Model # 203373

Internet #202765176

Rust-Oleum EpoxyShield 2 gal. Silver Gray Semi-Gloss Professional Floor Coating Kit (Case of 2)
0320066051915

Rust-Oleum EpoxyShield

2 gal. Silver Gray Semi-Gloss Professional Floor Coating Kit (Case of 2)

  • Protects commercial and concrete floors from damage and wear
  • Perfect for garages and areas with heavy foot or vehicle traffic
  • Easy to apply and covers up to 400 sq. ft.
$18978 /case
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

  • Protects commercial and concrete floors from damage and wear
  • Perfect for garages and areas with heavy foot or vehicle traffic
  • Easy to apply and covers up to 400 sq. ft.
Rust-Oleum EpoxyShield 2 gal. Silver Gray Semi-Gloss Professional Floor Coating Kit (Case of 2) strengthens and protects shop floors and other commercial concrete surfaces. Apply for excellent wear, impact and abrasion resistance to heavy foot and vehicle traffic. This kit contains 2-part solvent-based epoxy coating, decorative color chips and detailed instructions.
  • Easy to use and apply, for garages, workshops, warehouses and more
  • Covers up to 400 sq. ft.
  • Semi-gloss finish
  • Easy-to-use, roll-able formula covers up to 400 sq. ft.
  • Heavy duty finish is resistant to chemicals, standing water and wear from heavy traffic
  • Able to clean with traditional household cleansers
  • Industrial strength formula provides superior resistance to chemicals, standing water and wear from heavy traffic
  • Light foot traffic after 16 hours
  • Clean up with mineral spirits

Product Overview

Rust-Oleum EpoxyShield 2 gal. Silver Gray Semi-Gloss Professional Floor Coating Kit (Case of 2) strengthens and protects shop floors and other commercial concrete surfaces. Apply for excellent wear, impact and abrasion resistance to heavy foot and vehicle traffic. This kit contains 2-part solvent-based epoxy coating, decorative color chips and detailed instructions.

California residents: see   Proposition 65 information

  • Easy to use and apply, for garages, workshops, warehouses and more
  • Covers up to 400 sq. ft.
  • Semi-gloss finish
  • Easy-to-use, roll-able formula covers up to 400 sq. ft.
  • Heavy duty finish is resistant to chemicals, standing water and wear from heavy traffic
  • Able to clean with traditional household cleansers
  • Industrial strength formula provides superior resistance to chemicals, standing water and wear from heavy traffic
  • Light foot traffic after 16 hours
  • Clean up with mineral spirits

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Container Size
2 GA-Gallon
Coverage Area (sq. ft.)
400

Details

Application Method
Roller
Coating Product Category
Paint
Color Family
Grays
Color/Finish
Silver Gray
Dry to touch (min.)
960
Interior/Exterior
Interior
Number of components in formula
2-part
Paint/Stain Base Material
Epoxy/2 part
Paint/Stain Clean Up
Mineral Spirits
Paint/Stain Key Features
Chemical Resistant,Moisture Resistant,Prevents hot tire pickup,Sealer
Paint/Stain/Waterproofer Product Type
Basement, Floor & Garage
Returnable
90-Day
Substrate/Surface Use Type
Concrete/Brick/Masonry/Stone
Time before recoating (hours)
16
Transparency
Solid

Warranty / Certifications

Manufacturer Warranty
Satisfaction guaranteed for full refund of purchase price

Specifications

Dimensions

Container Size
2 GA-Gallon
Coverage Area (sq. ft.)
400

Details

Application Method
Roller
Coating Product Category
Paint
Color Family
Grays
Color/Finish
Silver Gray
Dry to touch (min.)
960
Interior/Exterior
Interior
Number of components in formula
2-part
Paint/Stain Base Material
Epoxy/2 part
Paint/Stain Clean Up
Mineral Spirits
Paint/Stain Key Features
Chemical Resistant,Moisture Resistant,Prevents hot tire pickup,Sealer
Paint/Stain/Waterproofer Product Type
Basement, Floor & Garage
Returnable
90-Day
Substrate/Surface Use Type
Concrete/Brick/Masonry/Stone
Time before recoating (hours)
16
Transparency
Solid

Warranty / Certifications

Manufacturer Warranty
Satisfaction guaranteed for full refund of purchase price

More Products With These Features

Search

Questions & Answers

How do you recommend applying under the garage door?

