Model # P600

Internet #100342147

Ryobi ONE+ 18-Volt 1/4 in. Cordless Trim Router (Tool Only)

Discontinued Ryobi

ONE+ 18-Volt 1/4 in. Cordless Trim Router (Tool Only)

  • Over 50 great ONE+ tools work with the same 18V battery platform
  • Any 18V ONE+ blue or green tool works with any 18V ONE+ battery
  • Up to 29,000 RPMs enable fast and efficient decorative trimming

Frequently Bought Together

Product Overview

Create the perfect edge with the correct router bit and optional woodworking base of the Ryobi 18-Volt ONE+ 1/4 in. Cordless Trim Router. With 29,000 RPM, you can trim quickly and efficiently. The router features a compact design for laminate trimming.

California residents: see   Proposition 65 information

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Compare Similar

$49.97 /each
Was $89.09
$84.00 /each
Save $5.09 (6%)
$89.99 /each
$108.99 /each
Name ONE+ 18-Volt 1/4 in. Cordless Trim Router (Tool Only) 4.5 Amp Single Speed 1/4 in. Laminate Trimmer 5.9 Amp Corded Electric 1-5/16 in. 1 Horse Power Single-Speed Colt Palm Router 4 Amp 1/4 in. Fixed Base Laminate Trimmer
Brand Ryobi Porter-Cable Bosch Makita
Ratings (97) (9) (17) (1)
Router Base Type Fixed Fixed Fixed Fixed
Collet size (in.) .25 .25 0.25 .25
Amperage (amps) 0 4.5 5.6 4
Reconditioned No No No No
Multiple base No No No No
Depth Adjustment Yes Yes Yes Yes
View Product View Product View Product View Product




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Adjustable for detailing?

Has any used (or does anyone know) if this router can be used for detailing? Maybe to cut grooves into wood or ideally rout out lettering on a face plate? Not sure if it can be adjusted short enough. Just curious. . . Thanks!
Asked by: Brian
Hi Brian. The trim router should be great for detailing. Hope this helps!
Answered by: Ryobi Tools Team
Date published: 2016-01-12

Router Question?

What is the thickest piece of wood can this cut?
Asked by: Jerry
This is a great little tool, but remember that this is a battery-powered router. You may get the maximum depth on soft pine but hard woods can force the motor to labor, and affect the quality of your edges. If you typically work with hard woods, you will need to do some practice runs on scraps of wood. You will also want to be more conscious of the quality of your bits with a battery-powered router.
Answered by: AtlantaDan
Date published: 2015-12-18

Is there a table that this router can be attached to for better use??

Asked by: Spence
Hi Spence, Thank you for your question. No this router does not come wih an additional table. That needs to be bought seperatley.
Answered by: Sushma
Date published: 2015-11-04

Is there a newer model available?

I saw a video on YouTube from Ryobi that showed this as a green router. The same color as all the new tools. The model that HD is the old blue model. Is the newer model different and when will it be available?
Asked by: Chuck
No, but opt for the lithium batteries.
Answered by: JeryJer
Date published: 2015-11-07

What edge guide will work with the Ryobi p600 cordless router/laminate trimmer? Also, do you need the woodworking base to use the edge guide?

Asked by: Vanman
There's an edge guide available as a separate purchase. Home Depot carries this guide, I believe. On the packaging, it will list the model numbers it can be used for. I don't believe you'll need the other base, which I've never seen. My edge guide snaps in place, but I've used it only once because I have bits with the guide wheel that I mostly use.
Answered by: renovationist
Date published: 2015-10-09

rabbet cut

could I make a simple rabbet cut with this?
Asked by: JG
Hi JG. When used with the optional woodworking sub-base with handles, this tool may be used for the following light-duty applications: Routing grooves and shaping edges in wood, Chamfering, rabbeting, dadoing, and dovetailing in wood, and Routing edges on plastic laminates. Hope this helps!
Answered by: Ryobi Tools Team
Date published: 2016-01-24

way do you stop making. 18 v cordless trim router and were can i get one?

