Rust-Oleum Epoxy Shield Professional Semi-gloss Tile Red Floor Coating Kit-DISCONTINUED-203848 - The Home Depot
Discontinued

Rust-Oleum

Model # 203848

Internet # 202588486

Epoxy Shield Professional Semi-gloss Tile Red Floor Coating Kit-DISCONTINUED


Rust-Oleum Epoxy Shield Professional Semi-gloss Tile Red Floor Coating Kit-DISCONTINUED
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$99.97 / each
Loading...

PRODUCT OVERVIEW

Model # 203848

Internet # 202588486

Rust-Oleum Epoxy Shield Professional Floor Coating strengthens and protects shops and other commercial concrete surfaces. Apply for excellent wear, impact and abrasion resistance to heavy foot and vehicle traffic. Kit includes 2-part solvent-based epoxy coating, decorative color chips and detailed instructions.

  • Great for floors with heavy traffic for the wear and tare
  • Oil-based, 2-part epoxy formula provides excellent adhesion
  • Provides maximum adhesion, durability and protection
  • Easy to use formula covers up to 400 sq ft.
  • Subject to or will include a recycling fee in the following sates: CA, OR, CT
  • High-performance coating resists stains, abrasions and chemicals
  • Easy-to-clean finish for your convenience
  • Actual paint colors may vary from on-screen and printer representations

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Assembled Depth (in.)  8.125 in  Assembled Height (in.)  8.125 in 
Assembled Width (in.)  13.25 in  Container Size  1 GA-Gallon 
Coverage Area (sq. ft.)  250 
Details
1-part, 2-part or 3-part formula  2-part  Application Method  Roll On 
Chemical resistant  No  Cleanup  Soap & Water 
Color Family  Reds / Pinks  Color/Finish  Tile Red 
Dry to touch (min.)  960  Exterior use  No 
Hazardous Code  No Air  Interior Paint & Stains Product Type  Concrete/Basement/Garage Floor Coating 
Interior/Exterior  Interior  Paint Product Type  Interior Paint/Stain 
Prevents hot tire pickup  No  Primer required  No 
Returnable  90-Day  Sealer  Yes 
Skid Resistant  No  Surface use  Concrete 
Time before recoating (hours)  16  Type  Epoxy 
Waterproofer  No 
Warranty / Certifications
Manufacturer Warranty  Satisfaction Guaranteed 

CUSTOMER REVIEWS

Rated 5 out of 5 by 3 reviewers.
Rated 5 out of 5 by Nice Floor worth the work I just finished my floor this weekend and first off I want to say, order the Epoxy Shield 1 gal. Premium Clear Coating Kit when you order this product. It will pay off in the end. I have a 4 car garage and it took three kits of the professional (6gal) and 3 kits of the premium (3gal) (1100sq Feet). I have read a lot of reviews from many different sites that either sell this product and every one of them had some great application tips. I started out doing a lot of research before proceeding, it is important that you read all directions and technical information before choosing the right product for you. I went with this product because I am always a believer you pick the biggest hammer for the job. This is the higher of the lower end garage coatings. It is solvent based and there will be some strong orders involved with both products. Preparation -Preparation is the key. Clean floor thoroughly. If you have grease spots, rent a hot water pressure washer and or heavy degreaser for oily spots. I chose to etch with muriatic acid buy rubber boots, a disposable hand sprayer, and gloves. It will soak into your shoes even if they are water proof and make sure you flush your floor several times sweeping it away with a floor skwugy. Wear old clothing that you will throw away when you are finished. All materials will be disposed of when you are finished with this process but buy somewhat good brushes and rollers for the paint. You do not want to have fuze or lint in your finish when you are done. Have them shake all your paints, base and activators. You can go to your local hardware store and they can shake it for you along with getting plenty of stirring sticks for combining your 2 part kit once you are at home and ready to start. You will have a better consistency in your finish. Any inconsistency will be gone once you have applied your clear coat. There is a minimum time limit when you start painting. Follow it! Your paint will start setting up so I say, buy some extra paint cans and divide your kits into two cans as needed. It allows you plenty of time to do the job right. Save a little of both for touch ups when you are finished. You have a limited time to do this so follow the directions. One coat is ok for both items. Tape off areas you do not want over rolled. You will be in a hurry and this will save you time latter. Tear a small piece out of the sprinkle bag, do not put it in your hand and shake it out. You will get globs that way. In the bag has a better consistency to it. In the end, enjoy the new floor. It looks awesome and as good as any dealership floor. October 17, 2011
Rated 5 out of 5 by Seems to be a very durable product There were much cheaper alternatives to paint our shop floor but I wanted to do the job right the first time so I choose Rust-Oleum. I'm happy with the color (tile red) and if the paint sticks to the floor as long as it does my hands it will last for decades. It's only been a few weeks but I have no regrets in paying more because it appears to be very durable. February 20, 2013
Rated 5 out of 5 by Best on the market!... I've tried multipal differant applications on concrete...Rustoleum is clearly the best product on the market....***just follow the directions! December 18, 2012
1-3 of 3

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.