Rmax Thermasheath 3 - 2 in. x 4 ft. x 8 ft. R-13.1 Polyiso Rigid Foam Insulation Board-613010 - The Home Depot
Discontinued

Rmax Thermasheath

Model # 613010

Internet # 100573703

Store SKU # 416989

3 - 2 in. x 4 ft. x 8 ft. R-13.1 Polyiso Rigid Foam Insulation Board


Rmax Thermasheath 3 - 2 in. x 4 ft. x 8 ft. R-13.1 Polyiso Rigid Foam Insulation Board
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$30.47 / each
Loading...

PRODUCT OVERVIEW

Model # 613010

Internet # 100573703

Store SKU # 416989

R-Matte Plus-3/Thermasheath-3 is rigid foam plastic thermal insulation board composed of environmentally sound, closed cell, polyisocyanurate foam bonded to a durable white-matte (non-glare) aluminum facer and a reflective reinforced aluminum facer. This product is suitable for use in wall sheathing applications in new residential, commercial and agricultural buildings and for thermal retrofit construction to existing buildings. This Energy Star qualified Rmatte Plus-3/Thermasheath-3 provides R13.1 with dimensions of 2 in. x 4 ft. x 8 ft. This product is designed for exterior and interior, non-structural uses.

  • Rmax Polyiso sheathing offers the GREATEST R-value per inch currently available in a rigid foam board.
  • R-Matte plus-3/Thermasheath-3 is applied to the exterior or interior face of wood or metal studs to cover all studs, sills, plates and header constructions, thereby providing insulation over areas not normally covered by insulation products
  • Superior resistance to moisture and vapor in above grade applications.
  • Polyiso ridgid foam board offers superior fire protection properties compared to any other ridgid foam board insulation.
  • Energy Star qualified to meet or exceed federal guidelines for energy efficiency for year-round energy and money savings.
  • When taped and flashed, the Rmax Polyiso board greatly reduces air infiltration and prevents thermal bridging caused by heat and cold tranmission through studs.
  • Lightweight and easily cut to size

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Assembled Depth (in.)  2.0 in  Assembled Height (in.)  96 in 
Assembled Width (in.)  48 in  Product Length (ft.)  8 ft 
Product Thickness (in.)  2 in  Product Width (in.)  48 
Details
Insulation Application Type  2x4 Walls,2x6 Walls,Attics,Basements,Ceilings,Crawlspaces,Exterior Sheathing,Garage,Re-Siding  Insulation Type  Sheathing 
Interior/Exterior  Exterior  Product Weight (lb.)  7 lb 
R Value  13.1  Sheathing Type  ISO 
Structural  No 
Warranty / Certifications
ENERGY STAR Certified  Yes  Warranty Information  Standard Warranty 

CUSTOMER REVIEWS

Rated 4.7 out of 5 by 3 reviewers.
Rated 5.0 out of 5.0 by Good product I insulated a laundry room with the R13 foam board and the job came out great. The cold room is now warm. Much easier than framing and sheetrocking. It is still hard work to move all of the electrical and plumbing, but was made easier using Sharkbite couplings. Not so bad. Homeowners were very pleased with the end result. Material is strong enough to adhere strips of wood for shelving. Tape seems with clear tape. Adhere to wall with large construction adhesive. Much more cost effective over spray on foam. Use hand saw to cut material. Cut outside as there will be thousands of foam particles that will fall off. I will use again. Material is waterproof and is reflective on both sides. A plus. December 24, 2014
Rated 5.0 out of 5.0 by R13 in only 2 in. I purchased this rigid insulation to insulate a cinder block basement wall. The sheets were easy to cut and I achieved R13 in only 2 in. of space as compared to extruded polystyrene, which is only R10, and for the same money. My only disappointment was that I planned to use construction adhesive to install for the short term, but this stuff had a slight bow from the store shelf and the polyiso it is too rigid for the adhesive to adhesive to flatten it out, so I ended up using furring strips and 1/4" x 3-3/4" flathead Tapcons to anchor to the block rather than adhesive, which was my long term plan anyway. Not the products fault, but thought you should know how it behaves. Also, tape the seams with the nashua foil tape and fill any large gaps with great stuff (same polyiso product). January 5, 2015
Rated 4.0 out of 5.0 Good material. Installs easy Installs quite easy. Use extra fine tooth wood saw to cut to size. When picking up material from store INSPECT IT for damage to the corners and sides! The do not pay much attention to the fact that this board is quire fragile and it gets damaged easy if mishandled. REMEMBER YOU PAY $35!!!!! + TAX A PIECE FOR THIS STUFF! January 27, 2015
1-3 of 3

SHIPPING AND DELIVERY OPTIONS

Store Exclusive. This item is available for purchase in select stores only.