Model # FG4C7506ZINC

Internet #100308343

Store SKU #329571

Rubbermaid Zinc Twin Track Universal Hardware Pack


Zinc Twin Track Universal Hardware Pack

$2.58 /each

Frequently Bought Together

Product Overview

If you're looking to organize your home, this Twin Track Universal Hardware Pack will help set you on your way. The pack includes all the hardware you need to install 2 Twin Track uprights and 3 multi-purpose shelves.

  • Used to install two 47-1/2 in. twin track uprights and 3 multi-purpose shelves (sold separately)
  • Compatible with twin track shelving system
  • All metal construction for durability
  • Adjustable shelving heights to accommodate your individual shelving needs



Warranty / Certifications

More Products With These Features


Customer Questions & Answers

How do you remove the anchors later on without letting them just fall into the wall or damaging the wall?

Asked by: chang
Just unscrew the screw. If you attached a bracket or brace with the screw, remove the screw, then remove whatever you attached with the screw, then place the screw in the hole and push the screw in the wall to straighten or open the anchor. You also could use the black pin. Then you should be able to remove/pull out the anchor without further damaging the wall.
Answered by: Buzz
Date published: 2016-11-08

what size head are these screws in the twin track pack?

Asked by: dms
Answered by: Buzz
Date published: 2016-10-30

How long are the wall screws

How long are the six wall screws in this packet? They don't look very long.
Asked by: PleasedCustomer
There are 6 2" Phillips Flat Head Screws and 6 1.25" Phillips Flat Head Screws in this packet.
Answered by: Rubbermaid
Date published: 2016-07-04

How many of these do i need??

I am getting five 70 in twin tracks, six 12 x 36 shelves, and six 8 x 24 in shelves. And what are the plastic pieces for?
Asked by: Anonymous
The Rubbermaid Twin Track Hardware Pack 4C75 contains 6 screws for the uprights and enough sets of bracket screws for 4 brackets. According to the assembly instructions: You need 7 screws for each 70" upright. For the 36" shelves, you need 3 brackets per shelf. For the 24" shelves, you need 2 brackets per shelf.
Answered by: Rubbermaid
Date published: 2016-06-15
  • y_2017, m_2, d_19, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_, sid_100308343, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms

Customer Reviews

Zinc Twin Track Universal Hardware Pack is rated 3.5 out of 5 by 15.
Rated 5 out of 5 by from Easy installation. I picked up the track, brackets and shelves. After marking where I wanted the track, temporarily screwing it to the wall, so I could mark all the faster locations. I easily install it by my self in less than an hour. Great product.
Date published: 2016-10-10
Rated 4 out of 5 by from great product, horrible instructions So the picture for the hardware really doesn't explain what to do. You need to bend the anchor in on itself to form that point. I used a 7/32 drill bit to make the hole. Then worked the folded point of the anchor in a little by hand and hammered it in the rest of the way (you want it to be tight). You then proke the black piece into the hole to open up the anchor. You might need to hammer that a bit too but mostly i was able to push it in and hear the anchor pop open. Then just screw in the metal piece. Very easy once you figure it out! Why they couldn't tell you this somewhere i have no idea! !
Date published: 2015-03-20
Rated 5 out of 5 by from Strong and Reliable I use this dual track system for shelving my books. I secure the rails with 2.25" masonry screws into my cinder block walls, spacing them 14-15" apart. I chose 12" deep shelves to accommodate my 3-ring binders. Otherwise, the 10" deep shelves would do for most books if you don't mind the widest ones sticking out a little. The cinder blocks will give before the shelving will. This system uses wall space better than free-standing bookcases. If I ever want to move the shelves, they'd also take up less space than a bookcase. I highly recommend Rubbermaid's dual track shelving systems for heavy storage (like books). Like my wife, they're strong and reliable.
Date published: 2008-07-22
Rated 4 out of 5 by from great hardware - infuriating labeling We love these metal shelving standards and brackets. They're terrific. But as for the shelves themselves, we will NEVER buy the Rubbermaid brand again. The shelves are labeled using an adhesive that extremely frustrating. Try using a razor blade or a scraper to get the label off and you'll likely damage the delicate surface. We have yet to have a label come off in one piece on the many shelves we now greatly regret purchasing. Getting them off is a needlessly time-consuming and maddening process. Come on Rubbermaid! We've purchased many plastic products (Sterlite, Hefty) where the labels are thicker and the adhesive properly formulated so they peal off with ease!
Date published: 2013-07-06
Rated 3 out of 5 by from Label Adhesive is ridiculoous The amount of time and effort it takes to remove the labels is ridiculous. Even using the recommended heat/talc method recommended, it took an inordinate amount of time and effort. You need to do better.
Date published: 2013-11-15
Rated 5 out of 5 by from Very good product I don't get all of the whining about the lack of instructions. I'm not the most handy of people, but it's easy to figure out. It's easy to find brackets with holes in them to anchor the shelves to the brackets. The brackets hold a good bit of weight. I put both my kids (ages 8 & 4) on the shelf to make sure it would hold.
Date published: 2016-01-31
Rated 2 out of 5 by from disappointed in the quality the shelving came damaged and the label is stuck on so you cannot peel it off: RIDICULOUS for a quality company to be using such an impossible adhesive. Not at all what we expected from Rubbermaid.
Date published: 2013-09-10
Rated 3 out of 5 by from Not Easy To Install The tracks were easy enough to install AFTER I bought some good drywall anchors that I could screw into the wall. The shelves are nice, and I was able to get the sticker off easily enough. However, the big problem I had was using the screws that are suppose to secure the bracket to the shelf. Both the long and short screw barely went into the shelf, and immediately came off. Right now we have the shelves just lying on the brackets until we figure out a way to permanently attache them.
Date published: 2014-01-09
  • y_2017, m_2, d_20, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_, sid_100308343, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms