SharkBite 2-Handle Full-Size Clamp Tool-23081 - The Home Depot
Discontinued

SharkBite

Model # 23081

Internet # 202032996

Store SKU # 851561

2-Handle Full-Size Clamp Tool


SharkBite 2-Handle Full-Size Clamp Tool
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$62.56 / each
Loading...

PRODUCT OVERVIEW

Model # 23081

Internet # 202032996

Store SKU # 851561

Store SO SKU # 732682

The versatile SharkBite 2-Handle Full-Size Clamp Tool effectively crimps 3/8 in., 1/2 in., 3/4 in. and 1 in. stainless-steel clamp rings onto PEX tubing (rings and tubing not included).Intended for use with clamp ring PEX tubing installations, the SharkBite PEX Clamp Tool compresses PEX tubing clamp rings to barb fittings. The clamp tool will not release from the clamp ring unless a properly-secured connection has been made. Only one clamp tool is required for all sizes of SharkBite PEX tubing installations, ranging from 3/8 in., 1/2 in., 3/4 in. and 1 in. fittings.

  • Use with stainless-steel clamp rings (not included)
  • Versatile clamp tool crimps 3/8 in., 1/2 in., 3/4 in. and 1 in. rings
  • Compatible with PEX pipe material
  • If properly calibrated, this tool eliminates the need to check each fitting ring with a go/no-go gauge (not included)
  • Note: Product may vary by store.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Assembled Depth (in.)  11 in  Assembled Height (in.)  1 in 
Assembled Width (in.)  2.75 in  Handle length (in.)  5.5 
Product Depth (in.)  16.75  Product Height (in.)  1.5 
Product Width (in.)  5.0 in 
Details
Compatible Pipe Material  PEX  Crimping force (lb.)  60.0 
Product Weight (lb.)  3.145 lb  Returnable  90-Day 
Warranty / Certifications
Manufacturer Warranty  For warranty information on this product, please call our Internet Customer Service Center at 1-800-435-4654. 

CUSTOMER REVIEWS

Rated 4.6 out of 5 by 8 reviewers.
Rated 5 out of 5 by Best PEX Crimper yet I've been using a ZURN crimper for many years and was always looking for something easier to use. This new crimper uses newer rings that are so much easier to us, and the tool takes up so little room and works perfect in tight areas. The other is you can crimp all sizes with the same tool. I would recommend this to anyone that has used pex in the past and if you have another job, this thing is the best and it's cheap. I spent over 100.00 for the Zurn back in 2005 and it only crimps 1/2". I added the photo of the manifolds using 1/2" and 3/4" rings. And these can easily be removed. Not so with the copper rings. December 15, 2013
Rated 5 out of 5 by Clamp tool works great I'm a long time DIY copper user, however, I thought that I'd give PEX a try. I had zero issues with the connections that I made using this tool. I was able to redo the majority of the plumbing in my basement within a day. I will caution that this tool is not for the weak. After a few clamps, I became tired... mostly from working over my head. The tool requires a great deal of force to clamp down, but fortunately it is a ratcheting type, so I could take time to regain my strength during the process without any issue. August 25, 2014
Rated 5 out of 5 by Ring Clamps are the way to go for DIY. This is a great tool for the job There are three ways to connect up PEX fittings. One stretches rings of PEX over your pipe and fittings, but you need an expensive tool for the job. Not appropriate for homeowners. The other two methods are ring clamps and clinch rings. With the clinch rings, you need a separate tool for each size of pipe. I chose to use ring clamps for the following reasons: One size fits all-- This clamp tool fits all available sizes of ring clamps and therefore all sizes of pipe. I only need one tool in my kit. Go-No Go--- when you clamp down on the rings, the tool grabs on to the clamp and you keep hauling on it until it ratchets down to the correct degree of compression. Then the tool lets go and you are done. Ooops--- If you incorrectly join a fitting, you can easily cut away the clamps with your diagonal cutters whereas the clinch rings require a special tool to cut the rings. The only down side I can see to the Ring Clamps is that they are a few cents more per clamp, but you'd have to install hundreds of fittings before the difference in cost was more than trivial. I've used this tool for two years now to replace all the copper in my house, and also used it down in the dirt to replace a broken iron supply pipe with PEX. The tool is easy to use and has been completely trouble free. November 17, 2013
Rated 5 out of 5 by First Time Pex user I am very happy with the SharkBite clamp tool and rings. Was very easy to use but after working all day it does become harder to clamp the rings after doing 20+ connections. I was a little worried because the fittings are able to spin after clamped, but after looking it up that was a feature of the product. Been a couple of days so far and no leaks, will continue to use the clamp rings. The job was done way faster than CPVC or copper. USA made was a plus as well! July 1, 2013
Rated 5 out of 5 by Great way to do plumbing projects! I really like using the crimp ring system and PEX for my plumbing projects now. So darn easy, and no leaks! The clamp tool works great, and I have had no problems what so ever with any connections I have made with the tool. You do have to pay attention to working in tight spaces though, as the tool handles have to open all the way to get onto the clamp ring. Sometimes working between joists you have to think ahead so you can make all of your connections. September 12, 2013
2 >>

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


Orders for this item may be expedited for an additional fee.


Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.