Rated 4.3 out of 5 by 10
Rated 4.0 out of 5.0 by dnmann Well worth the money
Having installed numerous rooms of Pergo flooring using regular saws, the cutter was much easier to use. Assembly could have gone better as the instructions were less than helpful. The cutter does what it says it does and the only issue I have is the edge of the cuts. They have a slight angle from 90 degrees due to the cutting edge and some slight chipping but all of that is generally under the wood trim. The speed and lack of trash/sawdust easily justifies the cost. I found that you could keep the cutter in the room you are working on rather then walking back and forth to the saw set up. The time saved is an added bonus.
August 16, 2016
Rated 5.0 out of 5.0 by Frugal A MUST HAVE TO CUT LAMINATE WOOD FLOORING
We used this on our first flooring project with 12mm laminate wood flooring which included the attached foam pad. It is super sharp and makes a clean cut. It saved us so much time not having to run outside to a saw everytime we needed to make a cut. The best part was how clean the whole process was. This was an invaluable tool!
August 2, 2016
Rated 4.0 out of 5.0 by DSBfloors Professional installer tool.
I have used this tool for 4 years and install 1000 to 2000 sq ft of flooring a week. Product is great for laminate. Will cut engineered but dulls blade quickly. I've broken the side bracket twice. Easy repair and parts available online.
April 30, 2016
Rated 4.0 out of 5.0 by Bruceallmighty Great purchase
The only negative issue I have is that the side bar needs another mounting point. I added another fastener to it and that fixed my issue. What a time saver................
December 15, 2015
Rated 4.0 out of 5.0 by frank Good product so far
I have done 2 bedrooms so far with laminate flooring and it is still cutting like the first cut . Very good . I just wonder when it will start becoming dull . I cod not order replacement blade from Home Depot . They do not sell one .
September 1, 2015
Rated 4.0 out of 5.0 by Dave Good unit
Had a hard time aligning the cutting head mechanism to the base. I had to re-drill the four mounting holes(screws would not go in, really!!). This is something a customer should not have to do. But after that the unit functioned well and did the job. I was using it to cut vinyl laminate flooring and it produced nice clean cuts. Base seems a little flimsy but seemed to hold up well to me leaning on it when I reached over the cutter to grab a tool.
June 9, 2015
Rated 5.0 out of 5.0 by Gmoney2428 my best purchase this year
Very easy to use, the firs job went faster and cleaner, I'm very happy whit the results
July 21, 2015
Rated 4.0 out of 5.0 by Mlfx5 So far so good!
I've only completed one job with this cutter. So far so good. Cuts good, easy to assemble and very convenient to use indoors.
February 10, 2015