0026613117362

Model CSSD44E-36 X

Internet #100634423

Store SKU #694329

Safety+PLUS 1/2 in. MIP Excess Flow Valve x 1/2 in. MIP x 36 in. Stainless Steel Gas Connector 1/2 in. O.D. (71,100 BTU)

$26.35 /each

Frequently Bought Together

Product Overview

BrassCraft’s Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Our stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

California residents: see   Proposition 65 information

  • 3/8 in. I.D. (1/2 in. O.D.) corrugated stainless steel with corrosion resistant coating
  • Safety+PLUS excess flow valve protects against gas fires and explosions - 1/2 in. MIP connection to gas supply or gas ball valve
  • Safety+PLUS valve ideal for most common household gas appliances
  • Safety+PLUS valve features automatic activation and reset
  • Safety+PLUS valve is 100% factory performance tested
  • Safety+PLUS valve installs like a standard gas fitting; can be installed in vertical or horizontal position
  • ProCoat coating corrosion resistant to harsh chemicals as well as UV rays and salt
  • Use with natural and LP (propane) gases
  • Gas connector is 100% leak tested
  • Approved for indoor and outdoor use
  • Temperature rating: 32° F to 150° F
  • Pressure rating: 1/2 psi maximum
  • Designed, machined and assembled in the USA
  • CSA certified

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

2 Questions1 Answer

Customer Questions & Answers

Safety+PLUS 1/2 in. MIP Excess Flow Valve x 1/2 in. MIP x 36 in. Stainless Steel Gas Connector 1/2 in. O.D. (71,100 BTU)
Safety+PLUS 1/2 in. MIP Excess Flow Valve x 1/2 in. MIP x 36 in. Stainless Steel Gas Connector 1/2 in. O.D. (71,100 BTU)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

Does this work with both natural gas and propane?

This question is from Safety+PLUS 1/2 in. MIP Excess Flow Valve x 1/2 in. MIP x 36 in. Stainless Steel Gas Connector 1/2 in. O.D. (71,100 BTU)
Asked by
Hickory, North Carolina
Read all my Q&A
October 17, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

October 19, 2015
Answer: 
Dear Curious - This connector is approved for use in natural gas or propane piping systems. The BTU rating (71,100) shown is for natural gas. If using with a LP gas system, the BTU rating is 113,760 BTU/hr. Should you have any additional questions please feel free to contact our product team toll-free at 877-272-7755. Have a great day.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
0 answers

Does this prodcut meet code in Massachusetts?

This question is from Safety+PLUS 1/2 in. MIP Excess Flow Valve x 1/2 in. MIP x 36 in. Stainless Steel Gas Connector 1/2 in. O.D. (71,100 BTU)
Asked by
Bridgewater
Read all my Q&A
April 18, 2016
I have found that many people think this product is legal and others who think it is not, but neither have shown to what regulation it is accepted/declined. Is there a specific chapter in CMR that certifies that fact that myself and others can refer to?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-08-27 T13:30:40.062-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100634423, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 179ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 5.0 out of 5 by 1 reviewer.
Rated 5.0 out of 5.0 by Just right It installed nicely and was just what we needed for our tankless water heater December 6, 2011
  • 2016-08-25 T13:17:17.593-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_100634423, prod, sort_default
1-1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 274ms
  • REVIEWS, PRODUCT