0015944961010

Seal-Krete

Model 961001

Internet #203002756

Store SO SKU #1000471261

Epoxy Seal Low VOC Armor Gray 961 1 gal. Concrete and Garage Floor Paint

$30.87 /each

Frequently Bought Together

Product Overview

Seal-Krete Epoxy Seal Clean Air, Low VOC Formula is a ready-to-use, acrylic-epoxy blend formulated to resist hot tire pick-up, oil, grease, and gasoline. This epoxy-fortified formula dries to a durable, UV-resistant, satin finish that resists scuffing, peeling, blistering and fading. Epoxy-Seal is easy to maintain, making it ideal for both interior and exterior high-traffic areas including garage floors, driveways, shop floors, basements, pool decks, walkways, patios, porches and more.

  • Ready-to-use
  • Resists oil, chemicals, hot tire pickup
  • Hi-hide
  • Interior/exterior
  • Soap and water clean-up
  • Actual paint colors may vary from on-screen and printer representations
  • Online Price includes Paint Care fee in the following states: CA, CO, CT, MN, OR, RI, VT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

1 Question1 Answer

Customer Questions & Answers

Epoxy Seal Low VOC Armor Gray 961 1 gal. Concrete and Garage Floor Paint
Epoxy Seal Low VOC Armor Gray 961 1 gal. Concrete and Garage Floor Paint

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
This question is from Epoxy Seal Low VOC Armor Gray 961 1 gal. Concrete and Garage Floor Paint
 
1 answer

I have a concrete stain on my garage flooor, can this product be applied over this?

This question is from Epoxy Seal Low VOC Armor Gray 961 1 gal. Concrete and Garage Floor Paint
Asked by
United States
Read all my Q&A
May 18, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
www.seal-krete.com
Read all my Q&A
May 19, 2014
Answer: 
Dear Bobs,
Here are the instructions for previously stained concrete via our Technical Data Sheet available on our SEAL-KRETE website. Preparation is key to the success of Epoxy-Seal application. If you have any questions during the process, please contact a Technical Services Representative at 800-323-7357.
Previously Stained Or Painted Concrete:
For use over one-part water-based coatings only; not
Read More
Dear Bobs,
Here are the instructions for previously stained concrete via our Technical Data Sheet available on our SEAL-KRETE website. Preparation is key to the success of Epoxy-Seal application. If you have any questions during the process, please contact a Technical Services Representative at 800-323-7357.
Previously Stained Or Painted Concrete:
For use over one-part water-based coatings only; not recommended over oil-based coatings. Remove loose or peeling paint and degloss surface by sanding (150–200 grit paper).** Follow with a general cleaning. Rinse thoroughly and let dry. Then coat the surface with SEAL-KRETE Lock-Down Concrete Bonding Primer.
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-09-08 T11:45:50.276-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203002756, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 17ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 1.0 out of 5 by 2 reviewers.
Rated 1.0 out of 5.0 by does not prevent hot tire pick-up.. i applied this product when epoxy-ing my garage floor.. this was applied to my washed concrete garage that had been painted with simple outdoor paint and displayed hot tire pick-up and stains from the previos owner.. i thoughly washed and scrubbed the floor and removed any peeling paint and let air dry.. applied the Seal-Crete Lock Down primer to "bond" the epoxy primer to the floor and prevent hot tire pick-up.. painted everything on with a roller/extension.. primer was dry after 4 to 5 hours and good enough to walk on, but i wanted to wait 24 hours before applying my epoxy.. this product covered my 20 x 20 garage with a thin coat - needed two gallons to do two coats, first coat thin, second coat medium.. let first coat dry for 3 days, the second, 5 days.. also applied clear coat sealer, two coats, 24 hours between, and waited 5 days to drive cars into the garage, as directed.. not satisfied - after 1 month i have hot tire pick-up.. does not work as advertised.. it is also ridiculously slippery when wet or you have on shoes that are wet from walking on wet grass or simple slick bottom shoes.. i took great care/caution and followed directions religiously for application, as this takes a TON of time and money (130$ in all) and do not feel like it was worth it at all.. May 31, 2013
Rated 1.0 out of 5.0 by SealCrete Poor adherence to smooth concrete basement floor, even with recommended primer product from same company. I stripped floor and even power wire-brushed it. Cleaned it well, but the paint started peeling up and flaking within a week. Stripped first coating and wire-brushed again, but second try only last about a week and a half. Note: I used commercial grade carpet tiles with rubber backing over surface after allowing a few days of curing on second try and I suspect it is humidity related. I will not buy this product again. May 28, 2013
  • 2016-09-08 T12:06:19.055-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_2, tr_2
  • loc_en_US, sid_203002756, prod, sort_default
1-2 of 2
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 17ms
  • REVIEWS, PRODUCT