Rated 3.0 out of 5 by 158
Rated 5.0 out of 5.0 I picked up this sander as I had to sand the bottom side of an 18 foot boat, I found it worked very well and I was running 60 grit sandpaper with it and it ran super for 8 hours of sanding that day and it has been working great every day I have used it, I am very impressed with this sander and would recommend it to anyone looking for a sander, the dust collection also works quite well as I had to empty the bag quite a bit but like almost any sander there was still a good stream of dust leaving the sanding area, I am sure hooking up a vacuum would make a big difference but I was outdoors so did not care
June 15, 2010
Rated 4.0 out of 5.0 by NightWolf Could be lighter...
This is actually a decent sander and the dust bag does a great job of performing it's task. I purchased it as the Makita it replaces doesn't have a dust bag and I was looking for a tool that wasn't blowing dust into my face when it was in use. I have smaller hands & while the grip is pretty ergonomic, it was a stretch for my hands. I found the Makita fit my hand better and the Makita was also much lighter. It's still a good sander and has performed flawlessly anytime I grab it for a task
October 28, 2012
Rated 5.0 out of 5.0 by Pachuco What a great sander for the price
Now, keep in mind that this is the first Random Orbit Sander that I own or even try. I have to say, I am extremely impressed with this sander, I use it all the time now and can't imagine living without it anymore. The dust collection is pretty effective which was a surprise to me. Ryobi isn't typically the first manufacturer I look at when selecting tools, I sure am glad I did with this one though.
January 19, 2009
Rated 5.0 out of 5.0 by Panferno Handy little sander
Very impressed with this sander, especially for the price. The dust extraction system works very well and I like the weight and feel of the sander during use. It does seem like it goes through sanding discs quickly (they stop sticking to the sander long before the grit wears out) - but these discs are inexpensive to replace and so I'm not to worried about it.
September 11, 2008
Rated 2.0 out of 5.0 by Jamesatrj You get what you pay for
Tool is low cost and works reasonably well. For basic sanding, this is a great product. It is clean and does a good job. If you have light sanding work to do, this will do just fine. You need to be mindful of how much pressure you are applying to the item you are sanding.
Unfortunately, I had the same problem several other reviewers identified. The screw that holds the backing pad into the armature assembly is either low quality or insufficient designe to handle the torque generated if you put too much downward pressure on the sander. The armature continues to spin and the screw ends up stripped and the backing pad disconnects from the armature.
If you are trying to remove a couple layers of paint, this isn't the tool for that job. I suggest you spend more money and get something more robust. Either that or get yourself an ample supply of M4 x 10mm screws to replace the ones you are likely to burn through if you put too much pressure on the sander.
I've attached the picture of the schematic. The screw is item 21 and the armature is item 14. The screw is under a buck. the armature is $21. I haven't figured out if the armature is also stripped, or only the screw.
November 2, 2013
Rated 1.0 out of 5.0 by Nikkimerc Vibrates itself to pieces
I bought this sander less than a month ago. Granted I've put about 15 hours of work on it it is falling apart. It is extremely loose, and has lost its shaking motion that it had, now it just spins really fast.... Whatever.
DO NOT BUY THIS BRAND SANDER. When I bought this, I wondered why a Dewalt one cost almost twice as much.... Now I know. When I get paid on the first in going back to home Depot, and I'm going to get another sander (not ryobi). I'm not made of money, can anyone recommend a brand that will last at least 6 months or so
July 24, 2015
Rated 2.0 out of 5.0 by Adam Worked for about the first 10 times, then fell apart
Worked for a few times and then the sanding base fell off after about the tenth time I used it. All I have used it for is sanding tables. I tried to repair it multiple times, but it kept falling apart. Home Depot would not take it back because it had been more than 90 days. I am working with Ryobi under the 3 year warranty, but I know it is going to be a pain. I would not recommend this product.
July 26, 2015
Rated 4.0 out of 5.0 by humbledinghy Very good sander if you use it correctly
I have had two of these sanders now and believe I got more than my moneys worth out of each of them. Used correctly (don't push down excessively, don't run it on an edge ..ie keep it flat on the work, change the paper when worn so as not to kill the sander to save 40c on a disk), and blow it out or vacuum it out every hour or so and it will exceed the price you paid for it in terms of value. I have sanded several sailboat bottoms and topsides, numerous large woodworking projects and last fall I sanded the old stain off of all the cedar shake shingles on my entire house (2400 sq ft) and garage only now is the sander starting to sound like it has bearing problems. The first sander I left out in the rain and it was never right after that but it had worked countless hours prior to my carelessness. I just cant image what Festool or Fein might offer to make them worth 20 times the price.
January 31, 2015