Model # GXB-450

Internet #202520451

Store SKU #103001

ROCKFORGE 72 in. San Angelo Digging Bar
0823756202289

ROCKFORGE

72 in. San Angelo Digging Bar

Was  $15.98
$0.98 /each

Save $15.00 (94%)

Frequently Bought Together

Product Overview

Our ROCKFORGE 17 lb. x 72 in. San Angelo Digging Bar is designed to perform in the toughest Landscape, Construction and Jobsite conditions. Use with confidence for leveraging and demolition projects. All ROCKFORGE tools are manufactured to the highest standards and designed to meet and exceed all ANSI specifications.

  • 72 in. L to extend reach
  • Drop forged, 1 in. hex and hardened carbon steel ends for superior wear and long service life
  • Pencil point for easy soil penetration
  • Wedge end for prying, levering and cutting roots
  • 17 lbs. drives into the soil
  • Black finish prevents rusting

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Where's it made?

Asked by: Crash
As I did some searching I found that most likely they are made in India. If it was U.S. made it would be 3 times the price.
Answered by: Jake
Date published: 2016-02-04
  • y_2017, m_2, d_20, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_, sid_202520451, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • QUESTIONS, PRODUCT

Customer Reviews

72 in. San Angelo Digging Bar is rated 2.9 out of 5 by 10.
Rated 4 out of 5 by from Knowing how to use makes the difference. This is not a pry bar. The spade end is for cutting through roots you can't get to with an axe (Keep it sharp). The pointed end is for busting through concrete and then prying the chunks out. At 17lbs, using this properly and vigorously will change you from a girly man and pump you up. If you try to use this to pry a stump out of the ground without chopping through the root ball, yes, it will bend. Try using your wood-handle shovel! Someone reviewed this and said they bent the bar 90 degrees. Duh. I have one of these in CA and have used it many times as described above to remove Cypress and Ficus stumps. And yes, it bent slighty, but rotate it against the bend, and it corrects. In CO, I have surface rocks in a gravel road up to 12" in dia. If am lucky enough to get one of these bars at my local HD, it'll make short work of those bruisers. Everyting has limits. There's no substitute for knowing what you're doing. BTW, I'm 65!
Date published: 2015-09-21
Rated 5 out of 5 by from Beats using a power auger in GA clay First I tried using a post hole digger in my GA clay (rock hard) soil. No luck. Then I rented a power auger. It made holes about 10 inches deep, but couldn't go deeper. A guy at Home Depot recommended using this to break up the clay, then use the post hole digger. That combination worked great. I was able to dig the 2 foot deep holes I needed.
Date published: 2012-11-09
Rated 5 out of 5 by from Did the job. My ground is like rock and this worked great breaking up the ground.
Date published: 2015-07-23
Rated 1 out of 5 by from This thing is junk My yard is full of rocks and I bought this because I was sick of borrowing my brother in laws. First day, first task, it bent on me. I wasn't even using it on rocks, just trying to remove a stump. No heavy strain, certainly not the level to which I felt I was abusing it. Check the details, no warranty, that should tell you something.
Date published: 2013-05-07
Rated 1 out of 5 by from Bent On First Use I bought this bar to take in the truck off-road. The very first time I pulled it out of it's plastic sleeve and put it to use, I bent it! I've got pinch bars from years ago that aren't quite as long but are rock solid. I'm returning this to Home Depot as defective. The quality control of heat treating must have been off.
Date published: 2014-02-02
Rated 1 out of 5 by from Bent like plastic Bent to a 90 degree angle in light soil in the back yard trying to lift a 5 gal size lemon tree. Very poor quality and a waste of $31.
Date published: 2013-05-18
Rated 1 out of 5 by from Despite appearances, it's not strong enough for prying OK for cutting small roots that a post-hole digger can't cut, but it bent the first time I tried to pry up a 10" stump with it (and I'm 52 years old). Amazingly weak metal - do not pry with it.
Date published: 2014-08-09
Rated 5 out of 5 by from Well worth the price... While this is a simple tool, it is well built and well worth the price. It makes quick work of breaking up hard ground and is less of a strain on your back than a pick.
Date published: 2012-08-14
  • y_2017, m_2, d_20, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_, sid_202520451, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 78ms
  • REVIEWS, PRODUCT