Model # 2077-1

Internet #202647014

Roberts 2077 1-gal. Superior, Pressure Sensitive Carpet Tile Adhesive-DISCONTINUED

Discontinued Roberts

2077 1-gal. Superior, Pressure Sensitive Carpet Tile Adhesive-DISCONTINUED

Frequently Bought Together

Product Overview

Roberts 2077 pressure sensitive carpet tile adhesive has superior performance. This adhesive was developed for the installation of vinyl backed carpet tile and high density cushions used in double glue down applications. It is highly plasticizer migration resistant and may be used as a releasable or permanent bond adhesive. Roberts 2077 is a solvent free, VOC compliant adhesive and meets the strict requirements of the South Coast Air Quality Management District and may contribute one LEED point for “low-emitting material-adhesive and sealant” (IEU credit 4.1) and “low-emitting materials-flooring systems” (IEU credit 4.3). Roberts 2077 is also protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesive.

California residents: see   Proposition 65 information

  • Recommended for installing vinyl backed carpet tile
  • Environmentally friendly acrylic formulation with GoldGuard antimicrobial system to inhibit mold and mildew
  • Releasable or permanent bond
  • Open time 30 minutes, working time 60 minutes and 24 to 48 hour drying time before traffic and moving heavy objects
  • Solvent free, VOC compliant formula that can qualify for Leed points
  • Covers approximately 225 sq. ft. per gal. with roller application
  • Covers approximately 180 sq. ft. per gal. using a 1/16 in. x 1/16 in. x 1/16 in. square notch trowel

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Can I use this product for vinyl flooring over concrete?

I am going to install vinyl sheet flooring on concrete. Can I use this product as adhesive? This is an indoor installation. Thanks
Asked by: sammmyr
Hi Sammy, the product you're asking about is not for vinyl flooring. It's for carpet. Take a look at Roberts model 2001, it's for felt backed vinyl flooring and can be used on concrete. HD SKU #696-397.
Answered by: Anonymous
Date published: 2015-11-07

Will your 2077 superior grade adhesive hold light weight acoustic carpet on the ceiling of my motor home?

The original foam backed vinyl came loose due to defective foam backing (only 8 years old) I have scraped the old foam residue off the ceiling and sanded the plywood surface clean. A am prepared to support the carpet with plywood forms until dry, if necessary.
Asked by: Anonymous
Thank you Iwa for your inquiry. Our 2077 adhesive has not been tested with this material or in this situation. Therefore, we cannot not recommend that you use this adhesive for your install. Thank you for your interest in our product.
Answered by: RobertsSupport
Date published: 2015-09-17

Spread rate

what is the spread rate for this adheasive???
Asked by: Anonymous
Thank you for your inquiry regarding our 2077-1 adhesive. If you are installing carpet tile using a square notch trowel, 1/16" x 1/16" x 1/16", coverage is approximately 170-190 sq. ft. per gallon. If installing carpet tile using a medium nap roller coverage is up to 225 sq. ft. per gallon. If installing textured back carpet tile with a 'U' notched trowel, 1/16" x 1/16" x 3/32", coverage is approximately 160-180 sq. ft. per gallon. The trowel notches referenced are those typically recommended for the type of flooring being installed. They are normally the minimum size recommended. Surface conditions (roughness and porosity of substrate), type of flooring and backing will ultimately determine the required trowel notch size and coverage. Flooring manufacturer’s products differ in characteristics and textures. Always check with the specific flooring manufacturer’s recommendations for their specific trowel requirements. Less porous substrates typically require a smaller notched trowel and longer open time than porous substrates. Ensure 100% transfer of adhesive to the substrate and the flooring backing. If you have any further questions you may call our Customer Service (866) 435-8665. Thank you for your interest in our product.
Answered by: RobertsSupport
Date published: 2015-09-17

Do I have to remove the old glue? Several are loose and need to be reglued.

Asked by: Anonymous
Pat- Yes, for the 2077 Superior Grade Pressure Sensitive Carpet Tile Adhesive, and all adhesives you must remove the old adhesive or glue and have a clean substrate to lay the new adhesive or glue. I hope this helps, should you have any further questions please contact our Roberts Customer Service at (866) 435-8665. Thank you for choosing Roberts!
Answered by: RobertsSupport
Date published: 2015-09-17
  • y_2017, m_2, d_25, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_, sid_202647014, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 135ms

Customer Reviews

2077 1-gal. Superior, Pressure Sensitive Carpet Tile Adhesive-DISCONTINUED is rated 3.3 out of 5 by 4.
Rated 4 out of 5 by from Solid Product, Easy to Use Like this pressure sensitive adhesive for carpet tile. Ran out of carpet tile, then installed 2 weeks later when the new order came in, still worked really well for adherence. Smell is not bad and only brief while drying. Coverage is super easy, changes color when ready, so easy for novices or pros. Only issue is we had a troublesome area that we had to change tiles a few times and the adhesive lost its tackiness, so had to place more, wait for an hour, then finish the job in that small area. So probably good for 2 placements, anymore loses adhesion. So have a plan before using was the lesson we learned. Very minimal carpet tile lift after install, better than expected.
Date published: 2013-06-25
Rated 5 out of 5 by from Wonderful Product Used this glue to glue down carpet tiles in a basement on cement. Used a roller method to apply then put the tiles down. Worked great! No problems with readjusting tiles. Waited 48hrs to put anything on the tiles. Clean up was easy. Hot water and soap on everything. Highly recommend this product again. I have more to carpet and plan to buy more!
Date published: 2013-12-10
Rated 3 out of 5 by from It was easy to apply, however, was expecting that it would be a lot more tackier. Glue was easy to apply, but not all that tackey. Have used other product that was very tackey after it had dried properly. Just wanted to try a different product. Not saying that it may not work as well, but will not know that unless I get called back, by my customer, saying that the carpet is not staying put. Has been two weeks since the carpet was applied.
Date published: 2014-01-07
Rated 1 out of 5 by from Horrible Didn't even get to use it, such a disappointment .
Date published: 2014-07-29
  • y_2017, m_2, d_25, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_, sid_202647014, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 91ms