Rated 4.4 out of 5 by 49
Rated 5.0 out of 5.0 by Bob This tool has changed the way I work.
Now I only need one driver on my belt. The quick connect and disconnect without adding excessive length to the drill is amazing. The bits engage and hold firm and are also easy to remove when changing bits. The larger shank gives the bit holder a better grip in the drill jaw than the standard size bits, which saves having to re-tighten the bits periodically. Great accessory and long overdue.
August 13, 2015
Rated 2.0 out of 5.0 by ryobi4theloss A little disappointed
The speedload system seemed like a great feature, but the bits do not fit as tight as they should. As a result, there's a great deal of wobble at the tip of the bit when spinning. This leads to inaccurate holes and will probably make you break the bits.
The hex design of the bits does a great job of preventing the bit to slip in a regular drill chuck. However, there is a small groove in the hex part of the bits that will cause them to sit crooked in the chuck. This is avoidable, you just have to pay attention when you putting them in.
You would be better of just buying regular bits (or regular hex bits if you think you need the extra grip). The speed loader is just a disappointment and will not give you the accuracy and stability you want while drilling.
August 19, 2013
Rated 4.0 out of 5.0 by mercury24 Speedload system is great, Fits most drills
I was pretty confused when I bought this kit. I wasn't sure if it fits drills other than Ryobi. I'm not very knowledgeable about tools and home improvement, but I did want a basic drill and a kit that would get me through most basic jobs.
This kit provides me with a very easy solution to changing bits for my drill. The Speedload adapter fits most drill chucks and will hold securely. Changing the bits are extremely easy, just push the bit in, and pull the Speedload top to eject the bit. Very simple.
A good moderate selection of bits. Good enough for any homeowner.
I would recommend this product to anyone. Its definitely a great addition to any toolkit.
December 14, 2010
Rated 5.0 out of 5.0 by Maimon Value and usage for price is exceptional.
I found that Home Depot is bar none when it comes to whatever a builder needs. I am a female amatuer and require an organ transplant. Needless to say with my Home Depot account I was able to purchase all materials for this project which included nails, lumber, screws, solar light posts, a Royobi saw, drill and bits. As you can view from the results the job came out very nice. I have completed all projects which add and increase value in the community. The compliments have not ceased especially when they see a female did the work. I am not finished the project and will not hesitate to come back to the depot for all of my building needs. Hope all the viewers like the work and be encouraged to become a DIYer. Had a lot of fun. Thank you Home Depot for your products meeting and exceeding all of my building expectations. I will be back again!!!!
December 13, 2013
Rated 5.0 out of 5.0 by Preferido Great deal, excellent quality
Great deal, excellent quality it tales a pounding and it keeps going. I would definitely recommend this item.
March 25, 2015
Rated 5.0 out of 5.0 by pikaziotype A little bit like alot of others, but very handy!!
There is no escaping the fact that there are a lot of look alikes and similar ideas on the market right now, but i took the chance and decided to purchase this set. It turned out to be a very good choice. The set is a fine arrangement of very useful things that i have used many times, and nearly all of the parts have come in handy for different tasks. I definitely love the 3/8" drive attachment for using sockets, and the nut drivers are superb (they also have magnets that hold the nut/bolt and washers if you have them). i personally do not use the carbide tipped masonry drills, but the standard drills are very nice. The sharp titanium nitride coated drills cut right through wood and plastic and leave a nice crisp hole. However as has been stated in another review (and i would agree), that they are probably not for heavy duty use or hard metal drilling.
the speedload chuck is another fantastic feature and it comes in very handy when you are drilling and driving due to the ability to change from drill to drive bits.
overall this is a great product at a very low price (compared to its competitors)
hope this helps!!
May 6, 2010
Rated 2.0 out of 5.0 by hopefulpoet Not what was expected
I bought these to supplement my new Ryobi 18v drill. While the bits fit easily into the driver without issue, they are very dull. When I attempt to drill into common stock (Pine), I have to apply a great deal of pressure to even minimally pierce the surface. The Ryobi drill bit that came stock with my 9v drill was much better than these ones.
February 10, 2015
Rated 4.0 out of 5.0 by MWB62 Perfect size kit
The size of the kit will fit easily in an 18" tool box filled with extra tools.
December 10, 2014