Ramset 3 in. Drive Pins with Washers (100-Pack)-07886 - The Home Depot


Model # 07886

Internet # 100067384

Store SKU # 625354

3 in. Drive Pins with Washers (100-Pack)

Ramset 3 in. Drive Pins with Washers (100-Pack)

This item has been discontinued.
The Home Depot no longer carries this specific product.

$15.97 / each


Model # 07886

Internet # 100067384

Store SKU # 625354

Ramset Drive Pins are designed for fastening applications in concrete and steel. They are specifically fabricated for toughness and durability and are able to penetrate dense concrete and structural quality steel. Ramset assures consistent, optimum quality in every fastener. Recommended applications include 2 x 4 framing, attaching electrical boxes, and installing drywall track and plywood sub-flooring.

  • For use with Ramset powder actuated tools for fastening applications in concrete and steel
  • For attaching 2 x 4's to concrete
  • Washer increases bearing surface against material to be fastened
  • Durable design

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Assembled Depth (in.)  .875 in  Assembled Height (in.)  3 in 
Assembled Width (in.)  .875 in 
Fastener Type  Powder Actuated Fastener  PAT Pin Use  Steel & Concrete 
Package Quantity  100  Product Weight (lb.)  .026 lb 
Returnable  90-Day 
Warranty / Certifications
Manufacturer Warranty  None 


Rated 5 out of 5 by 2 reviewers.
Rated 5 out of 5 by Fast way to anchor in concrete I used both the 3" and 2 1/2" nails with the Ramset Master Shot tool. The one with the pistol grip. Iused the #4 charges (yellow) and that does not always set the nail flush to a 2x4. So I used a charge of the #3 (green) for the second shot and it works like a charm. Sometimes a bit too well. No bent or broken nails and all are staying in place. Drilling a hole for a 3" Tapcon screw taks about 10 minutes. Too much work. The ramset is a real time and energy saver. Near an outside corner I do recommend drilling a hole instead of the Ramset nail to avoid breaking off the concrete at the corner. Builiding an insulated wall in the basement. For the footer I am placing about one nail (2 1/2") every 4 feet. For the 2x3 furing strips I am using one nail (3") each with shims behind to account for an uneven concrete wall. And two nails on the end pieces just to keep them ridgid. December 10, 2014
Rated 5 out of 5 by Work great Not a whole lot to say about these: they pound into concrete nicely and are easy to use. We are using them while finishing our basement, and so far no problems. April 1, 2014
1-2 of 2


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.