Model # 264985

Internet #203815331

Store SKU #748338

Rust-Oleum Specialty 12 oz. Gloss Clear Triple Thick Spray

Rust-Oleum Specialty

12 oz. Gloss Clear Triple Thick Spray

$3.76 /each

Choose Your Options

Number per Package

Frequently Bought Together

Product Overview

Triple Thick Glaze is a protective coating that gives a glass-like finish. It provides a protective topcoat that applies thicker than other clear coatings. Great for wood, metal, wicker, plastic, glass, plaster and paper. Can be applied for indoor or outdoor use.

California residents: see   Proposition 65 information

  • Oil based formula, provides a thick and glossy protective topcoat for art and craft projects
  • Spray any angle and comfort tip for easy application
  • Dries to touch in 5, to handle in 20 and fully dry in 24 hours
  • Coverage up to 10 sq. ft. to 20 sq. ft.
  • Tapered brush in the cap makes it quick and easy to touch up small nicks and scratches
  • Gloss sheen
  • Cleans up with lacquer thinner

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Can this be used for outdoor flower pots even with rain?

Asked by: Gen
Yes, it certainly can, Gen. Rust-Oleum Specialty Triple Thick Glaze is suitable for use on indoor or outdoor surfaces.
Answered by: Rust-OleumSupport
Date published: 2017-02-03

Would this be suitable for a top coat on a dining table? I.e. Can it handle the heat and condensation from cups, etc.

Asked by: Laird
Rust-Oleum Specialty Triple Thick Clear Spray can be used on a dining table. The product can handle up to 200 degrees of indirect heat. If the product is applied too thick, you can see blushing (or moisture) in the film of the product. It basically looks like a haze. If this does happen, you can use denatured alcohol to draw the moisture out. Best practice is to make sure when you're spraying that you do several light coats, versus heavy coats.
Answered by: Rust-OleumSupport
Date published: 2016-09-20

Can this be used on the outside of a stainless steel tumbler that people drink out of?

Asked by: Joyce
The question was on the outside of a stainless steel tumbler not coming in contact with a food or beverage. Can it be used on the outside of the tumbler?
Answered by: Jj
Date published: 2016-09-15

Can this be used on top of a spray painted surface?

I'm trying to achieve that super glossy look on a table I've spray painted, the gloss spray paint isnt quite glossy enough. I want it to look like glass
Asked by: Pamiluh
You sure can, Pamiluh! We recommend that you scuff sand the previous paint with a 180/220 grit sandpaper to abrade the surface prior to use the Rust-Oleum Specialty Triple Thick Spray. You’ll also want to clean the surface with a degreaser such as dish soap and water prior to applying the product.
Answered by: Rust-OleumSupport
Date published: 2016-07-26
  • y_2017, m_4, d_30, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_17
  • loc_, sid_203815331, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 102ms

Customer Reviews

12 oz. Gloss Clear Triple Thick Spray is rated 2.3 out of 5 by 10.
Rated 5 out of 5 by from I'm Impressed I have purchased and used 1 can of triple thick glaze. The reason that I only purchased 1 can was that I have tried many products that did not turn out to be appropriate for my use. Since I am a professional artist and use a reasonable quantity of my staples, I will be purchasing this product in volume. My use and experiment was coating primed acrylic painted wood fish sculpture both without finish and with previous finishes. The results were most impressive given that I fully expected reactions with the previous finishes and the weather was hot and humid( Fl in Summer). I only had 1 reaction and no bubbles, snow, or milk in the finish with heavy application. Immediately after the application I did place them in my a/c studio to dry. Great product!
Date published: 2016-06-01
Rated 1 out of 5 by from Abysmal Product. Ruins painted projects. Don't buy! I was building a painted project for my college kids and thought this would be a great topcoat. Sadly, it did not dry clear but left a cloudy, blotchy, milky appearance over the brightly colored paint underneath. This is not the dry spray discussed in other reviews here but a milky appearance over the top of the paint. Ventilation was fine (in my shop where other projects have been painted); temps were fine (75 degrees), and humidity within range (58%). Gotta admit, I'm pretty angry about all the work I've done that now needs to be redone. Wish I'd never used this stuff. Do yourself a favor, never, never, NEVER buy this stuff. It's pure junk.
Date published: 2016-06-25
Rated 5 out of 5 by from Clear Cover It does take more than one coat. It soaks into wood that has been painted 3X, so plan on extra. It is not expensive, so that helps. I also painted clay pots. I only applied one coat to the pot itself and it wasn't thick and glossy, but with more coats it might have been. I wanted to protect the paint. I painted the wooden table tops and clay with acrylic house paint and it sealed it just fine.. The saucers are getting at least 2 coats as I want them waterproof. I sealed the inside of the clay pot with aquarium silicone. It still covers better than less thick glazes. I liked it and bought more to finish the job. I also had some Viva Decor gold on the clay pot and it sealed it fine also.
Date published: 2013-08-26
Rated 1 out of 5 by from Horrible Product Tried to use this product over black matte painted 11' X 14" picture frames to add a gloss finish. The paint dries within a few seconds on each part of the frame. Unfortunately, while spraying the last section of the frame, residual spray will spread to the 1st section painted with a resulting foggy appearance. BEWARE: The final dried product (30 minute after application) will be different than first observed. Using a minimal spray is inadequate. You cannot sand (color changes to a charcoal gray color). Cannot reapply without sanding even if you wait a week without resultant rippling/bubbling with minimal spray. Have destroyed 3 picture frames. NEVER PURCHASE THIS PRODUCT!!!!!!!
Date published: 2016-09-24
Rated 1 out of 5 by from horrible I wanted to have a hard durable surface for the kitchen counter that I painted with 123 primer, flat copper acrylic paint, then rustoleums copper metallic and craft paint to give a vertigris look. It looked great and I called the company to get their best recommendation for a hard top coat. I asked all the questions I thought were relevant, including distance from surface, re-coat time, how long till cured, where I lived temp wise and what I was doing, my kitchen counters. Well today I did 3 light coats, waiting 10 min in between and it showed a whitish dull haze. I called them back and was told that it would dry clear, just the solvents drying. 3 hrs later still had a dull finish and varied from clear to dull in areas. Called back got a guy who told me that the spray was drying before hitting the surface because it was too hot. Told me now I had to wipe off, sand and re-coat once I got the temp down to 75. Laid all the blame on me for the product failure. Pretty angry since I didn't have the time to mess with this further and now I have to do so much work to fix the problem this awful product caused.
Date published: 2016-06-20
Rated 2 out of 5 by from Drip drip drip Nice and thick, But will act as a solvent and make any paint under the glaze thin out run. Regular clear coat won't remove the base paint like this will.
Date published: 2016-05-06
Rated 1 out of 5 by from horrible I was painting a metal chair it was primed and base coated, when I sprayed the stuff on a white dust residue built around where it didn't spray
Date published: 2015-08-14
Rated 1 out of 5 by from white dust and cloudy finish I have spray painted a thousand things - wood, metal plastic, with colored paint and clear glazed and never had a problem. I painted in the garage, in the shade, and when it was 70 degrees and low humidity. This left white dust and a splotchy cloudy finish. terrible product. My project is ruined and now I have to start over. Waste of money and time.
Date published: 2016-04-24
  • y_2017, m_4, d_30, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_, sid_203815331, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 89ms