Model # 577278

Internet #100097501

Store SKU #577278

null Sanded Plywood (FSC Certified) (Common: 15/32 in. x 4 ft. x 8 ft.; Actual: 0.451 in. x 48 in. x 96 in.)
0053608006660

Sanded Plywood (FSC Certified) (Common: 15/32 in. x 4 ft. x 8 ft.; Actual: 0.451 in. x 48 in. x 96 in.)

Frequently Bought Together

Product Overview

This is an appearance panel with a satin-smooth sanded face that is ideal for interior and exterior applications. Is often used where a combination of strength, stiffness and appearance are needed such as soffits, porch ceilings, cabinets, built-ins, shelving, utility trailers, yard art and hobbies. Wood components are from FSC managed timberlands. These thin sheets of wood (veneer) in alternating wood grain directions, which increases the strength and stiffness of our finished panels. Can be cut, drilled, routed, glued, fastened and finished with ordinary tools. Excellent nail, screw, and staple holding ability allows placement near panel edges without splits.

California residents: see   Proposition 65 information

  • Adhesive used is no added urea formaldehyde (NAUF) exterior, fully water resistant phenolic glue
  • Every piece meets the highest grading standards for strength and appearance. Cross-laminated construction provides superior dimensional stability (resistance to warping). Resistant to splitting, puncturing and impact damage these panels are durable
  • Can be cut, drilled, routed, glued, fastened and finished with ordinary tools. Excellent nail, screw, and staple holding ability allows placement near panel edges without splits
  • Little or no additional sanding is required for most uses
  • Excellent nail, screw, and staple holding ability allows placement near panel edges without splits
  • Click to learn how to select the right lumber for your project

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

3 Questions4 Answers

Customer Questions & Answers

Sanded Plywood (FSC Certified) (Common: 15/32 in. x 4 ft. x 8 ft.; Actual: 0.451 in. x 48 in. x 96 in.)
Sanded Plywood (FSC Certified) (Common: 15/32 in. x 4 ft. x 8 ft.; Actual: 0.451 in. x 48 in. x 96 in.)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

What grade is this? Can it be used as floor underlayment?

This question is from Sanded Plywood (FSC Certified) (Common: 15/32 in. x 4 ft. x 8 ft.; Actual: 0.451 in. x 48 in. x 96 in.)
Asked by
Read all my Q&A
December 19, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Fairbanks, AK
Read all my Q&A
Home Improvement Profile: Professional
March 11, 2015
Answer: 
There are too many voids in this to be use as a underlayment.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Chicago Illinois
Read all my Q&A
December 30, 2014
Answer: 
Hello remodeler,
Usually 3/4 or (23/32) tough and groove plywood is used for under layment. This thickness is necessary for nailing hardwood flooring and to be ridged enough for most flooring surfaces.
Charlotte
-3points
0out of 3found this answer helpful.
Was this helpful?helpful0unhelpful3
 
2 answers

Can this be cut down to 78 in L x 42 in W in store?

This question is from Sanded Plywood (FSC Certified) (Common: 15/32 in. x 4 ft. x 8 ft.; Actual: 0.451 in. x 48 in. x 96 in.)
Asked by
Read all my Q&A
October 30, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Fairbanks, AK
Read all my Q&A
Home Improvement Profile: Professional
March 11, 2015
Answer: 
I think this depends on your store location but most Home Depot stores offer a cutting service.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
South Orange County, CA
Read all my Q&A
December 12, 2014
Answer: 
Yes. Sometimes they charge a small amount for more than one or two cuts, but usually they don't.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
0 answers

is this kind of wood good for installing air conditioner?

This question is from Sanded Plywood (FSC Certified) (Common: 15/32 in. x 4 ft. x 8 ft.; Actual: 0.451 in. x 48 in. x 96 in.)
Asked by
Honolulu, HI
Read all my Q&A
April 18, 2016
i know i gotta use 2x4 too
but for the top and sides....?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-10-31 T01:24:08.343-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100097501, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 87ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.4 out of 5 by 5 reviewers.
Rated 4.0 out of 5.0 by It works. Could be better One side is clean and smooth, the other has a lot of knots. The two inside plies are similar to the ugly side. Expect all the sheets to come off the pile pretty warped even though they look flat. If you're making cabinets you might want to go up to birch or oak, this is just like sheathing with a presentable side. May 7, 2016
Rated 2.0 out of 5.0 by Not as water resistant as they claim I picked up the plywood in the evening and couldn't put it anywhere until the morning, so I left it in the back of the truck. It was foggy that night, so everything was damp in the morning. It's exterior grade, so it should have been fine... Well, in the morning there were a couple areas starting to bubble. I primed it with Killz, and the next day there were several more bubbles and heavily warped. Not impressed. February 20, 2016
Rated 5.0 out of 5.0 by Nice quality I'm replacing the back panels on some guitar speakers cabinets to convert them to closed-back. I usually use Baltic Birch for speaker cabinets but started wondering if it was really worth the cost. There are a few small voids in the center of there are very few. The smooth side is perfect for bonding tolex. The layers seem to be bonded securely because there is minimal splintering when cut. For 1/4 the price of Baltic Birch and availability I like it a lot. Home Depot cuts for free too so you can take it home in your car. October 1, 2014
Rated 1.0 out of 5.0 by horrible quality I've been involved in woodworking for over forty years, although I no longer do it professionally. I do remember a time or you could buy AC Plywood and build some pretty nice cabinets. The face veneers on most of these panels really look horrible and require filling before you could paint, let alone stain. I found that once I cut into these panels I find huge voids, some as long as 5 or 6 inches, and many many smaller voids, which makes using power tools like routers with pilots impossible. Trying to use fasteners like bisquits or pocket screws can be very aggravating, as the edges of the plywood fall apart. You never know when you're going to hit a void. I can also say that once you cut these panels into smaller strips, good luck on keeping anything flat. Even in small 15 x 30 panels I cut up, there was a good half of an inch bow to the board. If there's not something to flatten this stuff out, you've got problems. At the very least it makes assembling things a problem as you're fighting tension in the wood. I easily spend a couple extra hours filling and sanding one panel to make something that look presentable. Truly horrible quality stuff that I would not recommend to anyone. I would say it's well worth the extra money to get yourself a good sheet of birch plywood or Baltic Birch. The hardwood panels sold in store seem to be of much better quality, but generally do not come as thin as 1/2". Sad part is there's really not much of an alternative to these panels short of particle board. March 11, 2015
Rated 5.0 out of 5.0 by Worked great Plywood made repairs to the bathroom easy and very professional looking. Thw wood preparations made painting simple. July 1, 2014
  • 2016-10-30 T23:51:14.092-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_5, tr_5
  • loc_en_US, sid_100097501, prod, sort_default
1-5 of 5
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 90ms
  • REVIEWS, PRODUCT