The product you chose is discontinued, but we found something similar you might like.
4 gal. 10X Advanced Graywash Deck and Concrete Resurfacer
  • Rust-Oleum Restore
  • Model 291494
  • Internet #205854015
  • Store SO SKU #

4 gal. 10X Advanced Graywash Deck and Concrete Resurfacer

$8500 /each
Discontinued Model:

Model # 46529

Internet #203642990

Rust-Oleum Restore 4-gal. Graywash Deck and Concrete 10X Resurfacer

Discontinued Rust-Oleum Restore

4-gal. Graywash Deck and Concrete 10X Resurfacer

store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

Deck and Concrete Restore 10X is a problem solving coating formulated to repair beautify and protect. It is ideal for old previously coated wood, bare wood, brushed concrete and most synthetic decking with proper surface preparation. 10X is ten time thicker than ordinary paint.

  • Liquid Armor Resurfacer for wood and concrete
  • Water based, one part, ready to use
  • Beautifies and protects
  • Fills cracks up to 1/4 in.
  • Covers up to 100 sq. ft., two coats required
  • Excellent slip resistance
  • 10 times thicker than paint or stain
  • Tested and proven performance - last up to 12 years
  • 60 Available colors
  • Lasting moisture protection
  • Actual paint colors may vary from on-screen and printer representations
  • Colors available to be tinted in most stores
  • Online Price includes Paint Care fee in the following states: CA, CO, CT, MN, OR, RI, VT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

My deck is showing signs of dry rot and algae...what would need to be done before using this product?

Asked by: Chica
Hi Chica, All rotted wood must be replaced and the deck thoroughly cleaned. Be sure to follow the manufacturers directions for preparation and application of this product. Mike,
Answered by: Jet1
Date published: 2015-11-07

WHAT TYPE OF PREPARATION WOULD AN OLDER WOOD DECK need done to it before the 1st application of RESTORE?

my deck was originally stained and hasn't been done in 7 years.
Asked by: EMGUB
Step 1 Light Repairs: Raised nail heads and/or screws should be secured before applying Deck & Concrete Restore 10X. If the galvanized coating is removed, the product will need to be taken down to bare wood only over the nails and/or screws and a rust inhibitor should be sprayed on the nail heads and/or screws. Touch up work will need to be done over those affected areas using left over Deck & Concrete Restore 10X. Using a power sander on the deck should be done with care to ensure galvanized coating is not stripped off the nail heads and/or screws. Remove loose splinters and replace severely damaged or rotting boards. Fill larger cracks using RESTORE CRACK FILLER or similar acrylic, non-silicone filler. Allow to dry. Step 2 Clean: Clean the surface using a brush and the Restore Deck & Concrete Cleaner. The surface must be completely clean and free of dirt, grease, mildew and organic growth to ensure product bonding and adhesion. For best results use a pressure washer to remove embedded dirt and grime. (Use at a low setting 500-1200 PSI. Do not use high pressure as it may harm the wood.) For grease and oil spots use tri-sodium phosphate (TSP) according to manufacturer’s directions to remove stains. For mildew and other organic growth use a diluted solution of household bleach (3 parts water to 1 part bleach) applied to the surface before cleaning. Loose paint needs to be scraped or sanded (use 50 grit sand paper). Step 3 TEST SURFACE BEFORE APPLICATION: After cleaning the surface you MUST conduct a splash test to ensure proper adhesion. Previously applied sealers may be present on the deck and are not always visible. ALL EXISTING SEALERS, PAINTS, STAINS, WATER REPELLENTS OR OTHER FINISHES MUST BE REMOVED in order for Restore 10X to adhere properly. To check for the presence of these, conduct a splash test by sprinkling water on multiple areas of the surface. Check at least 4 areas, or more for larger areas. Be sure to check both high traffic areas such as walkways and non-traffic areas. If the water absorbs rapidly into the surface, the surface is ready to be coated. If the water beads, puddles or is not absorbed, the surface is sealed and not ready to coat. If the surface is sealed, remove the sealer/coating with a deck stripper or sand paper (use 50 grit). Clean again with a brush and Restore Deck & Concrete Cleaner and conduct the splash test again. Continue this process until the water is absorbed by the wood in all test areas. Let the surface dry completely before application. Failure to follow this process will result in poor adhesion and possible coating failure.
Answered by: RestorePro
Date published: 2015-09-20

What size cracks can be filled with this product? some wood is rotten and it needs to be filled in

Asked by: coach
Deck & Concrete Restore 10X will fill cracks up to 1/4". Cracks larger than 1/4" should be filled using Restore Crack Filler prior to application of Restore 10X. Rotten wood should be removed and replaced prior to application of Restore 10X.
Answered by: RestorePro
Date published: 2015-09-20

Can it be applied to new wood, if so how soon???

Asked by: aweehsa
New wood must be completely dried prior to the application of Restore in order to ensure proper adhesion. We recommend waiting a period of at least 6 months before application to new wood.
Answered by: RestorePro
Date published: 2015-09-20
  • y_2017, m_7, d_18, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_, sid_203642990, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 60ms

Customer Reviews

4-gal. Graywash Deck and Concrete 10X Resurfacer is rated 3.0 out of 5 by 3.
Rated 5 out of 5 by from Great product After putting the first coat on the deck, it looked really good. Then once the second coat went on, the deck looked amazing. Easy to apply and clean up.
Date published: 2013-08-29
Rated 3 out of 5 by from The product is too thick The product is too thick and does not roll evenly. I will try a different roller brush for the next coat to see if it goes on more evenly.
Date published: 2013-07-17
Rated 1 out of 5 by from Peeled after only 6 months. After reviewing this product I purchased enough to paint 2 decks and 2 porches. Luckily I was only able to paint 1 deck and the 2 porches. The paint peeled and chipped off after only 6 months!! I will not be using this again!
Date published: 2014-11-19
  • y_2017, m_7, d_19, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_, sid_203642990, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 68ms