Model # 203842

Internet #202588474

Rust-Oleum Epoxy Shield Garage 1-gal. Gloss Floor Coating Kit-DISCONTINUED

Discontinued Rust-Oleum

Epoxy Shield Garage 1-gal. Gloss Floor Coating Kit-DISCONTINUED

store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

The Rust-Oleum 1-Gallon Gloss 2-Part Epoxy Garage-Floor Coating Kit is designed to create a showroom-quality surface for your interior garage floor. The durable, water-based formula offers optimal adhesion and dries to a beautiful finish that protects against gasoline, antifreeze, motor oil, salt and hot-tire pickup.

California residents: see   Proposition 65 information

  • Suitable for your concrete garage floor
  • Water-based, 2-part epoxy formula provides excellent adhesion
  • Provides maximum adhesion, durability and protection
  • 1 container covers up to 250 sq. ft.
  • High-performance coating resists stains, abrasions and chemicals
  • Easy-to-clean finish for your convenience
  • Actual paint colors may vary from on-screen and printer representations
  • Online Price includes Paint Care fee in the following states: CA, CO, CT, MN, OR, RI, VT



Container Size
1 GA-Gallon
Coverage Area (sq. ft.)


Application Method
Color Family
Browns / Tans
Dry to touch (min.)
Number of components in formula
Paint/Stain Base Material
Epoxy/2 part
Paint/Stain Clean Up
Soap & Water
Paint/Stain Key Features
Chemical Resistant,Prevents hot tire pickup,Sealer
Paint/Stain/Waterproofer Product Type
Basement, Floor & Garage
Substrate/Surface Use Type
Time before recoating (hours)

Warranty / Certifications

Manufacturer Warranty
Satisfaction Guarantee

More Products With These Features


Customer Questions & Answers

is it ok to put floor wax on this coating, it's over a year old

Asked by: Anonymous
Hello papa d! Wax is one of those materials that adds appeal immediately after application. However, when you apply wax over painted, stained, or clear coated surfaces, you create a layer that is difficult to paint over the next time the coating needs to be repaired. On clear coats, wax embeds into the surface and causes the clear coat to "yellow" ... diminishing the beauty as well as shortening the life of the coating. I would recommend mopping with a simple cleaner like Murphy's Oil and hot water. If the cleaner is labeled, "Safe for Hardwoods," then it is likely safe for your painted surfaces as well.
Answered by: PatInPaint
Date published: 2015-11-07

should i put down a bonding coat first,and should any etching be done ?

Asked by: Anonymous
Hello Butch, The EpoxyShield kit contains a DVD that demos the entire install. The one-car garage kit also contains a citric acid etcher, a quart of catalyst, a gallon of base, and the speckles that are added to improve appearance as well as traction. If your floor has an existing sealer or paint, you'll have to remove the old surface before etching. There are also two-car garage kits and a high-gloss clear coat kits sold in The Paint Department at The Home Depot. MY SUGGESTION: View the DVD twice before beginning the project.
Answered by: PatInPaint
Date published: 2015-11-07

Is there a minimum curing temperature? I would like to use this on my garage floor, but it's starting to get cold at night.

Asked by: Anonymous
Apply only when air, material, and surface temperatures are between 60-85°F (15-29°C) and the surface temperature is at least 5°F (3°C) above the dew point. The relative humidity should not be greater than 85%.
Answered by: Rust-OleumSupport
Date published: 2015-09-17

have painted garage floor w/color chips, now want add 1 more coatepoxyshield do i have to add more color chips ?

Asked by: Anonymous
Alberto, You can go over the current floor coating within 16 to 48 hours; after you will need to make sure the floor is clean and dry and scuff it with 60 grit sandpaper. If you like the look that the decorative color chips provide, you will need to add them over the newly applied coating since the new coating will cover the existing chips.
Answered by: Rust-OleumSupport
Date published: 2015-09-17
  • y_2017, m_8, d_17, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_202588474, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 155ms

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 133ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;