Rated 4.7 out of 5 by 28
Rated 5.0 out of 5.0 by 41913 Light weight skilsaw
Best Handsaw I've used so far and the Diablo blade works great
September 20, 2016
Rated 1.0 out of 5.0 by Carpenterwithskills Worst purchase ever!!
This is the biggest pile of junk I have ever had the misfortune of purchasing from Skil. I've pretty much used skil worms for the last 30 plus years and never ever have I had a saw last self distruct in less than two months. I will say that I've never owned a made in China Skil product either until now. This will be my first and last. While I was dropping it off at the service center for service, i was informed that this was the second one he'd seen in two weeks. Never even got around to changing out the blade.
Saw was treated in the very same manner that my old 20 year old 77's had been.
Pictures tell the story.
October 10, 2015
Rated 5.0 out of 5.0 by Sawdust7 Great saw so far!
I hate to review this so early, I've only had the saw for a month or so, but I have used it pretty heavily in that time. The saw is great! It is comfortable in hand and cuts very well. For some reason circular saws are one of those tools that it can take a little while to get comfortable with, I was able to just pick this one up and go. Visibility to the cut line is great, it does not have as big a jump when you first pull the trigger as the Rigid it is replacing. Cutting treated 2x material for decks is no sweat with this beast!
July 26, 2016
Rated 1.0 out of 5.0 by Ricco GOOD IDEA - POORLY EXECUTED
I have owned 7 different Skil and Bosch wormdrives (Bosch has owned Skil for a long time. I have also used dozens of company Skil saws. This saw is horrible. The armature/commutator warped on the first day, which stressed out the bearings. Now it is fairly loud (bearings) and vibrates (armature). Vibration gets worse with heat build up. - I build stairs daily wtih my tools. SO ! the Chinese sourcing of parts and labor is/has ruined Bosch/Skil. My old saws were all USA made and bullet proof. This saw had problems after day one. An employer was given one by his "supplier" and stated the same thing. Vibrateing and noisy at the end of day one. ...Yes I changed the oil at the end of day one and twice since then... So the saw is getting returned this week....I did like the few ounces lighter than my 1677M. The higher motor speed is great. However the chinese suppliers and assembly need to be changed.
July 12, 2016
Rated 5.0 out of 5.0 by aki74 Great saw
I've always wanted a worm drive saw and finally had the opportunity to buy one. I'd always known that Skil was a good product from helping my grandfather and dad when I was young. I'm not a carpenter by trade, but they were. This saw is awesome. I have a few framing projects in the works, and I know this will last me a lifetime. I've read a review that stated the saw burned up, didn't last, etc.(must have been cutting steel) Let the saw do the work, don't force it. It won't disappoint!
May 10, 2016
Rated 5.0 out of 5.0 by mixmox Gutsy!
This is a great saw with 15 Amperes of power. You feel the torque twist the machine as it starts!
The first thing I noticed when unpacking this saw is the really nice thin kerf blade that comes with it. (A Diablo general purpose blade).
The size of sole has been well thought out, 1½” from the blade on one side and 3½” on the other.
The cable seems to be very heavy duty - important for its powerful motor.
A very nice touch is that the depth adjustment has present marks for various typical thickness cuts (such as 2x lumber etc.). No tools are needed to change the depth or angle.
The supplied tool that is used for changing the blade has a place on the machine so one should always have it handy when needed.
My first job required some plunge cuts and it handled them with ease.
The saw does not stand up by itself (blade down), so I found I had to learn to lay it on its side. The saw is light to handle. I am used to the blade being on the right of the machine but I quickly got used to the blade being on the left, which works well for a right handed person. The left side blade does allow better visibility of the cut.
There is no laser line which may have been nice but certainly not critical. Instead there is a white marker on the leading edge of the sole that shows where the cut will be.
There is a nice big solid hook that folks out which allows the machine to be hung on a ladder rung or 2x lumber.
This is the first saw that I own that takes oil. This is because it has a worm-drive. I do not expect that I will have to top that up too often.
May 29, 2014
Rated 5.0 out of 5.0 by joelav22 The undisputed king of the worm drive went on a diet and got lean
I do a lot of fine woodworking. Generally circular saws don't have much place in fine woodworking - especially large, heavy worm drive saws. However nothing beats one of these for breaking down sheet goods to manageable sizes. I can stack plywood two 3/4" sheets deep and make a full 8' rip without so much as a whimper from this saw. Plus the weight is a benefit here. It cuts down on vibration and makes it really easy to track a straight edge. This saw in particular is something special:
Pros - The sole is actually flat! This is been a major point of contention among worm drive saws in the 70+ years they have been around. I expected some work removing the sole and flattening it on a granite reference surface, but I didn't need to.
The adjustments are wonderful and accurate. Very easy to read, everything locks and unlocks smoothly and everything moves as it should. This is something I am not accustomed to on a circular saw of any type. Both the bevel angle and max cut depth adjusters can be fined tuned which is often necessary with wear and tear. I was really glad to see this
Power. If you are looking at worm drive saws, you already realize they are very powerful. However this not only powerful, but smooth. There is the tell tale torque twist when you first squeeze that trigger, but after that is very smooth.
The included blade is actually nice! I am accustomed to not even installing the blade that comes with saws. Generally they are very low quality. This one is nice. I still purchase additional blades because I need a higher tooth count for my intended use, however for general construction in dry, nail free wood this blade is all you need.
The ergonomics are great
Can't really think of any. As a lefty, this saw is a little awkward until you get used to it, but that is the nature of any worm drive. It is on the heavy side for a circular saw, but very light for a worm drive saw.
Also be aware this saw requires maintenance. Especially oil and oil changes. If you want this saw to last, the oil should be changed after the first 10 hours of use, or within the first 3 months. As all of the gearing wears in some metal is shed and it's important to get it all out. Also if you ever overheat the saw, (common when cutting a lot of thick wet wood) change the oil.
This saw has it all. Truly a 5 star performer.
This is "the saw that built america". The performance is still as legendary as it was 70 years ago. It just got a lot lighter and easier to handle. This is a saw that my son will use with pride in 20 years
June 13, 2014
Rated 5.0 out of 5.0 by nebraskabuilder great saw
Have used many skil77's. This one does not disappoint. Also like the diablo blade that comes with it
March 1, 2016