Model # 00022

Internet #100091715

Store SKU #107708

Ramset HammerShot 0.22 Caliber Single Shot Tool
0092097000223

Ramset

HammerShot 0.22 Caliber Single Shot Tool

  • Fewer misses with large striking surface
  • Greater comfort with impact resistant handle and finger grooves
  • Enhanced versatility with 2-1/2" pin capability
$25.98 /each

Frequently Bought Together

Product Overview

The Ramset Hammer Shot 0.22 Caliber Single Shot Tool is a hammer-actuated tool utilizing 0.22 caliber loads. This tool is great for small DIY projects. The HammerShot can easily fasten up to 2-1/2 in. drive pins.

  • Hammer actuated tool with a barrel design that allows for easy horizontal and overhead fastening, up to 2-1/2 in. drive pins
  • For small DIY projects, such as fastening two by fours and furring strips to concrete in basements or room additions
  • Impact-resistant handle with contoured grip
  • Larger strike nut than the HD22
  • Licensing required
  • Requires Powder Actuated Tool Licensing – Click Here To Apply

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

CAN I USE THIS TOOL TO INSTALL TACK STRIP INTO CONCRETE FLOOR

Asked by: BIGDOG1
How thick is the tack strip? It works great with 2 x 4s. And it might work well with thinner strips if you use a lower power shot. Ramset sells shots of several different strengths. I used #4 for 2x4s into concrete and it was plenty.
Answered by: Noname
Date published: 2016-11-08

Can I use this to fasten 2x4's, or is it too powerful?

Asked by: Jim
Works great for that.
Answered by: cnsrtv1
Date published: 2016-12-27

In the description it says it can fire up to 3" pins, but later it says up to 2 1/2" pins. Can it do 3" or not?

Asked by: Jb
We used 3" nails with it and the corresponding "bullets" that say they can drive the 3" nails. It drove the nails into new concrete very well, but old concrete was too hard for it and just bent the nail.
Answered by: Heather
Date published: 2017-03-14

What size loads do you use in 1 inch furing strips on concreat walls ?

Asked by: Pistalpete
That is more a function of the walls hardness. I was putting 3/4" in boards on to poured concrete. #3 loads wouldn't do it, had to use #4.. If cement block I would try #2 and go to #3 only if that didn't work.
Answered by: Pat
Date published: 2017-02-07
  • y_2017, m_4, d_24, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_, sid_100091715, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 125ms
  • QUESTIONS, PRODUCT

