Rain Bird

Model 1800CAPOFF

Internet #202262480

Store SKU #883490

Sealed Cap for 1800 Series Body

$1.57 /each

Frequently Bought Together

Product Overview

This 1800 Series Xeri-Cap is used to retrofit a spray head system to a Xerigation system by capping off any unused 1800 Spray Heads (spray head not included). The cap is for use with drip conversion kits (sold separately). Easy to install.

  • Helps eliminate the need for a new drip system (drip system sold separately)
  • Seals off 1800 series spray heads on a spray zone (spray heads not included)
  • Use to retrofit an existing underground watering system
  • Primary application: Residential installation




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

1 Question1 Answer

Customer Questions & Answers

Sealed Cap for 1800 Series Body
Sealed Cap for 1800 Series Body

Ask your questions. Share your answers.

Clear Search Term
This question is from Sealed Cap for 1800 Series Body
1 answer

Does this cap screw on top of the entire sprinkler body head or does it replace the nozzle?

This question is from Sealed Cap for 1800 Series Body
Asked by
Read all my Q&A
May 16, 2016
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Camarillo, CA
Read all my Q&A
Home Improvement Profile: DIYer
May 28, 2016
It screws on top of the sprinkler body; you remove the existing cap/nozzle/spring assembly and replace it with this product. This provides a reasonably clean look and makes sure that the sprinkler doesn't leak any water at all.
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
1 of 1
  • 2016-09-08 T11:47:39.187-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202262480, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 39ms

Customer Reviews

Rated 4.6 out of 5 by 18 reviewers.
Rated 5.0 out of 5.0 by Perfect! Just a few years late... Compared to the original method of unscrewing the sprinkler and trying to cap the PVC pipe below grade when you want to eliminate sprinklers, this is a brilliant No-Brainer!!! I've used these to cover both sprinklers that I never plan to use again, as well as ones I MIGHT.... What's kinda' amazing is that the original sprinkler units never had an O-Ring gasket at the top, but these caps DO. They're never gonna' leak....... 80) August 16, 2016
Rated 1.0 out of 5.0 by Leak like crazy No point in buying these (I bought 11). You cannot get them sufficiently sealed to prevent water from running out. O-rings are flimsy. July 27, 2016
Rated 5.0 out of 5.0 by Works well These work great to cap off 1800 sprinkler heads. Very easy to install. Two tips to avoid leaks: make sure the gasket is in place and use Teflon tape. July 22, 2016
Rated 4.0 out of 5.0 by Caps work as intended Only difficulty with product is getting little green o-rings in correct location to make a proper seal. July 13, 2016
Rated 5.0 out of 5.0 by Great product Very easy to install, gets the job done. Perfect if you want to temporarily or even permanently plug a sprinkler. June 7, 2016
Rated 5.0 out of 5.0 by These are great for use in a drought; it is surprsing that HD stores don't carry them. These sprinkler caps are a great way to seal off a sprinkler without the fuss of digging it out completely in order to cap the riser. It is quick and painless to take a few sprinklers out of a zone with this, and just as quick to put them back in the zone when required. Surprisingly, these aren't sold in Home Depot stores, only online. Buy a bunch - they're cheap and I'd wager that you'll use more than you think you will (that was certainly my experience). May 24, 2016
Rated 5.0 out of 5.0 by Works perfectly! Precisely what I needed. Easy to install, works with all my 1800 series heads. Certainly a much better alternative to digging up nozzle, installing taller riser, then capping off with PVC cap. Which in retrospect, is a silly method of capping off a sprinkler head. August 5, 2015
Rated 5.0 out of 5.0 by nice way to turn off irrigation sprinkler heads You just unscrew the current cap on the pop-up sprinkler pipe coming out of the ground, lift out the sprinkler rod and spring, and put the new solid cap on the pipe. This effectively suppresses this head. No need to dig out the whole device. April 5, 2016
  • 2016-09-08 T12:09:04.526-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_18, tr_18
  • loc_en_US, sid_202262480, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms