Model # 23037-0000LF

Internet #202270613

Store SKU #745348

Store SO SKU #1000317167

SharkBite 1/2 in. Chrome-Plated Brass Push-to-Connect x 3/8 in. O.D. Compression Quarter-Turn Straight Stop Valve
0697285605756

SharkBite

1/2 in. Chrome-Plated Brass Push-to-Connect x 3/8 in. O.D. Compression Quarter-Turn Straight Stop Valve

  • Controls water flow to household plumbing fixtures
  • Allows for easy maintenance and repair in your home
  • Push on copper, CPVC or PEX with no solder, clamps unions or glue
$9.72 /each

Frequently Bought Together

Product Overview

The SharkBite 1/2 in. Push-Fit x 3/8 in. O.D. Compression Straight Stop Quarter Turn Valve controls water flow to household plumbing fixtures. The Angle Stop Valve is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. The SharkBite push-fit end allows you to simply push on to Copper, CPVC or PEX with no solder, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces.

California residents: see   Proposition 65 information

  • Lead free chrome-plated DZR brass construction for durability and reliability
  • Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
  • Innovative push-to-connect design makes for quick and easy installation
  • Push-to-connect fittings require no solder, glue, unions, or tools
  • Fitting can be rotated on pipe after installation making it easier to work in tight spaces
  • Designed for easy-shut off at end fixtures
  • Corrosion resistant to improve longevity
  • Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
  • Meets all UPC, IPC, and cUPC requirements
  • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
  • Rated to 200 DegreeF and 200 psi

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Can this be used to slow down the water pressure or is it only off and on?

Its runs off a ice maker water filter to a kcup coffee reservoir tank. If I lower the pressure before the ice maker, the ice maker fills to slow. So, I need something to control pressure after the ice make between the two connections. Or the coffee reservoir fills to fast and splashes the lid off!
Asked by: Notaplumber
This is for on/off if you need a valve for slowing down the water try a gate valve.
Answered by: Retired20959
Date published: 2016-01-24

I see that the maximum temp. for this product is 200F; what is the minimum temp?

Asked by: BronxBomber65
It is not recommended for the valve to be exposed to temperatures below 32 deg F which could cause freezing in the pipes and lead to a failure. Thank you!
Answered by: SharkBite Support
Date published: 2016-07-05

how is it removed?

Asked by: Deed
You have to buy special disconnect clips, but they are only a couple bucks.....http://www.homedepot.com/p/SharkBite-1-2-in-Disconnect-Clip-U710A/100638139?MERCH=REC-_-PIPHorizontal1_rr-_-202270613-_-100638139-_-N
Answered by: Gregg
Date published: 2016-03-31

Will this Valve work on Mobil Home plumbing ??

Will this Valve work on Mobil Home plumbing ??
Asked by: homer
Sure, as long as your pipes are either Copper, CPVC or PEX. It will work on ANY of those, but in order to take it off you will need a special little plastic remover tool (they are only a couple bucks but you need them for each size).
Answered by: Gregg
Date published: 2017-03-01
  • y_2017, m_4, d_22, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_, sid_202270613, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 24ms
  • QUESTIONS, PRODUCT

Customer Reviews

1/2 in. Chrome-Plated Brass Push-to-Connect x 3/8 in. O.D. Compression Quarter-Turn Straight Stop Valve is rated 4.9 out of 5 by 25.
Rated 5 out of 5 by from Simple but effective I had to replace a 10 year old shut-off valve. Because my house has pex tubing, I didn't want to spend the $$$ for tools (the most expensive part of the repair). Did some research on Shark Bite products; bought the valve, the removal tool, and a cutting tool (to cut the pex pipe). Installation was so simple. Done in under 1 minute! Tried the removal tool; works as described. No issues installing or removing the valve. I recommend this valve to anyone that needs a quick-fix plumbing repair. The valve is about 3 times more expensive than a simple valve, but then you need the removal and installation tools for pex tubing.
Date published: 2017-01-08
Rated 5 out of 5 by from Used with PEX piping under sink for faucet install. Old stop valve cracked and was leaking. Didn'... Used with PEX piping under sink for faucet install. Old stop valve cracked and was leaking. Didn't want to invest in tools that I would probably use for this one DIY fix so I purchased this item. Removed old stop valve, sanded PEX to make sure it was smooth and pushed on the SharkBite stop valve. Those that are complaining about the price must not have priced the clamp tool and everything else that would be needed if another stop valve was used. I didn't mind paying a little more for the convenience and ease of the install. I would definitely purchase again if needed for another DIY project. Ill worry about getting it off if and when the time comes. If you are on the fence with purchasing this item, just go ahead and buy it and move on to the next task on your "honey do" list.
Date published: 2017-01-22
Rated 5 out of 5 by from Sooo easy and awesome! We have cpvc water supply lines. Had to replace the shut-off valve to the toilet because it was hissing. Originally, the shut-off valve was a compression solder weld with a multiturn handle. I wanted a 1/4 turn. The Sharkbite was so easy to install. I used a circular copper pipe cutter to cut the cpvc just below the weld and pushed the SharkBite on until it clicked and couldn't go any further. Not a drop of water leaks and it took me a total of 5 minutes...the longest part being cutting the cpvc pipe!!
Date published: 2017-01-24
Rated 5 out of 5 by from solder style connectors are soon to be a thing of the past. SharkBite (Cash Acme of Alabama) i... solder style connectors are soon to be a thing of the past. SharkBite (Cash Acme of Alabama) is the top manufacturer, the absolute best. Solid, rugged fixture, it all fits well, looks good, performs well. Plumbed in 2 commodes supply lines and a kitchen sink dishwasher. Did a shower valve a few years back: what would have needed 11 or 12 solder joints in a tight wall was done with a few SharkBite fittings and flex, braided hose in just a few minutes.
Date published: 2017-03-23
Rated 5 out of 5 by from I purchased this item because being a woman I didn't own many tools. It cost more than other tu... I purchased this item because being a woman I didn't own many tools. It cost more than other turn-offs but was worth it. I installed it quickly with no problems. Great product!
Date published: 2016-11-29
Rated 2 out of 5 by from No ferrule included in the compression end. Fine for toilets and other screw-on fixtures, but why... No ferrule included in the compression end. Fine for toilets and other screw-on fixtures, but why include the compression nut if you aren't including the ferrule?
Date published: 2016-11-25
Rated 5 out of 5 by from sharkb items 1/2" 1/4 turn this is a no Brainerd to replace the plastic push pull type. In a matter of minutes you'll have them.replaced with sharkbites
Date published: 2016-11-06
Rated 5 out of 5 by from 5 Star Review Rating provided by a verified purchaser
Date published: 2017-04-04
  • y_2017, m_4, d_16, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_25
  • loc_, sid_202270613, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 19ms
  • REVIEWS, PRODUCT