Asked by: freddy
Hi Freddy, this item has been discontinued and is no longer available for purchase on This item has been discontinued by the manufacturer and is not sold in any Home Depot store. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!
Answered by: THDSupport
Date published: 2016-05-15

Where can I get the woodworking subbase

I'm looking to find the sub base and two handles, If I can locate or figure out how to get those I will purchase the router.
Asked by: Stephen
Ryobi tools you responded a month ago to another question about rabbit regarding the optional base with handles ? It's not availble now ? Your answers are contradicting
Answered by: Stephen
Date published: 2016-01-19
  • y_2017, m_2, d_16, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_, sid_100342147, prod, sort_[]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 57ms

Customer Reviews

ONE+ 18-Volt 1/4 in. Cordless Trim Router (Tool Only) is rated 4.6 out of 5 by 97.
Rated 5 out of 5 by from great for door hinges I picked up this little guy about 5 years ago to speed up door hinge preparation. I figured it would be quicker than using a chisel, but I had very low expectations. Was I ever wrong. I, and several co workers have routed hundreds of door hinges, and several laminate garden window sills over the last 5 years with absolutely no problems whatsoever. I even used a plunge bit to router out a piece of 3/4 inch plywood for the battery tray on my pontoon boat. My advice to anyone considering it is patient and take your time, use the lithium batteries, and spend the money on quality bits. I personally use Diablo and have had no issues.
Date published: 2013-11-10
Rated 5 out of 5 by from "One+" of the best Ryobi tools they make! Great trimmer... AWESOME router if you add base/handles. This trimmer is compatible with the base & handles sold as replacement parts for the plug-in trimmer. You can find them on power tool parts stores... depending on shipping you can get the base plus two handles for under $30. Once you add them it is a fantastic portable router and (in my view) much more capable/usable than without the modification. Photo added of my modified trimmer. Only minor negative is the switch...a bit unwieldy to turn on/off when using as router.
Date published: 2014-12-21
Rated 5 out of 5 by from Great 'little tool' I use this tool almost daily, my last one was six years old, brushes and bearing worn out, still screaming, using to cut out for hinges and door latches, I was really disappointed it wasn't available when I wanted it, I talked to Ryobi rep and Pro desk to help, tried to drop an email to Ryobi, no luck, but luck changed, it came available, and I ordered two, just in case it happened again. I would be lost with out this tool, I have electric router but I became spoiled by this little tool doing the big jobs from trim, laminate, and doors. The best little tool I ever found, thanks again!
Date published: 2013-04-05
Rated 4 out of 5 by from Mini-Router I bought this tool for some light routing on oak. I was concerned about it having enough power to cut oak, but it performed very well and produced nice results. I used three of the Ryobi bits from the $40 small set, and they all performed very well. I did encounter one issue, and anyone attempting this needs to be aware of this. To install the optional sub-base with handles, you have to remove the smaller square sub-base that comes on this tool. The screws that hold it on, are very tight, and appear to be installed with thread locker. I stripped out the head of one of the screws and could not remove it. I re-installed the three screws removed, and can only use this small base as is. To use the larger base I have ordered a second complete base and collar assembly to install the larger base on. I hope I will be able to remove the four screws on the new base assembly. These screws should not be installed with Loctite, if you need to remove them to change bases. Other than this issue, the tool performed very well for my use.
Date published: 2007-01-01
Rated 5 out of 5 by from Power of a plug-in Purchased one about 5 yrs. ago and still going strong. Even better now with the lithium batteries. I made all the baseboards for my home using it, and while doing so, a professional home builder watched me use it, and was amazed at how it powered through 1/2 in. yellow pine. Easy to use and guide when using roller bearing tipped bits. Just clamp down the material to be routed, and have at it! Purchased a second unit so that if the first one dies, I'll have a back-up.
Date published: 2012-11-07
Rated 5 out of 5 by from perfect little router This is my second one. The first one lasted ten years with almost daily use, so I cannot complain about the life span at all. What other tool can you buy for around $50 that will last ten solid years? Has plenty of power with a fully charged battery, bits are easy to change, and it fits my hand perfectly.
Date published: 2014-04-25
Rated 5 out of 5 by from Another Great Ryobi Product First time using this type of router to trim laminate while redoing my kitchen countertops. Easy to use, long battery life with my lithium ryobi battery, and great results. Smaller size let me get very close to the walls since I was relaminating the counters in place and only had small areas to trim by hand. Bought a 3 piece laminate bit set that made the edges look professional. On/off switch could have better placement, but not a big deal. Height adjustment base opening directs debris where you want. Would be nice not to remove base to remove bits, though. As with all power tools, wear hearing and eye protection and a mask.
Date published: 2015-01-27
Rated 5 out of 5 by from Works well for battery powered tool It was very easy to add decorative trim cut to a piece of furniture I am building. Only drawback is that large router bits, 1 1/2" or bigger, will not fit with the alignment collar on.
Date published: 2014-10-29
  • y_2017, m_2, d_16, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_97
  • loc_, sid_100342147, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 68ms