Model # 40C73P174

Internet #202366768

Store SO SKU #1000942417

ROPPE 700 Series Smoke 4 in. x 1/8 in. x 48 in. Thermoplastic Rubber Wall Base Cove (30-Pieces)


700 Series Smoke 4 in. x 1/8 in. x 48 in. Thermoplastic Rubber Wall Base Cove (30-Pieces)

$8997 /carton

Frequently Bought Together

Product Overview

ROPPE's unique blend of thermoplastic rubber and vinyl makes the 700 Series an attractive and economical choice for a variety of applications. With its moderate pricing, our 700 Series wall bases is an outstanding selection for any installation. This is extremely durable, attractive and moderately flexible for all your installation needs.

  • Dimensional stability precise gauging and uniform height help conceal floor and wall irregularities
  • Homogeneous color is inherent through the base and superior finish resists scuffing gouging and most chemicals
  • Meets FloorScore and CHPS criteria
  • Smooth pattern creates a nice finished edge between the floor and wall
  • Intended for commercial or residential use
  • Ribbed back for positive adhesion and top-lip design that helps base fit tightly against wall
  • 48 in. length
  • Smoke in color

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

How do you cut for an outside corner

How do you cut for an ourside corner to give it the same look as professional installers?
Asked by: BillyBob
Thank you for your recent request, see below. Installation of Job-Site Formed Outside Corners 1) Position the wall base tight against the wall and mark the length on the back side of the wall base with a pencil utilizing the wall as a guide. 2) Position wall base with the back side up on a flat stable surface. 3) Utilize a top-set gouge to remove approximately 30% of the wall base’s thickness along the pencil line on the side of the line in the direction the wall base will be installed. Remove the excess on each side of the grove just above the toe of the wall base. 4) Utilize top-set gouge to make two stress relief gouges above the wall base toe approximately one-inch from the bottom of the Vertical Gouge Line. Stress relief cuts should be approximately one-inch long. 5) Fold back wall base to pre-form the corner. The toe is to be rolled upwards which will assist in contouring. The top edge of the cove base should fit tight against the wall’s surface and the wall base toe should be rounded and sitting flat against the floor. 6) Apply adhesive to the back of the corner with either a 1/8” saw-tooth trowel or from cartridge nozzle and then spreading with a 1/8” saw-tooth trowel to ensure 90% coverage of adhesive while not spreading within 1/4" of the top of the wall base corner. 7) Install the wall base corner as you would a factory corner above.
Answered by: ROPPE CSR
Date published: 2016-12-12


Asked by: GERRY
Don't use Liquid Nails Construction Adhesive! It won't work, and it will distort the wall base product something awful. Home Depot stocks a specific adhesive for gluing vinyl & rubber wall base: 'Roberts #7200'; it comes in 30oz cartridges, and also in quart, gallon, and larger tubs. You'll need to use a notched applicator to apply the adhesive if you purchase it in a pail - get a 3/16"x4/32" V notch applicator (approx $3.00). If you intend to use the 30oz cartridge, make sure you get the 'Snozzle Cove Base Adhesive Cartridge Spreader & Applicator' - also made by Roberts (less than $3.00) You'll find these products in the vinyl flooring dept.
Answered by: Bill
Date published: 2017-06-13
  • y_2017, m_6, d_25, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_202366768, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 95ms

Customer Reviews

700 Series Smoke 4 in. x 1/8 in. x 48 in. Thermoplastic Rubber Wall Base Cove (30-Pieces) is rated 4.5 out of 5 by 2.
Rated 4 out of 5 by from Very flexible, easy to cut to size and easy to glue to wall. Color matched pictures on web. It was flexible enough to bend for some corners and easy to cut and fit into others. I was pleased that it also stuck so well to the wall and floor, with it being so flexible I was concerned it might peel off, but it has been several weeks and it is on solid and looks great.
Date published: 2012-02-15
Rated 5 out of 5 by from Love,but can't return leftovers? i realy love the look an everything about this product, But you can't return any leftovers? I'm stuck with almost half a box 14! but can only buy a box of 30??
Date published: 2015-01-20
  • y_2017, m_6, d_25, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_, sid_202366768, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 96ms