5.0 out of 5.0 by AWESOME Easy to clean up, easy to set up easy to use. Great purchase May 20, 2016
Rated 5.0 out of 5.0 by Worth worth it's weight in gold I was skeptical about buying this and then I ran into some tile guys on a job and asked him he said he had 3 of them so I figured it couldn't be that bad . I had a small Mk years ago it was loud and worthless I used this today I'm doing a upstairs job and didn't feel like messing with my Dewalt which is a good heavy duty saw but sometimes it's a bit much to load and set up for smaller jobs that's why I was looking at this Rigid. Now I don't expect it to last forever at this price point but it's definetly quitter running and cutting than my Dewalt it actually reminds me a a mini version in many ways. The laser feature is nice it seemed to cut straight and clean so far. Pump was a little weak at first but started working ok I ran it in a bucket not in the saw tray to save on mess and clean up. I would recommend it and hope it holds up I'd buy another even if this only gets me through a dozen jobs or so it'd be worth it April 25, 2016
Rated 4.0 out of 5.0 by a decent tile saw really easy to put together but like others have stated with long tile pieces the saw doesnt track a straight line. followed the instructions but there was just not enough adjustment. one of my hobbies is woodworking so i know how to adjust a table saw. there is a simple fix. i added a custom washer (i think .030 thick, i forgot) made form stainless shim stock under the forward mount bolt on the side of the mount arm (horizontal bolts). the shim goes between the rail and the saw arm to change the angle of the blade with the table. Additionally, i needed to add a washer under the laser adjustment bolt because the factory overtorqued the screw and left a screw head impression in the plastic laser mount. the laser always moved to the same spot slipping into the impression. then i adjusted the rails and laser so it cut 24 inch tile perfectly at the laser. if you cant cut longer pieces straight look to see if the blade is not perpendicular with the table. April 28, 2016
Rated 5.0 out of 5.0 by Great tile saw I upgraded from a small craftsman wet tile saw that I had used for 4 or 5 jobs and I was totally impressed. I love the rest of my ridgid products and was excited to get this tile saw for a bathroom remodel at my own house. Deffinetely saved some time upgrading my saw and everything functioned great. I also like the stand it comes with, great to have adjustable height. I used to work off of the ground or on saw horses. December 25, 2015
Rated 5.0 out of 5.0 by great saw for price Saw is easy to use without the laser. Well worth the purchase for do it yourself projects. Have not had any of the problems that others have mentioned. April 26, 2016
Rated 5.0 out of 5.0 by Awesome saw with minor adjustment As some had complained the sliding table has slop in it and there is no adjustment. I found a way and its simple so I'll share it on my Instagram at mustbelee. This way no one will miss out on a great tile saw for 300 bucks! April 26, 2016
  • 2016-05-25 T17:02:34.231-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_153, tr_153
  • loc_en_US, sid_203757434, prod, sort_default
2 3 4 5 6 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 67ms
  • REVIEWS, PRODUCT