0042269651470

Red Dot

Model # S419E-R

Internet # 100116089

Store SKU # 457464

2-Gang Switch/GFCI Weatherproof Cover

$12.16 /each

Frequently Bought Together

Product Overview

The Red Dot 2-Gang Switch/GFCI Weatherproof Cover protects wiring devices in dry, damp and wet locations. The box is made of die-cast aluminum with a silver metallic finish. Designed for use with 2-Gang switch and GFCI device boxes, the cover mounts directly on a device for convenient installation and is UL listed for safety.

  • Protect wirings devices in dry, damp and wet locations
  • Made of die-cast aluminum with a silver metallic finish
  • Designed for use with 2-Gang switch and GFCI device boxes
  • Mounts directly on a device with screws and gaskets (included)
  • UL listed for safety
  • Note: product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.) 
4.75 
Product Height (in.) 
Product Width (in.) 
4.75 
Trade Size (in.) 
Other 

Details

Color Family 
Metallic 
Electrical Product Type 
Cover 
Material 
Aluminum 
Number of Gangs 
Package Quantity 
Paintable/Stainable 
No 
Product Weight (lb.) 
.405 lb 
Returnable 
90-Day 

Warranty / Certifications

Certifications and Listings 
1-UL Listed,CSA Listed 
Manufacturer Warranty 
NO 

More Products With These Features

Search

Customer Questions & Answers

1 Question1 Answer

Customer Questions & Answers

2-Gang Switch/GFCI Weatherproof Cover
2-Gang Switch/GFCI Weatherproof Cover

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
 
1 answer

do this cover fit an appleton box

This question is from 2-Gang Switch/GFCI Weatherproof Cover
Asked by
albany ga
Read all my Q&A
February 12, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

February 16, 2015
Answer: 
It should as long as the dimensions of the box align with the dimensions of the cover.
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2
1 of 1
  • 2016-07-27 T12:53:55.811-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100116089, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 58ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.4 out of 5 by 5 reviewers.
Rated 4.0 out of 5.0 by Finally figured it out It took hours of cursing and research but I finally found the 04/02/2013 review by Villian. Thanks for the tip, Villian. I had to hacksaw the ears off my switch. It didn't have the usual perforation. If you carefully, and I mean carefully, look at the diagram that came with the cover, you will see the where the two brass spacers and long screws go. One additional comment: My circuit is protected by a GFI breaker in the load center. This cover will not accept a standard outlet. Only a GFI outlet can be used since the necessary "nuts" that hold the outlet are built into the GFI outlet. So I am unnecessarily doubly protected. Too bad RedDot/Home Depot don't have a model with a switch and standard outlet. September 6, 2015
Rated 1.0 out of 5.0 by Terrible design.. This outdoor cover looks like an easy install, but boy was I wrong. The engineers who designed this should be ashamed. No where on the label does it say you need to modify the separately bought switch. You have to cut off the bunny ears and I had to cut the actual switch part that goes up/down in half and it still doesn't operate smoothly. Red dot should manufactor their own proprietary switch for use with this cover.. Buy this and you will understand what I'm talkin about, lol. At least the outlet portion of it works, kinda hard to screw that design up.. April 3, 2015
Rated 4.0 out of 5.0 by 2 gang switch cover The cover is a little tricky to put together when used with a 2 gang outdoor box. The trick is to put the gasket on the back of the cover then attach the switch to the back of the cover using the two spacers and screws that come with the cover. The switch must have the mounting ears removed also, then the wires can be attached to the switch. Then the trick is to turn the plate at an angle to allow the switch to fit between the top and bottom edges inside the box to get passed them. Once that's done straighten it up and mount the cover with the four remaining mounting screws. April 2, 2013
Rated 3.0 out of 5.0 by Did not fit switch. The switch cover did not fit on top of the switch. When screwed down tight the light switch would not work. I purchased a different kind (at Home Depot) and it fit perfect. January 17, 2012
Rated 5.0 out of 5.0 by Just what I needed Exact fit for defective cover plate I needed to replace October 5, 2011
  • 2016-07-27 T12:28:16.557-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_5, tr_5
  • loc_en_US, sid_100116089, prod, sort_default
1-5 of 5
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • REVIEWS, PRODUCT