Do you run to the end of the concrete slab on exterior side of overhead door? Or stop at the interior side of door? Just want to make sure have the right look.
Asked by: MooseKrause
Great question! We recommend stopping at the garage door, as our EpoxyShield Professional Floor Coating Kit is not UV stable, and may discolor over time on surfaces exposed to the sun.
Answered by: Rust-OleumSupport
Date published: 2017-09-05

Does this contain 2 boxes of the 2 gal kit?..

Asked by: depot
There is only one kit or two gallons per order. The case of 2 mentioned in the title is not correct, if you look in the specification it only lists 2 gallons.
Answered by: SH
Date published: 2017-08-25

How many squire feet per case ?

Asked by: Holland
Each kit of Rust-Oleum Professional Epoxyshield Floor Coating Kit will cover approximately 300-400 sq ft depending on the porosity of the surface. With that said, the product will have two kits in a case which would equal about 600-700 sq ft.
Answered by: Rust-OleumSupport
Date published: 2017-08-21

Can you put this over a garage floor that has cracks?

Asked by: Dennis
Hairline cracks do not need to be filled before applying Rust-Oleum EpoxyShield Professional Floor Coating. If you have larger cracks in the surface use Rust-Oleum EpoxyShield Concrete Patch & Repair Kit, let cure for 8 hours before applying Professional Floor Coating. http://www.homedepot.com/p/Rust-Oleum-EpoxyShield-24-oz-Concrete-Patch-and-Repair-Kit-215173/202097324
Answered by: Rust-OleumSupport
Date published: 2017-08-31
  • y_2017, m_9, d_18, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_51
  • loc_, sid_202765176, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 201ms
  • QUESTIONS, PRODUCT

