Model # CLRX4-CLWT

Internet #202672931

RowlCrown Classic 8 ft. x 4-5/8 in. x 1/8 in. PVC Room-in-a-Box Crown Molding / Wire Raceway


Classic 8 ft. x 4-5/8 in. x 1/8 in. PVC Room-in-a-Box Crown Molding / Wire Raceway

$228.23 /each

Frequently Bought Together

Product Overview

Value engineered dual purpose crown molding and wire management system. 4 in. Classic-style complete crown molding system for 16 ft. x 16 ft. room. White PVC crown molding/ wire management system, includes: 8x CLST4-CLWT-08, 4x IC4-CLWT, 4x CT4-CLWT.

California residents: see   Proposition 65 information

  • Lightweight and easy installation
  • Pre-finished, nail hole free, requires no or minimal caulk
  • Create dramatic up-lighting effects with dropped installation
  • Paintable
  • Uv protected - will not fade or blotch
  • Resists thermal expansion, shrinkage, mold and mildew
  • Self-extinguishing

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Will this let light through for rope lighting?

I found this product while searching for recessed crown molding lighting.
Asked by: Dennis
yes you can use rope light. install the the molding a few inches down from the ceiling and install your rope light above that
Answered by: dndthatsme
Date published: 2016-06-15

Is the price really $199.00 for (1) 8' section of molding?

The description says "room in a box" but one 8' section will not do a whole room and the price seems like a lot for one 8' section.
Asked by: Paul
the description says it is enough to do a 16x16 room - should be 64 linear feet of molding
Answered by: Dennis
Date published: 2016-03-08

Odd Sized Room

I have a room that is 19' x 12', so I need two extra center connectors. Is there an option to buy extra pieces?
Asked by: Wayne
There are extra connectors on the website.
Answered by: CommunityAnswer
Date published: 2016-04-03

Do the corner pieces provided allow you to go down a hallwall reverse corner. See picture

Asked by: Rick
The set includes a 8x CLST4-CLWT-08, 4x IC4-CLWT, 4x CT4-CLWT.
Answered by: CommunityAnswer
Date published: 2016-05-25
  • y_2017, m_3, d_20, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_, sid_202672931, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 115ms

Customer Reviews

Classic 8 ft. x 4-5/8 in. x 1/8 in. PVC Room-in-a-Box Crown Molding / Wire Raceway is rated 4.0 out of 5 by 9.
Rated 5 out of 5 by from Easy Set-up For someone who has "two left hands", like myself, the Room-in-a-Box set-up was simple & fast. I used it for my surround sound wiring. The real bonus was that I needed access to the wiring a few times after I installed it and it was easy to both remove and put back together. Highly recommended!
Date published: 2011-09-07
Rated 5 out of 5 by from Just finished my second room! Started with the dining room and room in a box worked perfectly, very user friendly and looks great. Second room was the den/living room, used the splices to make a seamless look. Home Depot matched the paint color, all seams are hidden flawlessly, looks great thank you!! Great product!
Date published: 2011-09-06
Rated 5 out of 5 by from Amazing product! With Hurricane Irene we got water damage everywhere (basement, ceilings, molding, walls) I looked everywhere for a products that look classy, reasonably priced, and durable so if have another misfortune we won't have to go through the same repairs again. This product is extremely easy to install, looks and is more versatile than conventional molding. Best of all, in our high humidity rooms (basement) if it ever gets wet,dirty, or moldy, just wipe it down instead of repainting it! The company's customer service rep was extremely helpful in answering all of my questions before I started, and even gave me decorative ideas to install this in the bathrooms with track lighting. Everyone has complemented me on how it looks. Truely an awesome product.
Date published: 2011-10-02
Rated 1 out of 5 by from Poorly tested design The outside profile is extremely difficult to attach to the back profile. Even with two other people's assistance, it keeps popping out. Instructions and Youtube videos did not help. Makes me wonder if the manufacturer tested this using installers or even listened to their feedbacks. The Keystones ( couplers) do not attach to the outside profile with PVC cement, CA glue or any sort of glue. If you use doublesided tape, it will come out after a while because of heat and weather. We even tried degreasing the adhering ends with acetone cleaner. No luck! Do yourself a favor - get the traditional crown molding and install it. If you want to run wires use some other means. This is highly likely to become a painful or failed project.
Date published: 2016-08-03
Rated 5 out of 5 by from Great product for those of us who are challenged in trying to put up crown molding. The product was easy to use and install. My only issue is that I wish their instructions were better. When installing the base section, they should have a clearer picture on which direction the wall section should face. I didn't realize until after I had all of the base sections cut and screwed to the ceiling that I had installed it backwards. This was very frustrating because I had to remove all of the sections and pray that I didn't snap the base at the crease since I had to now bend it 180 degrees in the other direction. So what I wound up doing was to first flatten the piece out, put clear packing tape on both sides of the crease, let stand overnight and then bend the base 90 degrees in the other direction. I held my breath because I wasn't looking forward to purchase eight more base pieces if they cracked. I would think that since this product has been around a number of years that they would have better installation pictures. Anyway, still loved the product.
Date published: 2014-04-24
Rated 5 out of 5 by from Excellent Kit I was skeptical at first if a plastic crown molding would look good in a dinning room. It came out perfect. The instructions are very hard to follow. You really need to spend time thinking about how it will go up. Once you figure it out, it goes up 1-2-3. Caulking also worked well as small gaps because of the imperfections in the walls and plaster covered easily. Overall very happy with this product.
Date published: 2014-11-27
Rated 1 out of 5 by from very difficult to install Instructions are difficult to understand. I had to try and find a youtube video that did help. Installing the outside edge was VERY difficult.
Date published: 2016-01-18
Rated 4 out of 5 by from Met my expectations, however.... This product is probably excellent for indoor use on drywall. My installation was outdoor, on stucco, in a patio area. The instructions need more information, or at least some hints. For example, when the back support is installed, it tend to bend away from the wall when the front piece is installed. On drywall this would simply be fixed by installing additional screws/nails along the bottom edge, however in stucco that was not that easy, as there was steel reinforcement in this location. I was able to get a very nice installation after making adjustments to their installation instructions. Also, the inside corner pieces are designed with additional flanges to compensate for corners that maybe more than 90 degrees. I do not recall seeing any mention of this in the instructions, and had half of these installed before I noticed the flanges. If you have good square corners, these MUST BE REMOVED or the corners go in off vertical, making it difficult to get a good match when you cut the front piece to length. Cutting the front material can be difficult. You will need to experiment with a procedure to get a good square cut THAT IS SMOOTH. The overall project took muck longer than expected, but I believe this was due to the installation over stucco. I really like the final look and the ability to hide the wires for the indirect lighting is great.
Date published: 2015-07-21
  • y_2017, m_3, d_20, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_, sid_202672931, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 19ms