Rated 3.5 out of 5Â by 60
Rated 2 out of 5Â by Hergules Home Depot & Ryobi should list Battery Specifications
It appears that Ryobi & HD don't list battery spec's for a reason. The bundled and promoted items usually include poorer performing (i.e. cheaper) batteries. You should ALWAYS buy one of the better (higher amp-hr) batteries for your Ryobi 18V power tools. Don't by the cheap promoted batteries.
Below are the battery specs for Ryobi 18V batteries as supplied from the tech support guy I contacted at Ryobi:
The P100 is a 1.7 amp hr nicad battery 1.99 lb
The P101 is just a 2 pack of the P100 battery
The P102 is a 1.3 amp hr lithium battery. 1.15 lb
The P104 is a 2.4 amp hr lithium battery. 1.66 lb
The P103 is a 1.5 amp hr lithium battery. 1.15 lb
The P106 is just a 2 pack of the P103 battery.
The P107 is a 1.5 amp hr lithium battery 1.15 lb
The P105 is a 2.6 amp hr lithium battery 1.79 lb
The P108 is a 4.0 amp hr lithium battery 1.79 lb.
The P109 is a 2 pack of the P107 Battery 1.15 lb.
January 23, 2014
Rated 5 out of 5Â by detredwingsfan Work well, more power and longer life than NiCads.
I'm not sure why some people are having so many problems with their Ryobi Lithium batteries. I have 8 of all variety of Ryobi Lithium and every one works just fine. I use the Ryobi Lithium chargers and they recharge with no problem. The Ryobi Lithium batteries provide more power and last longer than even the best Ryobi NiCads that I have. They have turned some tools that were marginal on performance with NiCads into really useable tools. If you buy these Ryobi Lithium batteries, make sure you only charge them with the proper charger, never let them be completely discharged or that will ruin the battery.
January 2, 2014
Rated 5 out of 5Â by Superhaole A little LI Ion info
Most of the reviews That I read which were negative were about people who bought these twin packs to replace their existing ONE PLUS Ni Cad batteries. Assuming they used the existing Ni Cad charger for recharge there may be an incompatibility with the Li Ion batteries. Li Ion batteries do not like to be overcharged and should not stay on an old charger that is not specifically designed for a Li Ion battery. I purposely purchased the Battery/charger kit for my first Li Ion conversion for this specific reason. Ryobi/Home Depot should provide positive information relative to this Li Ion characteristic in both their WEB information and on in-store packaging. If used properly the ONE PLUS tools work great.
October 19, 2013
Rated 5 out of 5Â by goldeng26 Batteries are sufficient for around the house projects
My combo kit originally came with high capacity batteries and finally died after 4 years. Being the high caps are $100 each, I figured I try these first (2 for $100).
On a typical home project where I was using a standard drill (approx 3 hours), impact drill and a saw, these two batteries almost kept up, meaning with just the drills I could deplete one pack and have it charged before the other was depleted. Adding the saw in the mix with 10 cuts in 30 min, the batteries couldn't keep up (or I had to slow down). If I have a project where the saw is needed more than a few cuts, I'll likely buy a high capacity version to supplement these, but for 90-95% of my home projects, these are sufficient.
May 28, 2013
Rated 1 out of 5Â by Job38Four 5 Minute Battery
Had these P107 battery's for 3 months and worked good the first month on my p360 Ryobi Stapler, lasted about an hour, then I started a big job, and with in a week my stapler kept shutting down after only 3-5 minutes of work and use only 1 light bar. I swap them for one P102, and two P105 battery's, now I have no light bars, but they last a lot longer.
August 3, 2014