Model # UP248A

Internet #202033078

SharkBite 1/2 in. Plastic PEX Barb 90-Degree Elbow
0697285604445

SharkBite

1/2 in. Plastic PEX Barb 90-Degree Elbow

$1.51 /each

Frequently Bought Together

Product Overview

SharkBite Advanced Polymer (plastic) PEX fittings are the perfect solution for when corrosion may affect DZR Brass fittings. Polymer fittings should be used with PEX tubing (not included) and work in conjunction with copper crimp rings or stainless-steel clamp rings (not included). The maximum working pressure is 200 psi.

  • Plastic polysulfide construction
  • Lead free compliant and corrosion proof
  • Low-cost plumbing connection system
  • Barb connection
  • Compatible with PEX pipe
  • Meets NSF 61, ASTM F 877 and CSA 137.5
  • Meets UPC, IPC, and cUPC requirements
  • Fittings work with crimp ring or clamp connection methods
  • Rated to 200°F and 200 psi
  • Note: product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Are these plastic fittings UPC approved?

I need to know if these fittings are UPC approved before doing a project which will be inspected.
Asked by: cm5838
Our PEX fittings are tested to ASTM F 1807 and listed through NSF (link below). Table 604.1 in the UP code references ASTM F 1807 used with ASTM F 876/877 PEX tubing. 605.10.1 fittings. Fittings for PEX tubing shall comply with the applicable standards referenced in Table 604.1. PEX tubing in accordance with ASTM F 876 shall be marked with the applicable standard designation for the fittings specified for use with the tubing. http://info.nsf.org/Certified/Plumbing/Listings.asp?CompanyName=cash+acme&TradeName=&ProductStandard=&MaterialType=&ProductUse=&CanadianCode=&PlantState=&PlantCountry=&PlantRegion=&submit2=Search
Answered by: SharkBiteProductExpert
Date published: 2015-09-17

Are SharkBite Plastic fittings compatible with the copper crimp rings?

Asked by: Anonymous
Yes, they are designed to be used the same way as our brass PEX/barb fittings and can be joined using the copper crimp rings or the stainless steel clamp rings. They are also rated the same at 200 degrees F and 200 psi.
Answered by: SharkBiteProductExpert
Date published: 2015-09-20
  • y_2017, m_3, d_26, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_202033078, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 40ms
  • QUESTIONS, PRODUCT

Customer Reviews

1/2 in. Plastic PEX Barb 90-Degree Elbow is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from Pretty good for my computer project 99% of people reading this probably aren't using these fittings for the application that I did, but I will still provide some input. I used these in the plumbing of my water loop inside my computer, paired with some 7/16" ID tubing. Compared to 90 degree metal rotary fittings at around $15 a piece, these things are great value for money. I would recommend using tube with a smaller diameter than 1/2" (excluding PEX of course, for which this product was designed) and getting some hose clamps to seal the connection. Out of 10 elbows in my machine, only one leak occurred, and that was partially due to the elbow being offset a bit, which caused some tension on the barb. As for the quality of these parts, 0 out of 10 that I used had any sort of defect. Flowrate was not impeded whatsoever in comparison to other 90 degree elbows. Highly recommended!
Date published: 2012-07-04
Rated 5 out of 5 by from PVC elbow I needed this part to check fittmant of some hoses that where causing some clearance issue and it worked out just fine and pick from Home Depot was easy and fast.
Date published: 2016-02-23
Rated 5 out of 5 by from Good Quality Barb I used this piece to install some new PEX pipe under my house. It is a lightweight but strong piece. I prefer these to the metal ones due to no potential of lead getting into the water.
Date published: 2014-08-06
  • y_2017, m_3, d_26, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_, sid_202033078, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 21ms
  • REVIEWS, PRODUCT