Rated 4.2 out of 5 by 78
Rated 5.0 out of 5.0 by eairey3 Great saw for the price
This tile saw is great, although the splash extension could have engineered a higher back splash (minor issue). I like that I can do plunge cuts in tile for project boxes without have to cut through to the edge. The 8 inch blade has a limit of working with 24 inch tiles, but the smaller blade is more precise when plunge cutting. The built in laser is helpful in double-checking your cutting where you want. The drain makes it easy to change water without having to disturb the work site. Get a quick inline garden hose shut off for the drain for maximum flexibility when draining. Overall, a great product for the price.
January 3, 2016
Rated 5.0 out of 5.0 by jcurtis3155 Very Nice Wet Saw
Well thought out design. First use was cutting 24" porcelain tile and had no problem. Easy to clean and store. I had an old school big bulky tile saw and was hesitant because it still worked, but I so glad I made the purchase.
May 3, 2016
Rated 3.0 out of 5.0 by vico ok
so many crevices and grooves makes it really hard to clean and maintain a good appearance, a very noisy motor and a click or jump in the cart as you slide the tile thru the blade gives you imperfect cuts.
May 17, 2016
Rated 4.0 out of 5.0 by BrightEyes One tile job done, wet tile saw worked great for 6 in x 24 in tiles!
The 8in wet tile saw by Rigid so far has worked very well. It was easy to assemble (about 35 min). I checked the blade and tray for squareness and it was right on!
Cross cutting the porcelain tiles was a breeze. But since the ends of the tiles were not perfect it was harder to line up for the 24in rip cuts. The laser sight did help once I made some test cuts to understand where the actual blade cut the material in relation to the laser. However, with these long tiles the beginning parts of the cuts were a little wobbly due to tray only being on with 1 set of wheels. Once more sets of wheels were engaged, the cuts were perfect.
Just wished I had a short length (3 or 4 foot) of hose to make it easier to drain !
March 15, 2016
Rated 4.0 out of 5.0 by Motobeagle Good Buy
I have used for two major bathroom remodels for both walls and floors. First off with 13 inch tile and less for the noney you cant beat it. 24'inch tiles well it will do it but a bit of a reach for this. Take your time but it is tricky. now 13" or less this is the bomb. Perfect for cutting angles, plunge cuts for boxes and plumbing relives from purchasing abrasive hole saws. I screwed 2 tiles up over 1000 square feet and it was my fault. Bearings get loud quick but work fine. If you know to let the tool work it works well at a slow consistent rate at perpendicular cuts as well as angles. LET THE TOOL WORK. Plunge cuts and a tile nipper will save you tiles and aggravation. Dare I say maybe fun. I have been doing tile since scoring it and break.
March 22, 2016
Rated 3.0 out of 5.0 by ratcliffbrando bad bearings
Not for everyday use, ive had 3 and bearings on the armature assembly went up in two of them ,one went up a second time after it was replaced once. Working with the 3rd which was a replacement and it sounds like they are getting loose in this one too. Other then that fine saw just wish they would figure something out to stop the problem from happening for future buyers
December 29, 2015
Rated 4.0 out of 5.0 by Spartan11 Good Saw
The saw cuts well however....when you cut a tile you have to cut very slow to keep the cut straight. You may even have to turn the tile clock-wise or counter clock-wise a hair to keep your cut straight. Once I slowed down my cuts and i would tweek the tile a hair one way or the other all of my cuts were perfect! Another complaint I read was the water supply line being kinked. Yes...mine was also kinked. I put my heat gun on it for a few minutes and the kink came right out. 8" blades are hard to find. I bought 3 at Home Depot when I bought the saw. There and on the internet are the only places I have found them.
January 21, 2016
Rated 2.0 out of 5.0 by mike NICE SAW; LOUSY REGISTRATION PROCESS!
The saw does a nominally good job of cutting 24" tile, just relieve the cantilever to avoid nicks.
The product registration process is terrible; the software drops the register code and you repeat, repeat, and repeat. Customer service representative is clueless, and the store staff cannot intervene. Superintendents spend more time trying to register the tool on a prevailing wage project than the tool costs. [Rant OFF]
February 24, 2016