Model # SB114140F

Internet #203232310

Store SO SKU #1000316821

SharkBite 1-1/2 in. Brass Push-to-Connect x Female Pipe Thread Adapter


1-1/2 in. Brass Push-to-Connect x Female Pipe Thread Adapter

$4530 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

SharkBite 2XL (commercial) is an extensive range of SharkBite fittings and ball valves available in sizes 1-1/4 in., 1-1/2 in. and 2 in. The SharkBite 2XL is compatible with copper, PEX and CPVC pipe. It is certified for use in commercial and residential applications for potable water, hydronic heating, chilled water and general water distribution for irrigation.

California residents: see   Proposition 65 information

  • Lead free DZR brass construction for durability and reliability
  • Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
  • Innovative push-to-connect design makes for quick and easy installation
  • Push-to-connect fittings require no solder, glue, unions or tools
  • Fitting can be rotated on pipe after installation making it easier to work in tight spaces
  • Designed for potable water distribution as well as hydronic heating applications
  • Corrosion resistant to improve longevity
  • Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
  • Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
  • Meets all UPC, IPC and cUPC requirements
  • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
  • Rated to 200°F and 200 psi

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Compare Similar

$42.90 /each
$45.30 /each
$51.50 /each
$51.90 /each
Name 2 in. Brass Push-to-Connect Coupling 1-1/2 in. Brass Push-to-Connect x Female Pipe Thread Adapter 2 in. Brass Push-to-Connect x Female Pipe Thread Adapter 1-1/2 in. Brass Push-to-Connect Slip Coupling
Brand SharkBite SharkBite SharkBite SharkBite
Ratings (0) (1) (0) (0)
Fitting or Connector Type Adapter or Coupling Adapter or Coupling Adapter or Coupling Adapter or Coupling
Connectivity Push to Connect Push to Connect Push to Connect Push to Connect
Material Brass Brass Brass Brass
View Product View Product View Product View Product



Product Depth (in.)
Product Height (in.)
1.5 in
Product Length (in.)
3.21 in
Product Width (in.)
1.5 in


Push to Connect
Fitting Diameter (in.)
Fitting or Connector Type
Adapter or Coupling
Fitting/ Connector Collection
Maximum working pressure (psi)
Pipe or Fitting Product Type
Fittings & Connectors
Product Weight (lb.)
Push to connect

Warranty / Certifications

Manufacturer Warranty
For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242.

More Products With These Features


Customer Questions & Answers

Can it be used to connect to a PVC pipe or does it have to be CPVC?

Asked by: Waterdog
sharkbite fittings work on copper, pex and cpvc only because they grip the outside diameter of the pipe.
Answered by: rudy1
Date published: 2016-10-24

Can this be used with galvanized male fittings or directly on galvanized pipe that is threaded?

Asked by: plumberquestions123
Yes, it can be used on 1/2 in. galvanized pipe that is threaded. The fit from female end of this product to male end of galvanized pipe will be perfect (assuming you use plumber's tape correctly).
Answered by: TubaDawg21
Date published: 2016-10-30

Work For Hose Bib?

I need to install a new hose bib on my 3/4" copper pipe. My current hose bib is not a standard length. Can I buy a new 3/4" frost free hose bib, attach this fitting to the threaded male end of the hose bib and then attach the shark bite slip on side it to my existing 3/4" copper pipe?
Asked by: Chris
Answered by: rudy1
Date published: 2016-10-24

Just to clarify...

