Rated 3.9 out of 5 by 87
Rated 4.0 out of 5.0 by GVMarilyn Great kit
Had to do a bit of fiddling to get this to fit our cabinet (had to add some 1x2's to the side of the cabinet) but this was no different from the roll-out that was installed when cabinet was built. I used this as an upper shelf in a large cabinet that had a lot of empty air-space and was pretty much wasted otherwise. By adding this shelf I was able to move most of my pots into this cabinet making them much more handy for cooking. Installation took my non-carpenter husband about 3 hours not counting the trip to the store to get the 1x2's. Only one trip to a store my husband always considers this a mark of success and ease! LOL
May 24, 2016
Rated 5.0 out of 5.0 by toolman Easy
Installation was a snap. I wish all projects were this simple.
June 14, 2016
Rated 2.0 out of 5.0 by solimar Did not meet expectations
Assembled and installed the drawer in the cabinet per the instructions. Screwed the brackets to the rear of the cabinet and slid the drawer in its place.
When I pulled the drawer out, the front tracks spread out as there's nothing supporting them to prevent them from doing so. In order to remedy the situation, I'm going to place a wood block on both sides to keep the tracks in place and to prevent any side movement.
Other than that, I find it to be a good value and aside from the fore-mentioned, it should serve the purpose intended.
April 26, 2016
Rated 4.0 out of 5.0 by John As promised but still work
The product was as advertised but still a lot of work. There were no assembly directions for the shelf, just the slides, but that was not a big deal. The work entailed was the measuring and accurate cutting to fit that this kind of a product entails. Not much to do about that but to plan ahead.
The slides were of the budget type that do not allow the shelf to be pulled all the way out. I tossed those and got some good ball bearing slides with soft closers when I went back to the store.
I would buy these again if I need them.
March 22, 2016
Rated 5.0 out of 5.0 by Ced Sliding Drawer
Easy install and able to trim down to fit in cabinets.
April 12, 2016
Rated 5.0 out of 5.0 by Seasaw45 East solution to a tricky problem
The pieces and hardware were easy to fit together and the directions were easy to follow, overall a good solution to an odd size cabinet.
March 12, 2016
Rated 4.0 out of 5.0 by brouv Very good shelf but need to have the proper tools
I bought 4 of those shelf to put in my kitchen.
I was happy with the packaging. I was expecting 4 boxed but everything arrived in one big box. Looks like it was packed for our order. No damage to the product.
Read the instruction and I started on the first drawer.
No problem for the measurement and to size. Easy with a table saw and a mitter saw.
I glued the 4 frame pieces and the bottom to the frame. I then predrilled the screw holes and I also counter sink them (not mentioned in the instruction but it's needed because I wanted the rail to be flush with the drawer).
I attached the rail to the inside of my cabinet using the spacers since my doors were in the way and here is the first glitch I encounter. I don't know where the 1in gap that you are suppose to substract is coming from but I need to remove more than 1 in. Instead of recutting the drawing, I made a smaller spacer using a wooden rod 1 in cut to size. No problem to put the first one.
For the second one, I deducted 1-1/8 in and it worked perfectly.
My wife likes them
You need to be a little crafty to do those and have some tools.
March 7, 2016
Rated 5.0 out of 5.0 by Dee love them, they work great
I thought the wood was good quality. I washed it instead of paint and it worked well. They were easy to assembly and install. I am very happy with how they rolled in out out easily.
March 1, 2016