0033287141524

Suggested Replacement

15-Amp 10 in. Sliding Miter Saw with Laser
  • Ryobi
  • Model TSS102L
  • Internet # 205216332
  • Store SKU #1000053377

15-Amp 10 in. Sliding Miter Saw with Laser

Was  $199.00
$179.00 /each

Save $20.00 (10%)

Compare to Discontinued Model View Product

Discontinued Model

Discontinued

Ryobi

Model TSS101L

Internet #202049523

13-amp 10 in. Sliding Compound Miter Saw with Laser

This item has been discontinued.
The Home Depot no longer carries this specific product.

Frequently Bought Together

Product Overview

This RYOBI 10 in. Sliding Compound Miter Saw with Laser features nine positive miter stops with ball and detent action for precision cuts. With the 10 in. carbide-tipped blade, you can make smooth cuts. For added safety, use the electric brake to quickly stop the blade. You also have added support with the table extensions for when you're working with large pieces.

California residents: see   Proposition 65 information

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

2 Questions6 Answers

Customer Questions & Answers

13-amp 10 in. Sliding Compound Miter Saw with Laser
13-amp 10 in. Sliding Compound Miter Saw with Laser

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 13-amp 10 in. Sliding Compound Miter Saw with Laser
 
5 answers

What is the length of the cut?

This question is from 13-amp 10 in. Sliding Compound Miter Saw with Laser
Asked by
San Antonio
Read all my Q&A
November 20, 2013
How wide a board will it cut through?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
ca
Read all my Q&A
December 1, 2014
Answer: 
12 inches
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Breese, IL
Read all my Q&A
November 4, 2014
Answer: 
12 inch
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

April 17, 2014
Answer: 
It didn't matter, I was doomed from the start. I at first tried adjusting to get square and plumb but no luck because of the table issue.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Pelham, Alabama
Read all my Q&A
December 26, 2013
Answer: 
The manual says it will crosscut up to a twelve inch board. I checked it against an eleven and a half inch board on the display at the store and it will cut it.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Atlanta, GA
Read all my Q&A
December 2, 2013
Answer: 
Hi SaIT,
Thanks for your question and interest in this item. More information is needed to accurately answer your question. Please contact our Online Customer Service Department at 800-430-3376 to get more assistance with this item. Our hours of operation are between 6:00 a.m. and 2:00 a.m. Eastern Time daily.
-3points
0out of 3found this answer helpful.
Was this helpful?helpful0unhelpful3
This question is from 13-amp 10 in. Sliding Compound Miter Saw with Laser
 
