Rated 4 out of 5Â by 18
Rated 5 out of 5Â by dcredwingfan Very Easy to Use
The principle of this product is simple. Apply it to a clean level surface, allow it to dry (become tacky to the touch), and begin installing your tile; it truly is that simple. If you rush the installation of tile by not allowing the adhesive to properly dry (become tacky to the touch without the transfer of wet adhesive to your fingers) your tile will not adhere properly, and the installation will be messy. I had to use this adhesive on self-adhesive (peel and stick) tile because the peel and stick simply would not adhere entirely and firmly to the floor. Yes, I cleaned, leveled, and prepped the floor with a bond enhancer/primer as recommended by the tile manufacturer (IT DID NOT WORK). Often, self-adhesive tiles simply do not have sufficient bonding capabilities on concrete floors. Being a contractor, I knew the vinyl tile adhesive would work well and enhance the bond of the peel and stick. For this project I installed 680 18âx18â Stainmaster self-adhesive vinyl tiles, spaced 1/8â to receive vinyl tile grout, using the tile adhesive. The entire bonding surface of every tile is fully and completely adhered to the floor (including those areas which were not 100% level). This product works exceptionally well when used properly, and it is very easy to use; no mixing required. Simply open the container, apply thinly and evenly to floor with a "v" notch vinyl floor tile trowel, allow it to dry before beginning tile installation.
February 25, 2014
Rated 5 out of 5Â by dogpaula Extreme tackiness!!!
This tile glue is awesome! The only drawback is my clutsy behind stepped and sat in it a couple times and was glued to the floor! I used paint thinner(mineral spirits) to remove it from other tiles, my shoes and I threw away the shorts I wore! It comes off of your skin easily with a wet washcloth and pumice cleaner. We used it in a wet, humid, dirty, hairy pet grooming salon. I will update about durability after a few months of use. The directions say that the tile can be moved easily but that was NOT our experience. Once the tile was down, there was NO moving it or replacing it.
July 16, 2014
Rated 4 out of 5Â by lovetoshop Works great
I used this for my vinyl tile. It is very very messy. It works great. but I got tired of messing with the glue for every room and started using a staple gun. :)
September 30, 2014
Rated 4 out of 5Â by Paulie Did the job.
I needed this to relay peel 'n' press tile laid onto concrete floor by the previous owner. I used way too much on the first few pieces of tile, so had adhesive oozing out for a couple of days. Used less on the remaining floor (about 30 sq.). Way less oozing out. Need to clean with mineral spirits.
Used several weeks ago and happy with results thus far.
March 25, 2014
Rated 4 out of 5Â by Will I will use this again
Very easy to put down and has done a great job so far with keeping the vinyl squares down and it was done in a fairly cold environment 20's and i was very pleased with the result
February 11, 2014