Customer Reviews

2 gal. Silver Gray Semi-Gloss Professional Floor Coating Kit (Case of 2) is rated 3.9 out of 5 by 9.
Rated 5 out of 5 by from I have done about 5 garage floors using this material. Not a single peeling even where the tires... I have done about 5 garage floors using this material. Not a single peeling even where the tires contact. Go rent a diamond floor grinder at Home Depot and prepare the surface so it's exposed concrete not a smooth job like poured and finished real smooth. That type of surface it will peel . Then after diamond grinding etch and clean per instructions. Mix the components and wait 20 minutes then apply. Best product out there for money. Equal to professional job when done properly.
Date published: 2017-05-06
Rated 1 out of 5 by from This is a terrible product. I had to epoxy my 2 car garage twice. The first time faded spots appe... This is a terrible product. I had to epoxy my 2 car garage twice. The first time faded spots appeared. The second time, it turned yellow. Rustoleum did not cover it under warranty because the said it was caused by sunlight and that is not covered. I only have a small window in my garage door and it has a shade on it. I think it was a defective product. I do not recommend this product.
Date published: 2017-07-17
Rated 5 out of 5 by from Awesome product. Prep is key! Great product. As others have said, this is the professional version so it is solvent based and much better quality (and thicker) than the water based version for not much more money. It's just harder to find locally. Prep is key. I spent many hours just in the prep. - Power wash (3100 psi) - Degrease - Power wash again - Acid etch - Concrete patch and repair - Epoxy - Clear coat Waiting several days between each step. I have a standard two garage which is about 500sq ft. I used a kit and a half and about gallon and a half of the clear which includes the anti skid. One good coat for each. One kit may have been enough but I applied it think with a 1/4 nap epoxy roller. The clear is a must do. For a little more money it really makes the floor shine and increases uniformity. The catch with the clear is it is hard to see where you have applied it during application. Looks great once dried. Very pleased overall and hope it lasts! Have a buddy helps. I was able to roll while my buddy followed behind with the flake. Good luck!
Date published: 2017-09-13
Rated 1 out of 5 by from Garbage I have used this product on 3 different garage floors. All 3 peeled and faded within 6 months.
Date published: 2017-04-07
Rated 4 out of 5 by from Good by itself. Great with Clear Coat Be SURE to prepare the surface REALLY well. If this isn't done correctly, the coating WILL peel. Floor preparation accounts for 90% of this project. I can not stress it enough.....FLOOR PREP IS KEY. The coating goes on rather easily. Be SURE to keep "wet lines" while applying to each 4x4 section. If not, transitions lines will be VERY visible. If transition lines are present, they can be corrected by applying Rust-Oleum's clear coat epoxy (HIGHLY recommended). Not only another level of protection for your already GOOD looking floor, but a GREAT looking clear coated floor you can be proud of. Sorry website wouldn't upload any pics.
Date published: 2014-06-11
Rated 5 out of 5 by from Great. Easy. Use an electric mixer. ... Great. Easy. Use an electric mixer.
Date published: 2017-04-08
Rated 5 out of 5 by from Excellent results... Excellent results
Date published: 2017-08-22
Rated 4 out of 5 by from Good Product, Excellent Value, Here Some Tips... I have used this product twice now and have learned some tips specific to this brand. Note, these tips are for the PROFESSIONAL floor coating system, not the standard edition. They are different. 1.) Unless you have a brand new slab of concrete, as always, take the time to do all the prep-work completely and correctly... a.) Clean garage floor with bleach and TSP and rinse, b.) de-grease with mineral spirits on tough stains and then wash again with an industrial de-greaser and rinse. c.) power wash, preferably at 3,000 psi. d.) Acid etch with phosphoric acid, muriatic acid, or similar, then neutralize with baking soda and rinse. e.) power wash again. f.) rinse, rinse, rinse until efflorescence (white powder) stops being left behind as a residue. 2.) Very porous concrete and/or cracked concrete will need to be patched. The Rust-Oleum Epoxy patch works well, but it quite expense per sq ft. I found cementitious products did not feather-out to the degree I wanted for a smooth finish. I would recommend something like Pro Chem's Sure Patch or perhaps a polymer modified concrete. The other option is to complete re-float the floor. 3.) When using the product I recommend the following: a.) Definitely do two coats. Why? Because your patches and your older concrete will absorb the epoxy at different rates and will end-up providing some areas with a flat finish and others with a glossy finish. By using two coats, you'll seal the floor first and then get a consistent finish coat. b.) If using only 1/2 the product per coat, DO NOT mix the entire batch and stick half in the freezer. Measure part A and B and mix only that amount. Otherwise your 2nd coat will be a gloppy mess. c.) I highly recommend thinning the product before application. Why? Because I found that otherwise it does not flow-out very well and will leave the texture of the roller imprinted in the coats. According to Rustoleum Epoxy Shield Technical Support, the product can be thinned-out up to 3% with Xylene. I suggest closer to 1.5% (Thus, 1.9 oz of Xylene per mixed gallon). d.) I also highly encourage you to use the paint chips as they nicely hide any irregularities in your concrete. 4.) I also highly recommend finishing with a clear coat. I did use the Rustoleum Clear High-Gloss 2-Part Premium Floor Coating Kit (note: cannot buy in CT, must go the NY) and I was very pleased with the results. By using a clear-coat, if at any time you want to fix scratches and scuffs, just give a quick sanding and throw-down another coat. However, please note that the solvent used in this specific product is very difficult to find and costs about $100 per gallon. So, do not plan on cleaning any tools you use to apply this product. Plan to throw-away any brushes and rollers used, and thus buy cheap ones for this project. 5.) MAKE SURE TO WEAR A RESPIRATOR (which is NOT a dust mask) with either of these products. Good luck and have fun!
Date published: 2015-10-25
  • y_2017, m_9, d_18, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_, sid_202765176, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 115ms
  • REVIEWS, PRODUCT