Ryobi 18-Volt ONE+ SDS-Plus Rotary Hammer Drill (Tool-Only)-P221 - The Home Depot


Model # P221

Internet # 202347155

Store SKU # 1000042650

18-Volt ONE+ SDS-Plus Rotary Hammer Drill (Tool-Only)

Ryobi 18-Volt ONE+ SDS-Plus Rotary Hammer Drill (Tool-Only)

This item has been discontinued.
The Home Depot no longer carries this specific product.

$99.00 / each
  • Over 50 great ONE+™ tools work with the same 18V battery platform
  • Any 18V ONE+™ blue or green tool works with any 18V ONE+™ battery
  • 2-mode switch for rotational only and rotary hammer applications


Model # P221

Internet # 202347155

Store SKU # 1000042650

The RYOBI ONE+ SDS-Plus Rotary Hammer Drill is a versatile tool for drilling multiple masonry surfaces. It accepts both NiCd and lithium-ion 18-volt ONE+ batteries (not included) and delivers variable speeds up to 1250 RPM and over 5000 BPM. Its adjustable depth rod allows consistent depth between holes. The auxiliary handle rotates 360 degrees for greater comfort.

California residents: see  Proposition 65 information

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Assembled Depth (in.)  12.795 in  Assembled Height (in.)  7.874 in 
Assembled Width (in.)  3.15 in  Maximum hole diameter (in.) 
Product Depth (in.)  12.795 in  Product Height (in.)  7.874 in 
Product Width (in.)  3.15 in 
Amperage (amps)  Blows per Minute  5000 
Chuck Size  1/2 In.  Chuck Type  SDS-Plus 
Clamshell/Jam pot  Neither  Color Family  Green 
Cord Length (ft.)  Corded Tool Type  Hammer Drill 
Cordless/Corded  Cordless  Drill/ Driver Type  Hammer Drill/ Driver 
Forward/reverse switch  Forward switch and reverse switch  Maximum Speed (rpm)  1250 
Power Tool Product Type  Cordless  Product Weight (lb.)  4.97 lb 
Reconditioned  No  Returnable  30-Day 
Side Handle Included  Yes  Tools Product Type  Power Tool 
Variable Speed  Yes 
Warranty / Certifications
Certifications and Listings  1-UL Listed  Manufacturer Warranty  3 Year 


Rated 4.5 out of 5 by 76 reviewers.
Rated 5.0 out of 5.0 by Great tool with limitations. I purchased this for occasional use and for the convenience of being cordless. I used it today for the first time and it took exactly 56 seconds to drill a 1/2 inch hole 3 1/2 inches deep in a 26 year old concrete slab in good condition (concrete was made with hard round river rock not crushed limestone). The corded rotary hammer I usually use would have done it in half that time or less but I would have needed to bring a generator and and an extension cord to use it. I looked at the non-paid comparative reviews and side by side testing before I purchased this and the ones that did better cost as much as 8 times more, many of the ones that cost more including the dewalt did worse or equal. December 28, 2014
Rated 5.0 out of 5.0 by Another tool in the Arsenal I was very pleased with the performance of this tool. It is easy to use, light weight, durable and has plenty of power. I used this tool for a whole day and only changed out the battery in the last hour of a 10 hour shift so I can say I am impressed with the run-time. I like the convenience of not having to drag a cord around or fighting to free a snagged cord. It has saved me both time and hassle. This has become another valued tool in my arsenal. I would recommend this tool. January 27, 2015
Rated 5.0 out of 5.0 Awesome Rotary Tool I paid about $ 99.00 for this drill and it is worth every penny. This is an incredible time saver and it powers through the toughest masonry, stucco, brick. March 24, 2015
Rated 5.0 out of 5.0 by So far, so good. I usually drill 1/4" , 2" deep holes for anchors and can drill 50+holes before the battery even thinks about stopping. Its light weight and has plenty of power for the price. I use the one+ 4AH batter for the best life. Not sure why the other reviewer was using Nicads when the LI are available and last so much longer. Wish it had hammer only setting but thats why its not super expensive. Oh and its hard to leave behind cause its such a bright green!! And my co-workers wont touch them because for some treason, they dont like ryobi September 14, 2014
Rated 4.0 out of 5.0 by Know what You are Buying It is a great tool as long as you know a few things. It has an SDS chuck, which means you need special drill bits; it cannot handle regular bits. Second, it switches from drill only to drill + hammer; it cannot perform hammer only, so it cannot take chisels. With this in mind, it is a great tool and performs the tasks well. A great add to my Ryobi collection. July 2, 2013
Rated 5.0 out of 5.0 by High quality and unexpensive Ryobi tools get professional work done I have been doing commercial HVAC since mid-2010, and I have used this rotary hammer (and about six other cordless Ryobi tools) to build ductwork in new hospitals, schools, apartment buildings, and super stores (Walmarts). Ryobi tools are rated as DO-IT-YOURSELFER tools. However, I have used them for PROFFESSIONAL work. And, yes. They get the job done. I start to see more Ryobi tools in job sites.They all come with a 3 year warranty (just like Dewalt's). But, without the expensive price tag. the only bad thing I find in this rotary hammer is that it doesn't have a "hammer only" function--- I couldn't put chisels in it in order to break concrete. but, for the price, I can't really complaint. January 28, 2014
Rated 5.0 out of 5.0 by Works Great Bought this to drill a few 1 inch holes in masonry block in my outdoor BBQ. Combined with some inexpensive masonry bits from Harbor Freight, this setup worked like a charm. Tool appears to be well built and sturdy. Like most Ryobi products, it strikes a good balance between workmanship and price with no worries about it breaking when I need it. July 22, 2014
Rated 5.0 out of 5.0 by Commercial Construction I am in the Communication industry, but got this for a personal xmas gift . well just to try this on a whim took it to work to try it out.. Drill 12 5/8" with out a issue . went head to head with a 30lbs BOSH hammer . Of course I loss but that was the funny part . 799.00 drill vs 99.00 drill. I lost by 2 holes not counting the time it took to look for cords finding bits ect. ... Way to go Ryobi . now if they would only make a band saw then they would rule over Milwaukee . January 24, 2015
2 3 4 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.