Schluter Kerdi-Shower 48 in. x 48 in. PVC Shower Kit with Stainless-Steel Drain-KK122PVCE - The Home Depot
Message to Our Customers


Model # KK122PVCE

Internet # 202608408

Store SKU # 571619

Kerdi-Shower 48 in. x 48 in. PVC Shower Kit with Stainless-Steel Drain

Schluter Kerdi-Shower 48 in. x 48 in. PVC Shower Kit with Stainless-Steel Drain

This item has been discontinued.
The Home Depot no longer carries this specific product.

$459.00 / each


Model # KK122PVCE

Internet # 202608408

Store SKU # 571619

Store SO SKU # 1000894572

The Kerdi-Shower-Kit is an all-inclusive package containing the components required to create a watertight shower assembly. The prefabricated sloped shower tray eliminates the need for a mortar bed. Kit includes a 48 in. x 48 in. shower tray, shower curb, PVC drain with stainless steel grate, Kerdi waterproofing membrane, Kerdi waterproofing band, preformed waterproof corners, pipe seal and mixing valve seal.

  • Includes a PVC drain with integrated bonding flange (2 in. outlet) and grate with a stainless steel finish
  • Fits a 48 in. x 48 in. shower area
  • For commercial and residential use
  • Designed to create a fully waterproof and vapor tight enclosure for tiled showers and steam showers
  • Kit contains a presloped shower tray, shower curb, waterproofing membranes, strips, corners, pipe seal and mixing valve seal

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Assembled Depth (in.) 
48 in 
Assembled Height (in.) 
72 in 
Assembled Width (in.) 
48 in 
Product Height (in.) 
Product Length (in.) 
Product Width (in.) 
Threshold Height (in.) 
Built-In Shower Seat 
Color Family 
Stainless Steel 
Stainless Steel 
Drain Included 
Installation Hardware Included 
Product Weight (lb.) 
25 lb 
Shower Base Type 
Made for tile 
Warranty / Certifications
Certifications and Listings 
CSA Listed,NSF Listed 
Manufacturer Warranty 
10 Year Limited Warranty 


Rated 3.9 out of 5 by 8 reviewers.
Rated 5.0 out of 5.0 by Excellent product and support I installed this kit with my father, having never done bathroom work or tile work before. This particular bathroom was in a finished basement, with a concrete slab. The directions and supporting videos made this an job a little easier. I needed to modify the 48'x48' down to 36"x36" and adjust the curbing length as well. This product cut easily and cleanly with a utility knife and handsaw respectively. This was intended to be an open corner shower, so I needed to purchase another length of curb from a tile store, as the kit only comes with one. The roll of waterproofing membrane was more than enough for my use. My only suggestion is to apply it to the thinset on the walls quickly while it's sufficiently wet, or you may have issues with adhesion. December 17, 2013
Rated 4.0 out of 5.0 by Worth it for the peace of mind Since this was the first shower I installed I was nervous to follow the instructions exactly. It took longer than I expected but once finished the quality was better than I could have done without the kit. It's design was foolproof and gives a great result. December 17, 2014
Rated 5.0 out of 5.0 by Great purchase! No drilling just cut to size and you're ready to go. Best fit you will find. Sure to be no water sepping through. July 15, 2014
Rated 4.0 out of 5.0 by Waterproof Membrane I just finished installing this kit and did a flood test. It is most certainly waterproof. It takes a fair amount of time to install. It is also very expensive. I have seen it on HGTV and I wanted to try it because I don't usually install tile showers because they almost always leak somewhere. I haven't been that fond of the idea of backer board because there is no where for the water to go. But next time I am going to try Hydro Ban by Laticrete on backer board. I will try to update my review if I can after using Hydro Ban and backer board. February 7, 2014
Rated 4.0 out of 5.0 by Drain install was a challenge Had some challenges with installing the drain since this went in a basement bathroom and finding unmodified thin set but the installation of the base, material and curb all went well and was fairly straight forward. April 14, 2014
Rated 4.0 out of 5.0 by watch the video and fallow the steps.pretty easy! We saved a lot of time compared to laying a full mortar bed.We bought ours over-sized and cut it down to 42 x 40 with a circular saw it was very simple.Make sure you have a good true trowel for leveling out the thinset and the Kerdi on the walls.We did not use the curb in our application.I wish you could buy it with or without the curb. December 25, 2013
Rated 4.0 out of 5.0 by Easy product to use My only problem was that it did not have enough curb. I had to purchase extra curb in order to complete my corner shower. I wish that Schluter had made that more clear. November 13, 2013
Rated 1.0 out of 5.0 by Worst mistake I ever made First of all $450. For foam base and a roll of membrane. Really. That's a lot of money Second. This is not as easy as floating your own cement pan and roll on a can of Red Guard. I had to use Un modified mortar and you would think that the employees would even know what that is and where it is. I had to call the 800 number at Kerdi to find out what the SKU was so the employee could find it. Very disappointed and had to buy a can of Red Guard to go over this stuff so I can sleep at night it won't leek. February 8, 2014
  • 2015-05-03T10:08:22.844-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_8, tr_8
  • loc_en_US, sid_202608408, prod, sort_default
1-8 of 8


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.