Both ends of this adapter are meant to fit 1/2 in? Meaning that the push end will fit a 1/2" pex pipe and the brass female adapter will receive a 1/2" male threaded fitting, correct?
Asked by: ShulDawg
Answered by: LLB
Date published: 2016-09-11
  • y_2017, m_8, d_18, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_, sid_203232310, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 158ms

Customer Reviews

1-1/2 in. Brass Push-to-Connect x Female Pipe Thread Adapter is rated 4.2 out of 5 by 12.
Rated 5 out of 5 by from Perfect fit. Just with there was a sharkbite product that went from 1/2 to 1/4 to work with the r... Perfect fit. Just with there was a sharkbite product that went from 1/2 to 1/4 to work with the reverse osmosis purifier fridge kit. It took this female 1/2 fitting and one other male 1/2 to 1/4 back to back to make the connection.
Date published: 2017-05-10
Rated 5 out of 5 by from Plumbing has never been so much fun! My husband and I recently purchased a cabin that was built back in the 1940's, it needed a total gut job down to the studs! Needless to say, that included plumbing. We received several estimates over $2500 to replumb it. We have done traditional plumbing before and knew we could do it ourselves...but it's such a pain! After speaking with an amazing Home Depot Rep about the SharkBite system, we decided to give it a try. It took us less than an hour to replumb the entire bathroom, and another 20 minutes to tie in the kitchen! And it was fun! The initial investment seems expensive, but compared to traditional copper, plus the added expense of a plumber, this was worth it's weight in gold!
Date published: 2012-06-19
Rated 5 out of 5 by from unbelievably easy to use instant no leak connection. used on water heater replacement . cut old copper lines, pushed on connector, attached threaded hose to water heater.... done. no leaks, no problems . def will use again.
Date published: 2016-03-30
Rated 5 out of 5 by from Practical and it works Don't waste your money getting copper if you need a fitting to do the job right. I bought brass fittings made by Shark Bite and is simply the best. I learned the hard way. I just installed a water heater in my house and used copper fittings from another manufactures, Blue Hawk I believe. It was such a waste of money and mainly time. No matter what sealant I applied, it leaked. Such a frustrating experience. I ended up spending more more on those other fitting. That when I bought Shark Bite and installed their copper fittings and this particular one made out of brass. Guess what...not a single sign of moist. I recommend this fitting and brand. Don't use capper where it need to be tight. The threads will no hold.
Date published: 2015-11-25
Rated 5 out of 5 by from Nothing short of miraculous I was replacing a 4 way shower diverter and did not want to solder. I cut the 1/2 copper pipes square, de-burred them with the sharkbite tool, added Teflon tape to the threads and popped them on. It was a tight spot, so had to modify the de-burr tool slightly so that it would rotate in the limited space (I cut the tool leaving just the 1/2 inch end). One challenge was that the hot and cold pipes (left and right) were fixed, so there was no room to get the last sharkbite connection on (see pic). No worries, sharkbite has a two inch slip coupling that did the job. I cut out a 3 inch section of pipe, shortened this to 2 inches and put this on the non-slip end of the slip coupler and slipped it on which left enough space to get the last connector in. Attached the last sharkbite to other end of my 2" pipe on the slip connector, pulled it onto the cold water thread with the tool provided and tightened. Voilà! Before I turned on the water to test the pressure I was doubtful it would hold. The connectors spin on the pipe when you tighten them! What!? I was dumbfounded, not a drop! All connections were tight and the diverter is firmly held in place. Amazing product! A miracle indeed. We've used the shower for a week and still no leaks.
Date published: 2016-01-27
Rated 5 out of 5 by from Awesome Product I rave about the the smaller SharBite connectors and now I will do the same for the new 2X connectors. The design is even better than the small ones and the product feels very solid. I used it to tie into a 1 1/2 inch drain line that was ran through a concrete wall. The connection is solid and leak free. Definitely worth the cost. It saved me on both time and materials.
Date published: 2016-05-17
Rated 5 out of 5 by from Works as Expected Other fittings from Menards leaked when boiler water was below 100 degrees. These do not leak ever.
Date published: 2016-02-23
Rated 5 out of 5 by from fixed leak that other compression fitting didn't Got two of these to use on male hot water heater posts to go to 3/4 copper. Got another brand first, but they kept leaking at the threaded end. Talked to a friend said I needed to make sure the fitting was ntp for hot water heater. These are ntp and they worked great the first time. Used some Teflon paste and good to go.
Date published: 2015-01-01
  • y_2017, m_8, d_18, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_, sid_203232310, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 108ms