Free Shipping and BOPIS


Model # 2057-1

Internet # 100144842

Store SKU # 566620

2057 1-gal. Premium Vinyl Tile Adhesive

This item has been discontinued.
The Home Depot no longer carries this specific product.

$13.27 /each




Model # 2057-1

Internet # 100144842

Store SKU # 566620

Use Roberts 128 fl. oz. 2057 Premium Vinyl Tile Adhesive in heavy-traffic residential and commercial areas. The solvent-free formula dries clear and adheres to vinyl composition, vinyl asphalt tile, plywood and concrete subfloors.

  • Adheres to vinyl composition, vinyl asphalt tile, plywood and concrete subfloors
  • For residential and commercial areas with heavy traffic
  • Thin-spread formula dries clear
  • Solvent-free with no calculated volatile organic compounds and can be cleaned with warm, soapy water before the adhesive dries
  • 24-hour dry time
  • Solvent free, zero VOC calculated, environmentally safe formula

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Container size (qt.) 
Maximum coverage area (sq. ft.) 
Product Width (in.) 
Adhesive Type 
Color Family 
Beige / Cream 
Commercial / Residential 
Commercial / Residential 
Dry time (hours) 
Floor/wall use 
Floor and wall 
Flooring Product Type 
Vinyl Tile 
Latex based 
Product Weight (lb.) 
7.9 lb 
Product type 
Solvent free 
Use with 
Water based 
Warranty / Certifications
Lifetime Warranty 
Manufacturer Warranty 
To be free from manufacturing defects 


Rated 4.1 out of 5 by 20 reviewers.
Rated 5.0 out of 5.0 by Very Easy to Use The principle of this product is simple. Apply it to a clean level surface, allow it to dry (become tacky to the touch), and begin installing your tile; it truly is that simple. If you rush the installation of tile by not allowing the adhesive to properly dry (become tacky to the touch without the transfer of wet adhesive to your fingers) your tile will not adhere properly, and the installation will be messy. I had to use this adhesive on self-adhesive (peel and stick) tile because the peel and stick simply would not adhere entirely and firmly to the floor. Yes, I cleaned, leveled, and prepped the floor with a bond enhancer/primer as recommended by the tile manufacturer (IT DID NOT WORK). Often, self-adhesive tiles simply do not have sufficient bonding capabilities on concrete floors. Being a contractor, I knew the vinyl tile adhesive would work well and enhance the bond of the peel and stick. For this project I installed 680 18”x18” Stainmaster self-adhesive vinyl tiles, spaced 1/8” to receive vinyl tile grout, using the tile adhesive. The entire bonding surface of every tile is fully and completely adhered to the floor (including those areas which were not 100% level). This product works exceptionally well when used properly, and it is very easy to use; no mixing required. Simply open the container, apply thinly and evenly to floor with a "v" notch vinyl floor tile trowel, allow it to dry before beginning tile installation. February 25, 2014
Rated 5.0 out of 5.0 by Extreme tackiness!!! This tile glue is awesome! The only drawback is my clutsy behind stepped and sat in it a couple times and was glued to the floor! I used paint thinner(mineral spirits) to remove it from other tiles, my shoes and I threw away the shorts I wore! It comes off of your skin easily with a wet washcloth and pumice cleaner. We used it in a wet, humid, dirty, hairy pet grooming salon. I will update about durability after a few months of use. The directions say that the tile can be moved easily but that was NOT our experience. Once the tile was down, there was NO moving it or replacing it. July 16, 2014
Rated 4.0 out of 5.0 by GOOD Purchase today Thought I love , but I like it ... I am sinclair I am laying tile floor to a kitchen ... I dont use a trowel I use my hand My fingers get places a trowel can't.. IT IS VERY VERY STICKY !!!! It is yellow dries beige.. But don't touch it .... I love the PRO BETTER its like cement .... July 13, 2015
Rated 5.0 out of 5.0 by great product goes down quick just used a paint roller was so easy put a fan on it and was laying tile in half an hour. August 19, 2013
Rated 4.0 out of 5.0 by Did the job. I needed this to relay peel 'n' press tile laid onto concrete floor by the previous owner. I used way too much on the first few pieces of tile, so had adhesive oozing out for a couple of days. Used less on the remaining floor (about 30 sq.). Way less oozing out. Need to clean with mineral spirits. Used several weeks ago and happy with results thus far. March 25, 2014
Rated 4.0 out of 5.0 by Nice and Quick I have been flooring for years!! One thing I hate is waiting for the glue to set for V.C.T tile, This stuff says a while but it was good and tacky in about an hour. Great product doing V.C.T just got a little better. April 4, 2009
Rated 5.0 out of 5.0 by just read the review by "Extreme Tackiness!!" I'm rolling on the floor!! Yes, it's a great's so good, it can ruin your day! January 19, 2015
Rated 4.0 out of 5.0 by Robert's Premium Vinyl Tile Adhesive is a good product I used the Robert's Premium Vinyl Tile Adhesive to lay down self-stick vinyl tile to OSB in my barn office. It worked great and was easy to use. March 14, 2012
  • 2015-10-03T12:06:34.269-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_20, tr_20
  • loc_en_US, sid_100144842, prod, sort_default
2 >>