Model # UC600LFA

Internet #202270573

Store SKU #274098

Store SO SKU #1000311585

SharkBite 1/2 in. Brass PEX Barb x Female Copper Sweat Adapter


1/2 in. Brass PEX Barb x Female Copper Sweat Adapter

$238 /each

Frequently Bought Together

Product Overview

The SharkBite PEX 1/2 in. Barb x 1/2 in. Female Sweat Adapter is an easy to install, low cost solution to transition from copper to PEX Tubing. SharkBite PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These PEX fittings may be used with the stainless steel clamping system or the copper crimp ring system (both sold separately) The SharkBite PEX Barb fitting range offers a wide variety of Fittings, Manifolds, Valves, clamp rings, crimp rings and tools in various sizes to help complete your next plumbing project.

California residents: see   Proposition 65 information

  • Lead free DZR brass construction for durability and reliability
  • Low-Cost plumbing connection system
  • Barb connection
  • Compatible with PEX pipe
  • NSF listed
  • Meets UPC, IPC, and cUPC requirements
  • Fittings work with crimp ring or clamp connection methods
  • Rated to 200°F and 200 PSI

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 245ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Customer Reviews

1/2 in. Brass PEX Barb x Female Copper Sweat Adapter is rated 3.0 out of 5 by 8.
Rated 5 out of 5 by from So easy, if you know what to do! I used on a few supplies and had no issues. You must heat the piece correctly in order to take solder.
Date published: 2016-12-10
Rated 5 out of 5 by from No problem -- a great fitting I have installed about a half dozen of these adapters recently. I had no problem sweating them. I wire brushed both surfaces and used a good flux. Oatey No. 95 petroleum-based tinning flux worked great, but I also had good results with Oatey's H2O-95 water-based tinning flux. The latter is less forgiving and more difficult to use, but eliminates the insoluble sludge inside the pipe and is easier to clean up on the outside. I used Oatey Safe Flo lead free solder. I was able to test all of my sweat assemblies with air before installing in my house. All of them had no detectable air loss, 2 hrs at 100 psi. After installing in my house, I did not have one drop of water leak out either end of these adapters at roughly 60 psi. Great Results! I'm a DIY'er.
Date published: 2016-08-06
Rated 1 out of 5 by from Wast of time. Very difficult to use These sweat adapters are horrible and impossible to sweat. I've sweat thousands of fittings with very few leaks. I converted my house from copper to pex and every single fitting leaked when I turned the water back on. I called my buddy who is a master plumber to come help me because I thought I was doing something wrong but he said these fittings are terrible and extremely difficult to sweat, and they don't bother with them any more.
Date published: 2015-08-24
Rated 1 out of 5 by from Almost impossible to sweat I also found these almost impossible to sweat. I even took a brand new fitting, scrubbed it with a wire brush and sandpaper to a bright shiney finish, applied flux and tried to tin the fitting before I even installed it. The solder would just bead up and roll off the piece. Must be something wrong with the alloy of the piece. Completely unusable !
Date published: 2016-01-11
Rated 5 out of 5 by from Worked for me I had no problems using these fittings. They sweat right on the pipe the 1st try.
Date published: 2016-08-09
Rated 1 out of 5 by from Failed everytime I tried MAP then propane, high flame then I tried low flame. All failed to get solder sip in this fitting on copper pipe. Don't buy this product!
Date published: 2016-02-01
Rated 5 out of 5 by from Quick and simple I've used several of these over the past couple of years and never had a single issue... no leaks, no troubles. They are quite thick compared to other copper fittings, but they always take the solder just as well as anything else. I use MAP gas with these regularly, and will continue to use them.
Date published: 2016-03-24
Rated 1 out of 5 by from impossible to solder I think that I came close to melting a copper pipe trying to get these to work. Not worth the effort.
Date published: 2016-04-30
  • y_2017, m_5, d_23, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_, sid_202270573, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 85ms