Model # T22-50S

Internet #202078384

Store SKU #535085

Rain Bird 1/4 in. x 50 ft. Distribution Tubing

Rain Bird

1/4 in. x 50 ft. Distribution Tubing

$4.27 /each

Frequently Bought Together

Product Overview

1/4 in. O.D. exterior grade tubing for use in positioning spot watering emitters and other drip irrigation devices around plants. Connect with Rain Bird 1/4 in. barbed fittings and stakes.

  • Great for drip and micro irrigation
  • 50 ft. coil
  • .245 in. O.D., .165 in. I.D.
  • 70 psi pressure rating
  • Use with 1/4 in. barbed fittings and stakes




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Can i use it for a inground rotary sprinkler

Example: I have looked at the manual and can't figure out what I did wrong.
Asked by: Skyler
Most of the Rain Bird in-ground rotary sprinklers have a 1/2" inlet. 1/4" distribution tubing would not allow for sufficient water flow to run a rotary sprinkler, especially if there was more than one sprinkler in the line, if the distance covered was great, or if the tubing went uphill. The best way to support rotary sprinklers is with 3/4" or 1" pvc pipe that connects down to the 1/2" size of the rotary sprinkler.
Answered by: Rain Bird Marketing
Date published: 2017-01-25
  • y_2017, m_4, d_24, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_, sid_202078384, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 84ms

Customer Reviews

1/4 in. x 50 ft. Distribution Tubing is rated 4.0 out of 5 by 1.
Rated 4 out of 5 by from Works OK, Good Value I bought this tubing for use in my mist-cooling watering system in my rabbit barn. I used it for the main trunk line. When I got into the project I found my misters were in fact 5/16 barb and not ¼, so I had to work them down with sandpaper as this tubing is not very pliable and is rather unyielding. I used one of Rail birds’ ¼ barb ball valves for a supply valve and another at the end of the line to cap it off. They work great?
Date published: 2014-08-04
  • y_2017, m_4, d_24, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_, sid_202078384, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 134ms