Free Shipping and BOPIS


Model # RS290

Internet # 100599175

5 in. Random Orbit Sander

This item has been discontinued.
The Home Depot no longer carries this specific product.

Was   $39.97
$35.97 /each

Save $4.00 (10%) through 12/27/2015

Clearance - Limited Quantities While Supplies last
Promotion Details
Price Valid : 11/30/2015 - 12/27/2015
Clearance - Limited Quantities While Supplies last




Model # RS290

Internet # 100599175

Ryobi introduces the Ryobi 5 in. Random Orbit Sander. This tool features a powerful 2.6-Amp motor and 12,500 orbits per minute to deliver a smooth performance in a variety of sanding applications and an ergonomic design for comfort as you work. To learn more about Ryobi tools go to and check out Ryobi Nation. California residents: see Proposition 65 information.

California residents: see  Proposition 65 information

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Product Depth (in.) 
9 in 
Product Height (in.) 
7 in 
Product Width (in.) 
5 in 
Amperage (amps) 
Color Family 
Cord Length (ft.) 
Corded Tool Type 
Finishing Sander 
Dust collection type 
Maximum Speed (rpm) 
Power Tool Features 
No Additional Features 
Power Tool Product Type 
Product Weight (lb.) 
4 lb 
Random orbit 
Tools Product Type 
Power Tool 
Variable Speed 
Warranty / Certifications
Certifications and Listings 
1-UL Listed 
Manufacturer Warranty 
3 Year Warranty. 


Rated 3.0 out of 5 by 159 reviewers.
Rated 5.0 out of 5.0 I picked up this sander as I had to sand the bottom side of an 18 foot boat, I found it worked very well and I was running 60 grit sandpaper with it and it ran super for 8 hours of sanding that day and it has been working great every day I have used it, I am very impressed with this sander and would recommend it to anyone looking for a sander, the dust collection also works quite well as I had to empty the bag quite a bit but like almost any sander there was still a good stream of dust leaving the sanding area, I am sure hooking up a vacuum would make a big difference but I was outdoors so did not care June 15, 2010
Rated 4.0 out of 5.0 by Could be lighter... This is actually a decent sander and the dust bag does a great job of performing it's task. I purchased it as the Makita it replaces doesn't have a dust bag and I was looking for a tool that wasn't blowing dust into my face when it was in use. I have smaller hands & while the grip is pretty ergonomic, it was a stretch for my hands. I found the Makita fit my hand better and the Makita was also much lighter. It's still a good sander and has performed flawlessly anytime I grab it for a task October 28, 2012
Rated 5.0 out of 5.0 by What a great sander for the price Now, keep in mind that this is the first Random Orbit Sander that I own or even try. I have to say, I am extremely impressed with this sander, I use it all the time now and can't imagine living without it anymore. The dust collection is pretty effective which was a surprise to me. Ryobi isn't typically the first manufacturer I look at when selecting tools, I sure am glad I did with this one though. January 19, 2009
Rated 5.0 out of 5.0 by Handy little sander Very impressed with this sander, especially for the price. The dust extraction system works very well and I like the weight and feel of the sander during use. It does seem like it goes through sanding discs quickly (they stop sticking to the sander long before the grit wears out) - but these discs are inexpensive to replace and so I'm not to worried about it. September 11, 2008
Rated 2.0 out of 5.0 by You get what you pay for Tool is low cost and works reasonably well. For basic sanding, this is a great product. It is clean and does a good job. If you have light sanding work to do, this will do just fine. You need to be mindful of how much pressure you are applying to the item you are sanding. Unfortunately, I had the same problem several other reviewers identified. The screw that holds the backing pad into the armature assembly is either low quality or insufficient designe to handle the torque generated if you put too much downward pressure on the sander. The armature continues to spin and the screw ends up stripped and the backing pad disconnects from the armature. If you are trying to remove a couple layers of paint, this isn't the tool for that job. I suggest you spend more money and get something more robust. Either that or get yourself an ample supply of M4 x 10mm screws to replace the ones you are likely to burn through if you put too much pressure on the sander. I've attached the picture of the schematic. The screw is item 21 and the armature is item 14. The screw is under a buck. the armature is $21. I haven't figured out if the armature is also stripped, or only the screw. November 2, 2013
Rated 3.0 out of 5.0 by follow up So, I get a call one day from a guy at Ryobi tools. He had read my post on this site about the poor quality sander I bought, and wanted to make good on Ryobi tools, so he sent me another. I've been on some other projects but will get back to kitchen remodel soon and see if the sander spits out parts of the armature. But i will say good on Ryobi for reading comments and trying to do something about a problem, Thanks March 5, 2012
Rated 4.0 out of 5.0 by Very good sander if you use it correctly I have had two of these sanders now and believe I got more than my moneys worth out of each of them. Used correctly (don't push down excessively, don't run it on an edge keep it flat on the work, change the paper when worn so as not to kill the sander to save 40c on a disk), and blow it out or vacuum it out every hour or so and it will exceed the price you paid for it in terms of value. I have sanded several sailboat bottoms and topsides, numerous large woodworking projects and last fall I sanded the old stain off of all the cedar shake shingles on my entire house (2400 sq ft) and garage only now is the sander starting to sound like it has bearing problems. The first sander I left out in the rain and it was never right after that but it had worked countless hours prior to my carelessness. I just cant image what Festool or Fein might offer to make them worth 20 times the price. January 31, 2015
Rated 1.0 out of 5.0 by Fail after 20 minutes Poor quality, I'm not happy with this product.. something inside began to came apart and stop working... November 12, 2011
  • 2015-11-26 T12:13:56.273-06:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_159, tr_159
  • loc_en_US, sid_100599175, prod, sort_default
2 3 4 5  ... 7 >>