Rated 4.3 out of 5Â by 12
Rated 5 out of 5Â by alice Looks great. Was easy to apply.
I would recommend Rustoleum 1-Part Epoxy Concrete Floor Paint. It was easy to apply, didn't have a strong odor, and dried quickly. I put a table on it after two days, and when I dragged the table, it did scuff, however, a week or two later, I dragged the table far to the other end of the garage, and it made no marks at all. I used two coats, because I liked the richer color it made, and one coat didn't cover some white paint spills and tire marks i didn't bother sanding off. I did not use an acid wash. I just used simple green and water and then rinsed with water to make sure there was no residue. It looks great. Great price.
October 15, 2013
Rated 4 out of 5Â by Handymanwannabe Easy to apply but don't believe everything you read
I used this product on my basement floor to replace a Behr epoxy that didn't stick. This product had much better adhesion but it takes a long time to dry. Give it five days between first and second coats, and three days after second coat before putting anything on it. I used a fan to speed up the drying and it seemed to help.
November 16, 2011
Rated 5 out of 5Â by azshowers Great for my needs
I have a small work room off of my garage that will see foot traffic only. The product was easy to work with and looks nice with a satin sheen.
The color is Battleship Gray, and is cool in an industrial kind of way.
For a garage floor I would step up to one of the solvent, high solids products to avoid hot tire pickup etc.
I needed to lay down two coats using a 1/2 inch knap roller for 100% coverage on the concrete.
So far, I'm pleased with the product.
August 31, 2011
Rated 5 out of 5Â by bc1980 stained concrete
garage floor was stained with oil , dirt and piant . epoxy worked great and still working . had to put it on thick . so took alittle more than recommend
September 10, 2010
Rated 5 out of 5Â by jefflac GOOD STUFF
Used this on basement floor & did 2 coats . Excellent coverage with Battleship Grey color. Specs. were right on
in re: to sq. ft. coverage & dry time. Just vacumed & washed floor with det. , let dry , then painted 2 coats
waiting 24 hours before putting on second coat. Did
not etch as floor had no grease or oil, just dirt. Also only
foot traffic would be on finished floor.Looks great & stuck
to cement well. Time will be the true test!
June 17, 2013