Customer Reviews

HammerShot 0.22 Caliber Single Shot Tool is rated 4.3 out of 5 by 97.
Rated 3 out of 5 by from We used this when framing walls to finish our basement. We bought 3" nails for it. On the porti... We used this when framing walls to finish our basement. We bought 3" nails for it. On the portions of the floor with new concrete it worked very well and drove the nails all the way in. In the 50 year old concrete areas the nail made a dent in the concrete and then bent over. We ended up using a combination of this and Tapcon screws depending on which concrete we were attaching to. Overall it was worth the money because it saved us time on a good portion of the attachments we needed to make.
Date published: 2017-03-14
Rated 1 out of 5 by from piston blew through on very first firing. I purhased this tool to use as intended, attaching 2x4's to concrete as i am a tile contractor and build a lot of master bahrooms and kitchens. I was framing into a 18" box in the foundation around the shower center drain, glueing and attaching via these 2-1/2" stud nails. Ive used these many times before. I read the instructions anyways. After a normal load and a single shot by my 1lb wussy hammer, it fired and blew the piston straight out the end and mushroomed the orange cusion and washer, it did drive the nail, about 1/2" in below the stud surface. I was using the yellow .22 cartidges as its described. Now i have to go back to HD 55 minutes away and try and exhange it for a higher model that hopedully will do its job. Dont be cheap. A lesson I already knew but figured since i almost never need this tool I wluld get my use out of it.
Date published: 2016-12-21
Rated 5 out of 5 by from Met expectations - seems to be better made than the... Met expectations - seems to be better made than the Remington model it replaced. Spray the moving parts with some penetrating oil or CLP after every 10 shots or so and never jams. It's the most basic RamSet, so don't expect anything fancy, but it does what it's supposed to.
Date published: 2017-03-14
Rated 5 out of 5 by from The cheapest of the Ramset tools, but worked as expected. Building a basement bedroom, and this e... The cheapest of the Ramset tools, but worked as expected. Building a basement bedroom, and this easily drove 3 inch ramset spikes through pressure treated 2x4 into poured basement floor with the yellow loads.
Date published: 2017-03-07
Rated 4 out of 5 by from Needed to affix some boards to poured concrete basement walls. Did the job. Walls exceedingly h... Needed to affix some boards to poured concrete basement walls. Did the job. Walls exceedingly hard. Have worn out masonry bits trying to drill. Did the job
Date published: 2017-02-07
Rated 4 out of 5 by from Great value Only had 1 not fire, most likely due to not enough powder in the shell. I would not waste more money on a more expensive product unless using it often.
Date published: 2017-02-15
Rated 5 out of 5 by from Five star This is an awesome tools I ever had ,its very easy to use, work what I want,Every home owner must keep this tool for any concrete fastening
Date published: 2017-03-08
Rated 5 out of 5 by from Works great, Just make sure that you check the package to determine what level of load you need t... Works great, Just make sure that you check the package to determine what level of load you need to buy for your application.
Date published: 2016-11-08
Rated 5 out of 5 by from Worked as advertised. Using the proper charge cartridge is a key to successful use. Worked as advertised. Using the proper charge cartridge is a key to successful use.
Date published: 2017-04-11
Rated 5 out of 5 by from This product works great. Make sure to wear hearing protection and goggles. This product works great. Make sure to wear hearing protection and goggles.
Date published: 2017-03-14
Rated 5 out of 5 by from 5 Star Review Rating provided by a verified purchaser
Date published: 2017-04-04
Rated 4 out of 5 by from 4 Star Review Rating provided by a verified purchaser
Date published: 2017-04-05
Rated 4 out of 5 by from 4 Star Review Rating provided by a verified purchaser
Date published: 2017-04-22
Rated 5 out of 5 by from 5 Star Review Rating provided by a verified purchaser
Date published: 2017-04-05
Rated 4 out of 5 by from 4 Star Review Rating provided by a verified purchaser
Date published: 2017-04-21
Rated 5 out of 5 by from Easy to us right out of the package. ... Easy to us right out of the package.
Date published: 2017-03-28
Rated 5 out of 5 by from Easy to use, worked as advertised. Easy to use, worked as advertised.
Date published: 2017-01-31
Rated 5 out of 5 by from the gun worked as advertised the gun worked as advertised
Date published: 2017-03-28
Rated 5 out of 5 by from Easy to use... Easy to use
Date published: 2017-04-18
Rated 4 out of 5 by from You get what you pay for. It's not fancy. It's not automatic. And admittedly it's sort of a pa... You get what you pay for. It's not fancy. It's not automatic. And admittedly it's sort of a pain sometimes to get the spent cartridge to eject properly. However I'm a homeowner not a contractor and my need for punching nails through cement is limited. I couldn't justify spending over three times as much for a more user-friendly version and, quite frankly, I'm glad I didn't. This thing works fine. It is reliable, safe, and consistent. The striking plate for the hammer is large enough that with a little practice it only takes one swing and it fires. I'm using it to frame walls in my basement gym and I agree with what another reviewer said about using the correct charge cartridge. I purchased the number 4's thinking they would drive 3 inch nails through a 2x4 into my basement floor. They did; however, not to the point that the nail was flush with the wood. It still holds and it isn't a big deal because it will all be hidden behind drywall, but I wish I had purchased the higher capacity cartridge. The tool itself; however, works for me. I'm giving it a 4 star because occasionally the spent cartridge sticks in the barrel. I just keep a small pliers with me when I'm using it to pry it out. It's an inconvenience more than a nuisance, and overall I'm quite happy with my decision.
Date published: 2017-04-14
Rated 5 out of 5 by from Put down the hammer drill and go to Home Depot! I started trying to anchor a stud wall into concrete with a hammer drill and a masonry bit with some anchor screws. Had a fit with it, went and got this tool and the 3" washer head nails, and let me tell you--worth every dime! The total time it took me to put in about a dozen or so anchors was about 6 minutes. It could not be easier. I did have to finish a couple of them with a regular hammer, as they stayed raised about 1/4" above the wood, but that was absolutely no problem. Highly recommended!
Date published: 2012-09-03
Rated 5 out of 5 by from Good product at a great price! So much cheaper than the fancy other guns...It is loud, but hey it uses a gun cartridge. Buy all three levels of gun cartridges that come for it as some concrete and material is tougher than others. I bought the strongest and the concrete was not as tough. The nails were sinking to far in. Buying all three kinds lets you adjust without heading back to the store or delaying.
Date published: 2016-09-20
Rated 5 out of 5 by from HD22 great for household use The 21$ for this Ramset is a DEAL! If you are just doing small jobs or work on your own home this is the tool for you. I used this too to drive 3" washer head nails thru 2x4 pressure treated into concrete. #4 charge The package says only 2.5" ... but 3" works great! Oh the Ramset website it says the 3" washer head nails fit this nailer ... go figure. I then used 2.5" for 2x2 furring strips into the walls. This needed some skill as the 2x2's were free to move around. You do need a hand for the tool and a hand for the hammer. And an elbow for the 2x2 ... or a buddys hand to hold the wood. But if its just a basement room or what ever this is no problem. You could always tape or use liquid nails to hold the wood too. This tool is not going to wear out quickly. Do not worry about the 90 day warranty. The design is so simple and durable it should last for years. The steel is not going to wear out easily. The plastic handle is hard durable plastic and should last a long time. By the way the more expensive guns are plastic too. For 21$ you will spend about the same in fasteners and nails for the first 100 nails you set. You cant get much more economical than that.
Date published: 2010-03-19
Rated 3 out of 5 by from Good for a minute Used this to frame bathroom in my basement. Concrete was almost 60 years old, worked on some newer concrete but couldnt make it through on the older concrete. Tossed this and picked up the trigger action Ramset and havent had any issues since.
Date published: 2016-08-11
Rated 5 out of 5 by from Great Tool Works great. Saved me a ton of time over drilling holes to anchor steel mesh to concrete wall. I put in over 200 nails Only a few that needed an extra shot.
Date published: 2016-08-02
Rated 5 out of 5 by from Cheap but it works Only had to ramset a couple boards where cement screws wouldnt bite. Basic but goes kaboom every time. As long as you dont baby tap the pin
Date published: 2016-06-24
Rated 4 out of 5 by from Worked at expected The tool worked fine It does what it is supposed to do. Easy to load not quite like my old one 60+ year old but good.
Date published: 2016-05-17
Rated 5 out of 5 by from Reliable product I purchased this to finish a small reno and it did exactly what it was supposed to do . Easy and safe to use.
Date published: 2016-06-29
Rated 4 out of 5 by from I needed to replace some framing to a concrete slab because the old framing had rotted away. At first I tried to use sleeved anchors. The first one went in fine. By the second hole though, the bit was shot and couldn't make it deep enough into the slab. I don't own a hammer drill, which may have been part of the problem. I was considering getting another masonry bit but at 1.5 holes per bit before it got too dull to make a deep enough hole, it didn't seem worth it. The slab might have been pretty tough since I've never had this problem drilling into other masonry. For $20 (at the time of writing) this seemed like a great alternative. Not too much different then getting the extra bits to go through this tough slab. One of the more expensive models might be better if you're going to use this frequently as the other reviewer mentioned. But for me, this worked out great. Loading the round, the nail and striking the tool was a lot faster than drilling a whole, hammering in the bolt and tightening the nut of the method I first tried to use. There is a guide that tells you which grade charge to use with what type of fastener depending on what types of materials you are joining together. It is important to get the right grade charge so you have enough force to drive the fastener all the way in, without being too powerful and blasting the fastener right through the material.
Date published: 2008-02-11
Rated 5 out of 5 by from Best bang for your buck (no pun intended) I readly admit I was lazy and was not about to predrill into cement and them screw in tapcons. There had to be another way and this is it. I'm glad I did some home work and found this. Its hard to believe the quality you get for the price. I just finished using it to put furring strips up in my basement. One wall took about 1 1/2 hours (not counting adhesive preping) you should do that first so you don't have to hold the strips or else its a 2 person job.. Once you find the sweet spot with the hammer things will go quickly. I think my arm will be a bit soar tomorrow but Im not complaining. the alternative would have been worst.
Date published: 2013-01-29
  • y_2017, m_4, d_24, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_97
  • loc_, sid_100091715, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 183ms
  • REVIEWS, PRODUCT