SharkBite 1/2 in. Brass Push-Fit End Stop-U514LFA at The Home Depot
Free shipping


Model # U514LFA

Internet # 202270531

Store SKU # 282608

1/2 in. Brass Push-Fit End Stop

SharkBite 1/2 in. Brass Push-Fit End Stop

This item has been discontinued.
The Home Depot no longer carries this specific product.

$5.94 / each
  • 1/2-inch SharkBite Push-Fit endstop creates a perfect seal.
  • Use to connect any combination of copper, PEX or CPVC pipes.
  • Corrosion resistant to improve longevity.
Item cannot be shipped to the following state(s): AK,GU,HI,PR,VI


Model # U514LFA

Internet # 202270531

Store SKU # 282608

Store SO SKU # 732682

The 1/2 in. SharkBite Push-Fit Endstop is the easiest way to cap copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

California residents: seeProposition 65 information

  • Lead Free DZR Brass construction for durability and reliability
  • Use to connect to any combination of Copper, PEX, or CPVC Pipes
  • Innovative Push-Fit design makes for quick and easy installation
  • Push-Fit connections require no solder, glue, unions, or tools
  • Fitting can be rotated on pipe after installation making it easier to work in tight spaces
  • Designed for potable water distribution as well as hydronic heating applications
  • Corrosion Resistant to improve longevity
  • Design certified and listed to ASSE 1061 & NSF/ANSI 372-2010 & NSF/ANSI 65
  • IAPMO Listed
  • Meets UPC, IPC, and cUPC requirements
  • Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
  • Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
  • Adapts to pipe using Push-Fit Connection
  • Maximum working pressure of 200 PSI

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Assembled Depth (in.)  0.5 in  Assembled Height (in.)  .5 in 
Assembled Width (in.)  1.08 in  Bend Degree  Other 
Fitting or Connector Type  Cap  Manufacturer Warranty  For warranty information on this product, please call our Internet Customer Service Center at 1-800-435-4654. 
Material  Brass  Maximum working pressure (psi)  200.0 
Pipe or Fitting Product Type  Fittings & Connectors  Product Height (in.)  1.08 
Product Length (in.)  0.5 in  Product Weight (lb.)  0.051 lb 
Product Width (in.)  0.5 in  Push to connect  Yes 
Push-to-Fit  Yes  Rating  200 psi 
Returnable  90-Day 


Rated 4.8 out of 5 by 5 reviewers.
Rated 5 out of 5 by Best thing to happen to indoor plumbing since... indoor plumbing. Got a couple of these to temporarily cap some supply lines while doing a remodel. Stupid easy to use, just make sure you have a clean cut and push them on. Need to take'em off? No problem, push on the collar and they slide off. No fuss, no muss, no leaks! No heating a pipe enough to burn off the remaining water inside to get a good joint when soldering. Will be nice to have around for emergency use when I'm done with them too. A little pricey at first, but cheaper than a plumber or connections that leak because you had some steam/water leftover when trying to solder. June 5, 2012
Rated 5 out of 5 by handy for an emergency the Sharkbite system is so easy to use I decided to get one of these to have on hand if ever I have a leak and I need to close of a line until I can get the parts needed to make the fix. I can later remove it and keep it for the next time! I tested it on both 1/2" copper and PEX and it just pushes on and comes off easily with the removal tool (available separately or with other fittings) February 1, 2014
Rated 5 out of 5 by Great Problem Solver This product was so easy to use and a great fix for my leaking pipe. February 4, 2014
Rated 4 out of 5 by I like this product I dislike sweating copper. While these are not cheap, they work very well, and I don't need a plumber's torch! January 10, 2012
Rated 5 out of 5 by Shark bites are great in general, the sharkbite product is great. designed for easy installation. December 10, 2013
1-5 of 5


Cost Saver Shipping includes initial transportation by small parcel service, with final delivery made by U.S. Postal Service. Tracking information may be limited.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.