Roberts 1-gal. Engineered Wood Glue Adhesive-1407-1 - The Home Depot


Model # 1407-1

Internet # 100582128

Store SKU # 343197

1-gal. Engineered Wood Glue Adhesive

Roberts 1-gal. Engineered Wood Glue Adhesive

This item has been discontinued.
The Home Depot no longer carries this specific product.

$27.98 / each


Model # 1407-1

Internet # 100582128

Store SKU # 343197

Roberts 1407 is an acrylic urethane adhesive designed for the installation of engineered and parquet wood flooring up to 1/2 in. thick and 5 inches wide. Roberts 1407 is a solvent free adhesive and meets the strict requirements of the South Coast Air Quality Management District and may contribute one LEED point for “Low-Emitting Material–Adhesive and Sealant” (IEQ Credit 4.1). Roberts 1407 is protected by GoldGuard , an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesive. Additional 1407 features include the holding of trowel ridge for optimum wood contact, excellent working time, and easy soap and water clean-up.

  • For use with engineered wood planks, parquet flooring and acrylic-impregnated planks up to 1/2 in. thick and 5 in. wide
  • Solvent free, low VOC, environmentally friendly formulation
  • High-solid formula can be cleaned with warm, soapy water when the adhesive is still wet
  • Open time: up to 20 minutes, working time: up to 30 minutes, cure time: 24-48 hours before foot traffic and moving heavy objects
  • Solvent-free, low-odor adhesive is odorless when dry
  • Covers approximately 45-55 sq. ft. per gal. when installing pre-finished engineered wood flooring that is equal to or less than 1/2 in. thick and 5 in. wide when using a 1/4 x 1/4 x 1/4 in. V-notch trowel
  • Covers approximately 70-80 sq. ft. per gal. when installing pre-finished parquet when using a 1/8 x 1/8 x 1/8 in. V-notch trowel
  • Holds trowel ridge for optimum wood contact
  • Rated for heavy-traffic residential and commercial areas

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Container size (qt.)  4.0  Maximum coverage area (sq. ft.)  50 
Adhesive Type  Engineered Wood  Color Family  Beige / Cream 
Commercial / Residential  Commercial / Residential  Dry time (hours)  24 
Floor/wall use  Floor and wall  Flooring Product Type  Engineered Wood Board 
Hazardous Code  No Air  Indoor/Outdoor  Indoor 
Latex based  Yes  Product Weight (lb.)  10.6 lb 
Product type  Adhesive  Returnable  90-Day 
Solvent free  Yes  Use with  Wood 
Water based  Yes 
Warranty / Certifications
Lifetime Warranty  No  Manufacturer Warranty  To be free from manufacturing defects 


Rated 3.4 out of 5 by 14 reviewers.
Rated 1 out of 5 by Don't buy this stuff Great if you have an absolutely perfect condition like a lab. Had to rip up 30sq of Bruce engineered flooring due to cupping and poor curing.. its basically junk and makes a major mess. Home depot professional told me my floor must be wet, how he figured that out without a visit is beyond me, the stain in photo is what was left after we used a heat gun to get the slop off the floor. April 11, 2013
Rated 2 out of 5 by My floors lifted I only bought this because it was a low toxicity adhesive and my wife was pregnant at the time. I really regret my decision to use this as it didn't hold up even 6 months before my floors lifted. This glue is terrible, and now I'm going to have to pull up my new floors and re-install them with a higher quality product. November 12, 2013
Rated 3 out of 5 by Functional We used a gallon of this to finish an engineered flooring install. Compared to the Bostik EFA which we used on the bulk of the floor, this adhesive dries faster, is thinner, and builds up on tools and hands too quickly. It does what it is supposed to do (glues boards) and it spreads a little easier than the EFA, but it is NOT user friendly to work with. It ends up slowing you down. Way too messy! January 2, 2009
Rated 1 out of 5 by Easy clean up and use. The engineered wood has started to move and NOT ADHERE to the surfaces where the product was used. I will need to tear up the work done and find another product that will work as advertised. April 6, 2012
Rated 5 out of 5 by Sticky glue leaves residue but does the job The wood glue worked well and did what it was supposed to do. Clean up is difficult, however. I am still trying to clean spills. I guess it was supposed to have been done within 24 hrs. July 1, 2014
2 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.