0033287165810

Ryobi

Model AR1650G

Internet #205193138

Store SKU #365113

Hex Shank Glass/Tile Bit Set (4-Piece)

$9.97 /each

Frequently Bought Together

Product Overview

The Ryobi 4-Piece Steel Glass and Tile Bit Set is a great choice for drilling through various thicknesses of glass and tile. The bits feature durable carbide tips for long bit life. Integrated Speed Load system. Includes 1/8 in., 3/16 in., 1/4 in. and 5/16 in. bits.

California residents: see   Proposition 65 information

  • Drills through glass and tile of varying thicknesses
  • High-speed steel construction
  • Spins at up to 350 RPM
  • Carbide tip

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

2 Questions5 Answers

Customer Questions & Answers

Hex Shank Glass/Tile Bit Set (4-Piece)
Hex Shank Glass/Tile Bit Set (4-Piece)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

Will these cut through a glass bottle?

This question is from Hex Shank Glass/Tile Bit Set (4-Piece)
Asked by
Baldwin, Maryland
Read all my Q&A
December 2, 2015
I am making a lamp out of a Belvedere bottle. i need to drill a hole at the bottom of the bottle. Will this cut through the glass without breaking the glass?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Mullica Hill, NJ
Read all my Q&A
April 26, 2016
Answer: 
Yes. I drilled into a Mason jar. Just put some painters tape down where you intend to drill and drill slowly so you don't overheat. Wear gloves in case you shatter accidently!
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
TEXAS
Read all my Q&A
Home Improvement Profile: DIYer
December 4, 2015
Answer: 
Yes you can. I just made a lamp out of an absolute bottle. Start out with smallest bit and go to largest. Try drilling in the side of bottle near the bottom that way the cord will not be under the edge of bottle. Good luck.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

December 3, 2015
Answer: 
Hi Nick, this most certainly can be used for that application. When doing cuts just be gentle and steady it will work just fine. Good Luck!
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
2 answers

What size are they

This question is from Hex Shank Glass/Tile Bit Set (4-Piece)
Asked by
Read all my Q&A
October 2, 2015
I would like to see the menu
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
Home Improvement Profile: DIYer
January 12, 2016
Answer: 
The bits come in 4 sizes: 1/8", 3/16", 1/4" and 5/16".
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

October 5, 2015
Answer: 
Hello David, The sizes of this bit set are as follows: 1/8, 3/16, 1/4, 5/16. Unfortunately, there is no menu for this bit set. Sorry for any inconvenience.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
1 of 1
  • 2016-08-24 T12:43:30.760-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_205193138, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 230ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 2.8 out of 5 by 23 reviewers.
Rated 2.0 out of 5.0 by 1 1/2 star For 1 it burns out to easily will not be recommending this product August 2, 2016
Rated 2.0 out of 5.0 by Tile and glass drill bits They did not last very long, cheap price short life. July 5, 2016
Rated 3.0 out of 5.0 by It's hard to drill thru tile, here take these. Notice the tiny warning on the back of the package "Not for ceramic tile". They still worked if I went slowly and didn't "twist" the bit. May 5, 2016
Rated 5.0 out of 5.0 by Nice bit set I needed to drill a hole in a glass jar for a small project. I selected a bit from the kit and it worked perfectly and did exactly what I needed to do with ease. I put a little "blue painter's tape" over the area I drilled prior to starting. No problems. Work safely and wear gloves! April 26, 2016
Rated 1.0 out of 5.0 by One time use only... if lucky. I tried to use these to drill a clay tile... what the manufacture recommends the product for clearly marked on the packaging. I did a test run using a scrap piece of tile. To keep the area wet I drilled through the tile with a sponge around the bit. I turned down the speed of the drill, started out slowly, and with pressure on the sponge kept the area wet. Test run went perfectly. The blade on the bit snapped as soon as I touched it to the next piece of tile; luckily I was able to get the hole drilled with the next size up. Next hole... the blade snapped as soon as I touched it to the tile... had to use the larger bit. Third hole... same result. Next step.. off to Lowe's to get a Diamond Arbored Hole Saw. This product cost twice as much but was worth the money. March 25, 2016
Rated 5.0 out of 5.0 by Works on Spring Steel I needed something with a very hard tip, as I had already burned up a couple regular drill bits, before I realized I was trying to drill into the extremely hard spring steel of a knife pocket clip I was modifying. I was just trying to open up a small hole in the thin spring steel, and the tapered point on these bits was perfect. Went slow and used cutting oil, got just the right sized hole I needed. February 25, 2015
Rated 3.0 out of 5.0 by Cut your glass bottles. Easy to use but don't force it. This bit can get hot and break. That will break the bottle. Start with the smallest and work up to the size you want. February 3, 2015
Rated 5.0 out of 5.0 by Ryobi Glass and Tile Bits #AR1650G Faster Than Bosch Ryobi vs Bosch Glass & Tile Drill Bits, Ryobi Faster I wanted to drill holes in some ceramic flower pots, and my multipurpose drill bits could not get the job done. On February 8, 2015, I bought a 1/2 inch Bosch Glass & Tile� drill bit and a 4-piece set of Ryobi Glass and Tile drill bits #AR1650G ranging from 1/8 inch to 5/16 inch. I started with the smaller Ryobi bits and they zipped right through the first ceramic pot. I used the Bosch drill bit to enlarge the holes, and it seemed to take much longer. I then tested each drill bit to see how long it took to get through another ceramic pot. The 2nd pot had a thick glazed bottom and took longer. The times to drill through the 2nd Ceramic Pot: Ryobi 1/8 inch bit: 40 seconds. Ryobi 3/16 inch bit: 50 seconds Ryobi 1/4 inch bit: 65 seconds Ryobi 5/16 inch bit: 70 seconds Bosch 1/2 inch bit: 170 seconds I then used a terracotta pot with 4 sides. Each of the Ryobi bits drilled through the pot in 5 seconds or less. The Bosch 1/2 inch bit took 35 seconds to drill through the pot. Both brands got the job done, but all the Ryobi bits did it in such a small fraction of the time it took Bosch, that I have to believe their better performance is related more to their design than to the larger size of that particular Bosch item. I know the drill bit brands would need to be the same sizes for an objective comparison, but I am going to try some other brands of 1/2 inch drill bits for glass and tile before I buy another Bosch. I would buy a Ryobi 1/2 inch drill bit for glass and tile if they made one. February 23, 2015
  • 2016-08-20 T11:46:02.903-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_23, tr_23
  • loc_en_US, sid_205193138, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 123ms
  • REVIEWS, PRODUCT