Rated 3.8 out of 5 by 20
Rated 1.0 out of 5.0 by Kpg0628 Terrible pump!!
Terrible pump. Didn't work and won't secure properly with the flimsy soft mounting suction cups. I usually buy Ryobi given their quality and value. This was a huge disappointment!!
August 23, 2016
Rated 4.0 out of 5.0 by bigdog tile pump
all i needed was the 45 hose attachment on top of the pump that connects to the hose. You have your saw all hooked up ready to cut tile and there is a crack in the 45. no parts at the store and who wants to wait for online delivery
July 21, 2016
Rated 5.0 out of 5.0 by Ryon Ryobi Universal Water Pump
They made a wonderful change to this pump. I was simply reinstalling the hose back on the pump and the tip broke. The tip can now be removed and replaced instead of the whole pump needing replaced.
April 13, 2016
Rated 4.0 out of 5.0 by Ryno Small Pump Big Results
The pump was easily installed and worked excellent.
March 15, 2016
Rated 3.0 out of 5.0 by Pumper Low price, but low flow and head
I wasn't expecting much from this low cost pump and that's what I got. Head height with 1/4" ID tube was ~3 ft. Once I filled the tube with water the weight of the returning water helped it work, but the flow was minimal.
October 8, 2013
Rated 4.0 out of 5.0 by AHService It works
Needed a new pump and did not want to spend $$$ on a new one as this is a back up brick/tile wet saw. Grab this one thinking if it does not work I'm not out much. It did the job fine. Actually had to turn down the flow rate. Good little pump.
April 14, 2015
Rated 4.0 out of 5.0 by TilemanNat1 pump works well and stays put
I bought this pump because the external hose fitting on my Ryobi tile saw broke(cheap plastic.) The pump does it's job of recirculating water to wet the saw blade and seems to provide adequate flow. It is compact and has suction cup feet to keep it a special spot in the tile saw tub. My only complaint is that the instructions are not clear on how to remove the cover to access the filter. It should slide off and clip back on but when I tried, I met enough resistance that I decided to wait until I really need to clean the filter because it feels like it might break(like cheap plastic) if I have to pry it off.
June 12, 2012
Rated 5.0 out of 5.0 by Dave Working fine so far
Have used this pump on my Ryobi wet saw for a few months now with no issues. Flow is fine for 7" saw.
April 8, 2015