1 answer

Which is cost

This question is from 13-amp 10 in. Sliding Compound Miter Saw with Laser
Asked by
Read all my Q&A
November 28, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
THDSupport
Read all my Q&A
December 9, 2015
Answer: 
Thank you for your recent inquiry with The Home Depot, Cjme. Unfortunately, this item is discontinued and is no longer in stock or available to be purchased. The item will remain on the website for customer reference, and the description will be updated with “Discontinued” if it has not been already. We may have an alternate item that would suit your needs. We appreciate your business and look forward to Read More
Thank you for your recent inquiry with The Home Depot, Cjme. Unfortunately, this item is discontinued and is no longer in stock or available to be purchased. The item will remain on the website for customer reference, and the description will be updated with “Discontinued” if it has not been already. We may have an alternate item that would suit your needs. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-09-08 T12:21:33.547-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202049523, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 222ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.8 out of 5 by 156 reviewers.
Rated 5.0 out of 5.0 by I'm really glad I got this tool !!! Got this sliding compound miter saw the other day. I had looked at several others online and this one has the best price for what you get. I was thinking about getting a plain compound miter but then I thought what if I need to do straight cuts on larger sizes of wood; can't do that with a plain miter. I also would need to buy a circular saw too in order to do that task. So this is really 2 tools built into 1. My 1st project was to build a work bench for it. I got all of my materials and finished the job; took about 3 hrs. This is my first time using a compound miter saw as well. I used a miter box and saw.... in the past;but this is so much easier and faster....Can't wait for my next project.... February 4, 2013
Rated 1.0 out of 5.0 by Litterally Falling Apart As a homeowner, I bought this saw along with the Ryobi stand a little less than a year ago to do my basement reno project. I have been using it with little issues for the first several months. Now that I am close to the end of my project that saw started falling apart. The plastic blade guard fell off due the attachment braking off. Additionally the front knob that is used to set the angles also broke off and is just dangling from the arm. The laser has become skewed and no longer usable. I was hoping this saw would have been with me for years to come as I own whole line of Ryobi power tools and accessories. This was very disappointing. I will look for a replacement but another brand. This experience will make be reconsider buying other Ryobi power tools. August 17, 2015
Rated 2.0 out of 5.0 by Ryobi 10" sliding mitre saw This saw is very well priced and and is a great value at that price, however the mitre stops are not as positve as one needs. In using the saw I found that in tightening the locking screw to hold the saw at the mitre stop, the saw moved position, not holding true. With very little effort one can move the saw from its locked position off its mark without unlocking it. Ryobi would have a excellent saw if the stops were solid locks rather than a ball in hole detent and a lock that engages a serated guide that doesn't hold position. Bed was flat and operation was easy to use. I am returning this and may try another Ryobi or may upgrade to another saw. October 5, 2008
Rated 1.0 out of 5.0 by Lacking in precision and versatility Before you buy this saw, check the fence to be sure it is straight. The fence on the Ryobi saw I purchased was not straight, making precision cuts almost impossible. When I went back for a replacement saw, I found two others with crooked fences. Ryobi needs better quality control here. Also, consider whether you will need to cut wood thicker that 3 1/2 inches. And look carefully at the saw's angle cut capabilities, as they are quite limited, and you may want greater versatility. Otherwise, this saw has performed well, and the price was competitive. But if I buy another miter saw, I'll spend more to get more. November 12, 2009
Rated 5.0 out of 5.0 by How did I live without this? I bought the Ryobi from Home Depot and ordered a Port-A-Mate Miter saw work stand from elsewhere. They are a great set and allow me to move my saw from the garage, where I do cabinetry, to the garden, where I use the miter saw to cut through landscaping 4x4s to build raised beds for the garden and to put around the trees in my orchard. The angles cut precisely and the slide on the saw is great for cutting 2x10s for the garden. Before purchasing the Ryobi, I was using my table saw and had to flip the 4x4s to cut through if I was not cutting at 90 degree angles. Cons - The saw dust collector fills up very rapidly with 4x4 cuttings. June 25, 2013
Rated 1.0 out of 5.0 by High hopes This saw might be ok for doing a deck but not for anything that requires accurate cuts. I had to recalibrate the Mitres and bevels three times and when i finaly took it back the saw was out 3 1/2 degrees. Home depot was good about it and took it back and gave me a great deal on a bosch saw. Also the lazer was not even close to the cut, and due to the location it would get covered in dust with every cut. You get what you pay for i guess. The only thing i liked about this saw was the stand it came with. Also the screw to hold the blade in was cross threaded on the first one i brough home. September 18, 2010
Rated 1.0 out of 5.0 by Bad Quality I have restored motorcycles and cars for the past 40 years ... I mention this to illustrate I am not a novice when it comes to tools; however, to be fair I am not a journeyman carpenter. This tool was purchased for a deck project with the intent of selling it after the deck was completed; therefore, I purchased a lesser quality saw ... mistake! The saw was very difficult to true and square the blade with the deck. This problem was greatly amplified when making mitered joints and angle cuts. Scale calibrations would not hold for more than a few cuts. Don't Buy Ryobi ... Go ahead and spend the money for a higher quality saw particularly if you are going to be doing detail work and, you are critical of your own work! November 4, 2014
Rated 5.0 out of 5.0 by Amazing value for money Bottom line is this saw is far superior to the similar priced version from craftsman and (kobalt - lowes brand). The other are sloppy, loads of play on them, but the ryobi is solid, I've had it for 2 years for onsite work and it's still going strong. The main area where the others fail is the locking mechanism for the miter angle, as you tighten at the angle you want the bed moves against the fence throwing the angle off, the Ryobi mechanism is better designed so the place you start to tighten the angle lever is the place it stays. If you have 600 spare get the big brand that is superior still to the ryobi, but you won't be disappointed with the 200$ you spend here. December 12, 2013
  • 2016-09-08 T12:58:10.984-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_156, tr_156
  • loc_en_US, sid_202049523, prod, sort_default
2 3 4 5 6 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 157ms
  • REVIEWS, PRODUCT