0815181010232

Suggested Replacement

7,500-Watt 30 Amp 10-Circuit Outdoor Transfer Switch
  • Reliance Controls
  • Model # R310A
  • Internet # 206556344

7,500-Watt 30 Amp 10-Circuit Outdoor Transfer Switch

$445.22 /each

Compare to Discontinued Model View Product

Discontinued Model

Discontinued

Reliance Controls

Model # R30310B

Internet # 202216475

10 Circuit Outdoor Transfer Switch

This item has been discontinued.
The Home Depot no longer carries this specific product.

FREQUENTLY BOUGHT TOGETHER

PRODUCT OVERVIEW

Model # R30310B

Internet # 202216475

This 10-circuit OUTDOOR, 30 Amp manual transfer switch is designed for fast installation in a home, office or small business. It is completely pre-wired and enables the electrical system of the building to accept the power of a portable generator to run up to ten single-pole circuits OR six single-pole circuits and two 20A double pole circuits. It allows you to power electrical appliances, devices and lighting during a power outage. This transfer switch is completely code compliant and keeps the generator power isolated from the utility power at all times. The Heavy-duty, powder-coated steel padlockable enclosure is raintight and will accommodate the generator cord with the cabinet door closed.

  • Two wattmeters to monitor and balance the generator load
  • For use with generators up to 7500 running watts
  • Listed by Underwriters Laboratories Inc.
  • 5-year warranty

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Product Depth (in.) 
Product Height (in.) 
18.5 
Product Width (in.) 
7.5 
Details
Automatic/Manual 
Manual 
Electrical Product Type 
Transfer Switch 
Maximum Amperage (amps) 
30 
Maximum Wattage 
7500 W 
Number of Phases 
Power Distribution Features 
No Additional Features 
Product Weight (lb.) 
20 lb 
Returnable 
90-Day 
Voltage (volts) 
250 
Warranty / Certifications
Certifications and Listings 
1-UL Listed 
Manufacturer Warranty 
5 years 

MORE PRODUCTS WITH THESE FEATURES

Brand: Reliance Controls
Review Rating: 4 & Up
Automatic/Manual: Manual
Maximum Amperage (amps): 30
Number of Phases: 1
Power Distribution Features: No Additional Features
Voltage (volts): 250
Search
12 Questions19 Answers

Customer Questions & Answers

10 Circuit Outdoor Transfer Switch
10 Circuit Outdoor Transfer Switch

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

Do i need to shut off my main breaker in my service panel?

This question is from 10 Circuit Outdoor Transfer Switch
Asked by
Anonymous
New York
February 18, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Rosenberg, Texas.
Read all my Q&A
Home Improvement Profile: DIYer
March 8, 2016
Answer: 
No, you don't shut off my main breaker in service panel when the generator is connected to it and Running.
Only time to shut off main breaker in service panel is when you are wiring/installing the transfer switch.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Cleveland, TX
Read all my Q&A
Home Improvement Profile: DIYer
December 27, 2013
Answer: 
No, neither to install the device nor to use it with a generator when the power is out.
The switches in the panel break the connection with the incoming power feed when switching to generator power. This is not a complete whole-home transfer switch, rather it just powers a few circuits.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

February 18, 2013
Answer: 
No, you do not need to shut off the main breaker in your service panel when you are using your generator with this transfer switch. The transfer switch will keep the utility power and the generator power separated. The nice thing about leaving the main breaker on is that you will know when the utility power is back because the other circuits in your home will turn back on when the power is restored.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

Is it possible to direct wire the cord from the generator into the transfer panel and not use the plug on the panel end?

This question is from 10 Circuit Outdoor Transfer Switch
Asked by
Dennis
Fort Wayne, IN area
September 22, 2012
+1point
1out of 1found this question helpful.
Was this helpful?helpful1unhelpful0

Answers (3)

Asked by
Cleveland, TX
Read all my Q&A
Home Improvement Profile: DIYer
December 27, 2013
Answer: 
Yes, I did exactly this. I simply took the wires off of the back of the plug and attached them using wire nuts to the wiring coming from the generator.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Houston, TX, USA
Read all my Q&A
December 18, 2012
Answer: 
Anything is possible but you would have to mess with the panel wiring and know what you are doing. I wouldnt advise if a novice person in electrical try to attemp.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

September 23, 2012
Answer: 
This is not possible on the outdoor transfer switch without modifying the switch (possibly voiding the warranty). The product is designed so that the cord can be removed and put away when the generator is not in use. The indoor transfer switches are designed so that they can be direct wired to an outdoor inlet box, but the outdoor product has the inlet built in.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
2 answers

How long are the wires that are pre connected to the transfer switch.

This question is from 10 Circuit Outdoor Transfer Switch
Asked by
Manassas, VA
Read all my Q&A
November 10, 2013
My panel is inside my home in my daughters bedroom. So I would like to mount the transfer switch outside the home by the power meter so there isnt another ugly site on the wall in her room. I would like to know how long the prewired leads are on the transfer box to see if they would be able to reach from outside the home to the panel on the inside of that wall.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Cleveland, TX
Read all my Q&A
Home Improvement Profile: DIYer
December 27, 2013
Answer: 
app. 18-24 inches
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

November 11, 2013
Answer: 
The wires extend from the transfer switch 40 to 48 inches. They can be lengthened if the connections are made in a junction box.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Is it made in USA?

This question is from 10 Circuit Outdoor Transfer Switch
Asked by
Rosenberg, Texas
Read all my Q&A
August 7, 2013
Just want to make sure the quality and reliability.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Rosenberg, Greater Houston
Read all my Q&A
September 28, 2013
Answer: 
I would say, assembled in USA.
The quality is good.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 8, 2013
Answer: 
This transfer switch is made in Racine, Wisconsin, USA. We stand behind our products and our excellent technical staff is a phone call away if you have any problems at all.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
2 »
  • 2016-06-25 T15:18:26.604-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202216475, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 106ms
  • QUESTIONS, PRODUCT

CUSTOMER REVIEWS

Rated 4.0 out of 5 by 1 reviewer.
Rated 4.0 out of 5.0 by A good investment for unforeseen catastrophe The power very rarely goes out where I am living: may be one or 2 times a year, for about maximum an hour. The reason for my purchase and installation of this transfer switch was for any unforeseen catastrophe that may happen in the event of a hurricane, when i may lose power and it may take a few days to restore. The wiring and installation was easy. I had made several test runs, and it all worked fine. Technically, it is a good product; but even though it is rated as OUTDOOR TRANSFER SWITCH, the external casing started to rust due to bad painting job, which is a drawback. March 8, 2016
  • 2016-06-25 T18:40:44.226-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_202216475, prod, sort_default
1-1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • REVIEWS, PRODUCT