Rust-Oleum EpoxyShield 24-oz. Concrete Patch and Repair Kit-(4 Pack)-215173 - The Home Depot
Discontinued

Rust-Oleum EpoxyShield

Model # 215173

Internet # 202436265

Store SKU # 939856

24-oz. Concrete Patch and Repair Kit-(4 Pack)


Rust-Oleum EpoxyShield 24-oz. Concrete Patch and Repair Kit-(4 Pack)
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$87.36 / case
Loading...

PRODUCT OVERVIEW

Model # 215173

Internet # 202436265

Store SKU # 939856

Rust-Oleum EpoxyShield Concrete Patch and Repair permanently bonds concrete. Apply to concrete, masonry or metal for stronger-than-concrete protection. Use for patching cracks and holes.

California residents: seeProposition 65 information

  • Heavy-duty formula permanently bonds concrete
  • 24-oz. package
  • Carton contains two plastic tubs with 16 fl.-oz. (473 ml) of part B base and 8 fl.-oz. (237 ml) of part A activator
  • Flat gray finish
  • Subject to or will include a PaintCare recycling fee in the following states: CA, CT, OR, RI, VT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Assembled Depth (in.)  4 in  Assembled Height (in.)  7.63 in 
Assembled Width (in.)  4 in  Container Size  1 QT-Quart 
Coverage Area (sq. ft.)  14 
Details
1-part, 2-part or 3-part formula  2-part  Application Method  Putty Knife or Trowel 
Chemical resistant  No  Cleanup  Mineral Spirits 
Color Family  Grays  Color/Finish  Gray 
Dry to touch (min.)  480  Exterior use  Yes 
Hazardous Code  No Air  Interior Paint & Stains Product Type  Concrete/Basement/Garage Floor Coating 
Interior/Exterior  Interior/Exterior  Paint Product Type  Interior Paint/Stain 
Prevents hot tire pickup  No  Primer required  No 
Returnable  90-Day  Sealer  No 
Skid Resistant  No  Surface use  Concrete 
Time before recoating (hours)  Type  Epoxy 
Waterproofer  No 
Warranty / Certifications
Manufacturer Warranty  Satisfaction Guaranteed 

CUSTOMER REVIEWS

Rated 4.3 out of 5 by 6 reviewers.
Rated 4.0 out of 5.0 by epoxy for garage floor repairs Product mixes easily. It is very viscous, more so than joint compound for drywall, so you have to work hard at smoothing it out. It is very important that the hole or crack is just filled to the level desired and not much overfilled for the following reason: sanding (36-80 grit) is possible but is not easy, even with a good 1hp power sander. This epoxy is much, much harder than auto body compound to sand, which is probably a good thing, considering its use. A hole of size between a bb and a thumb can be filled effectively. A diamond grinder would be much more effective than sanding if the area is at all large. These grinders can be rented, but are big machines. September 2, 2014
Rated 5.0 out of 5.0 by Easy to mix and apply I used this product to seal the inside of the upper and lower bowls of a large garden fountain. The patch mixed easily and was simple to trowel onto the inside of each garden fountain bowl. It dried in about 4-5 hours and sealed the inside surface of each bowl so no further deterioration of the fountain structure will occur. Now we will re-paint the outside of the fountain and start it up again. April 15, 2014
Rated 4.0 out of 5.0 by Great stuff Really good stuff for repairing smaller cracks in your concrete. It sets up rather quickly so you need to make sure you have everything in place. October 21, 2014
Rated 5.0 out of 5.0 by Great product that worked well! We used this product to patch holes in our garage floor before we used Rustoleum's Epoxy Shield floor coating. This worked very well to patch the holes, some as big as plums. It smoothed out well and dried as fast as it was suppose to. I did the hole and crack repair in the evening and applied the epoxy floor coating the next morning. We had no problems at all with either product. I highly reccomend it to others! September 30, 2014
Rated 4.0 out of 5.0 by Works as expected I used this in between the epoxy and the gloss. It worked fine. Filled in the cracks well. My advise don't do as I did, instead fill in the cracks before using the epoxy. I was not planning on filling in the cracks but then decided to do it right before applying the gloss coating. It looks fine and even took the specs i through down but it drys a darker color then the epoxy. September 22, 2014
2 >>

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.