Model # 106001

Internet #202563942

Store SO SKU #1000471034

Seal-Krete Lock-Down 1 gal. Epoxy Bonding Floor Primer


Lock-Down 1 gal. Epoxy Bonding Floor Primer

  • Locks paint and stain to bare or painted concrete.
  • Ideal primer for 1-part epoxy on garage floors.
  • Reduces peeling and hot tire pickup.
$14.98 /each

Frequently Bought Together

Product Overview

Designed for use on bare concrete surfaces in indoor and outdoor spaces, the Seal-Krete Lock-Down 1 gal. Epoxy Bonding Floor Primer features a water-based formula that helps lock paint onto the floor and resists hot tire pickup. This mildew-resistant epoxy contains low volatile organic compounds (VOCs). Low odor and low volatile organic compounds (VOCs) for your convenience.

  • Suitable for use on interior and exterior concrete floors
  • Water-based 1-part epoxy helps lock paint onto bare concrete surfaces and provides good topcoat adhesion
  • Helps prevent hot tire pickup for durability
  • Resists mildew to help maintain a pristine appearance
  • 1 container covers up to 500 sq. ft. depending on surface porosity
  • Online Price includes Paint Care fee in the following states: CA, CO, CT, MN, OR, RI, VT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.



Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Can I use Lock-Down to seal drywall in shower before tiling?

I am not able to take down the wall in my apartment to replace it with green or cement board to waterproof before re-tiling. The building super recommended to use an epoxy on the wall. Can I use Lock-Down to seal drywall in shower before tiling?
Asked by: Ryan
Yes, as long as it's a concrete surface.
Answered by: CommunityAnswer
Date published: 2016-05-01

What is the maximum amount of time I can wait to top-coat after I put this product down?

Asked by: hardmf
You must wait no more than twenty four hours no less than four.
Answered by: Beardman48
Date published: 2015-09-20

Can you use this under peel and stick vinyl planks?

Asked by: Linda
No, this can not be used under peel and stick vinyl planks
Answered by: CommunityAnswer
Date published: 2016-08-04

how many square feet in a can

Asked by: shane
COVERAGE for Lock-Down primer: 250 sq. ft. per gallon on broom finish concrete; 500 sq. ft. per gallon on smooth concrete floors; 500 sq. ft. on previously painted surfaces. Actual yield may vary based on nap or roller used. This information is from the technical data sheet available at
Answered by: Jo
Date published: 2017-03-05
  • y_2017, m_4, d_16, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_24
  • loc_, sid_202563942, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 17ms

Customer Reviews

Lock-Down 1 gal. Epoxy Bonding Floor Primer is rated 4.4 out of 5 by 8.
Rated 5 out of 5 by from It went on fast and easy -- it's thin but... It went on fast and easy -- it's thin but seems to have penetrated into the concrete well. It also seems to have done a good job for what I particularly wanted -- increasing adhesion over a previously-epoxied layer. Of course, when it'll be months after we start using the floor before we really se
Date published: 2017-04-19
Rated 5 out of 5 by from Applied on previous painted concrete floor Worked as advertised power wash first and be prepared to put finished product on after 4 hrs.
Date published: 2017-01-25
Rated 5 out of 5 by from Worked Great Applying was easy and everything worked as written in the instructions. Be sure to prep your floor correctly or all your work is worthless. Our basement floor already had a sealant on it. Instead of using the acid etch product, we opted for the safe route (though highly labor intensive) and rented a diamond floor grinder. Primer, paint, and clear coat went on easy. The floor looks great and the finish appears to be very durable. Great product and would recommend it to anyone. One last thing, call tech support with any questions. I talked to a guy named Bob who was excellent to deal with.
Date published: 2014-09-15
Rated 5 out of 5 by from Worked great If you follow all the steps for cleaning concrete such as pressure wash and etch this works great, stain went right on and stays on you must make sure concrete is clean and water must absorb into concrete very pleased with results.
Date published: 2013-09-21
Rated 5 out of 5 by from Great product and great system Use this primer along with the complete Seal-Krete system including the concrete etcher, paint, paint, chips and clear seal. Visit the Seal-krete website: for detailed instructions on how to apply the products and for detailed technical data. The products went a lot farther than I thought they would and I over ordered. But, Home Depot gave me refunds for all unopened products. We did a very large area and were not interested in the smaller epoxy kits.
Date published: 2016-05-24
Rated 5 out of 5 by from Covered patio I am very pleased with this product. I used a brush to cut in around the edges, then a roller In the field. It dried fast, but it looked like dirty spots. They cleared up as everything dried. The concrete is 30 days old, but with dirt and dust blowing in I pressure washed it and let it. Dry for 24hours. I highly recommend it, for ease fo using
Date published: 2013-03-11
Rated 3 out of 5 by from Not sure if you really need it this primer felt like a diluted solution of wood glue and water. Its not very adhesive as it is marketed to be. You may not need it on rough concrete. On smooth concrete, the suggestion is to etch it before applying primer. I dont think you would need this primer if its already etched. Nevertheless, I followed the instructions and the primer did its job. Just that it felt like an insurance that I did not need
Date published: 2016-06-24
Rated 2 out of 5 by from Seal Crete Maybe my product was old, even though I used it within 10 days of receiving it. Short work time and turns gooie. Followed instructions and it worked OK, but I expected better quality product. Perhaps it was past it's shelf life. Go with the more expensive products available.
Date published: 2014-07-08
  • y_2017, m_4, d_21, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_, sid_202563942, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 24ms