0043156771059

Schlage

Model F10 FLA 619

Internet #100076495

Flair Satin Nickel Hall and Closet Lever

$28.06 /each
  • Self-aligning screw holes make installation easy & hassle-free
  • Works with right and left swing doors
  • Fixture and finish backed by lifetime limited warranty
Finish: Satin Nickel
  • Aged Bronze
  • Antique Brass
  • Bright Brass
  • Bright Chrome
  • Oil Rubbed Bronze
  • Satin Nickel

Frequently Bought Together

Product Overview

The Schlage Flair Satin Nickel Hall and Closet Lever is perfect for use on attic, basement, hallway and closet doors where locking is not needed. Designed with reversible handles for versatile use, it's also a handy device for unlatching entry doors when your hands are full. The elegant passage lever’s ornate details are reminiscent of a paper scroll, particularly stylish when wrapped in our versatile Satin Nickel finish. Plus, it’s been designed and tested with strength and durability in mind, protected by a lifetime limited warranty for decades of dependable use.

  • Guaranteed to fit on existing, standard pre-drilled doors
  • Use with 1-3/8 in. to 1-3/4 in. door thickness
  • Always unlocked for ease of entry
  • Lever design pairs well with traditional styles like high-backed formal chairs
  • Finish coordinates easily with satin nickel plumbing and lighting fixtures
  • Universal latches slide easily into place and require no tools or manual adjustments
  • Easy installation with Phillips screwdriver (sold separately)
  • Mounting hardware included
  • Available in other finishes
  • Don't forget your door stops and wall protectors

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

10 Questions12 Answers

Customer Questions & Answers

Flair Satin Nickel Hall and Closet Lever
Flair Satin Nickel Hall and Closet Lever

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

Locking

This question is from Flair Antique Brass Hall and Closet Lever
Asked by
Longwood, Florida
Read all my Q&A
January 29, 2016
What is the product number for a locking bedroom that matches F10FLA609?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

February 5, 2016
Answer: 
This model # would be F40 FLA 609
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
1 answer

No Lock

This question is from Flair Antique Brass Hall and Closet Lever
Asked by
Longwood, Florida
Read all my Q&A
January 29, 2016
Is there a product, without the ability to lock, for left hand doors that matches Model #F10FLA609, Internet#100057641, Store #234048?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

February 5, 2016
Answer: 
The only other product without the ability to lock is a dummy (single trim) it does not require a bore hole and screws directly into the door. The F10 passage is the hall/closet lock.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Set!

This question is from Flair Bright Brass Hall and Closet Lever
Asked by
KCMO
Read all my Q&A
September 2, 2015
can I buy one set of this and install the lever on the outside of each door that's either left swing and right swing and leave the original ball type handle on the inside of the door's? this would split the sets into 2 doors instead of just one. All using the same brand or Schlage passage handles. Privacy and locking doors would be different story.
If these were not made to do this I don't see why they could not be made to do it by making a door trim that snaps over or spins on the hardware hiding any screws.

Or convert to fit any type knob like changing the lever from one side of a door to other and or popping out the center to convert from dummy to passage handle or privacy lock.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

September 9, 2015
Answer: 
You would need one F10 for each door if you're just wanting a lever on one side. So for that case, you will need a F10 with a knob and a F10 with a lever
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Can I use this handle (right & left) on double doors that open out (this goes into a walk in closet)?

This question is from Flair Bright Brass Hall and Closet Lever
Asked by
Avon Lake OH
Read all my Q&A
August 26, 2015
Will the doors "latch" closed to each other?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

September 1, 2015
Answer: 
yes you can.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
2 »
  • 2016-08-27 T16:17:12.212-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100076495, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 50ms
  • QUESTIONS, PRODUCT

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 60ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;