Model # 23221

Internet #202300094

Store SKU #760633

Store SO SKU #1000317773

SharkBite 3/4 in. PEX Pipe Talon Clamp (10-Pack)


3/4 in. PEX Pipe Talon Clamp (10-Pack)

$253 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

Clamp 3/4 in. CPVC tubing (not included) with the 3/4 in. x 3/4 in. Plastic Talon Clamps (10-Pack). The clamps are made of plastic for durability and have a collar design.

  • Durable plastic construction
  • Use with PEX tubing
  • Compatible with 1/2 in. tubing
  • Collar design helps clamp tubing together
  • Includes 6 clamps
  • Note: Product may vary by store.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.



Maximum compatible pipe size (in.)
Product Depth (in.)
Product Height (in.)
Product Length (in.)
Product Width (in.)


Accessory Type
Pipe Hanger
Compatible Pipe Material
Minimum compatible pipe size (in.)
Pipe or Fitting Product Type
Product Weight (lb.)

Warranty / Certifications

Manufacturer Warranty
For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242.

More Products With These Features


Customer Questions & Answers

Is the nail for masonry?

Asked by: jim
Answered by: Debadoo
Date published: 2017-07-08

Does it grip tightly? PEX shrinks & grows...

I am curious how tightly this "clamp" holds the PEX pipe. What I have read says that PEX pipe will shrink and grow due to temperature variations from 1" to 2-1/2" over 100ft. Even at only a 25ft run, that means it can move from 1/4" to 7/8". If the "clamp" holds it very tightly, this means the pipe would want to bow when the temperature increases. Please refer to page 2 of attached specs under section entitled: "Elongation (linear expansion)". If the pipe is held firmly, it seems to me it would cause stress on the pipe over time. Please advise.
Asked by: HeTiCu
I am a retired master plumber. I have run miles of Pex in my career. Even with temperature extremes of -10 in the winter to 110 in the summer, I have never seen it shrink and grow any significant amount.
Answered by: Debadoo
Date published: 2017-07-08

Where can I find talon clamps for 1" pipe?

Where can I find talon clamps for 1" pipe?
Asked by: JP
SharkBite 1" suspension clamps are available through special order at the Home Depot. Store sku number is 365165, SO number is 538920. If you have further questions, please contact Customer Service M-F, 8am-5pm at (877) 700-4242.
Answered by: SharkBite Support
Date published: 2017-07-17
  • y_2017, m_8, d_14, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_, sid_202300094, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 98ms

Customer Reviews

3/4 in. PEX Pipe Talon Clamp (10-Pack) is rated 4.2 out of 5 by 6.
Rated 5 out of 5 by from Fastens tight. Built my own H/C Manifolds out of 100% Pex. I left two valves on each Manifold as SPARES. Low and behold, I decided for a 3rd Spigot, so I had purchased 3 bags of their "ten pack eventually". Fasten the tubing at EVERY 32 inches when running it ALONGSIDE a joist, and at least every 6 feet if the tubing is supported by beams and/or running across them. "Some" instances you will have to fasten shorter than recommended, but that's ok. We're all not rich of course and want to take care to use them sparingly within the guidelines, and cost, BUT, do yourself a favor and DO the job RIGHT, your wallet may regret it......BUT YOU WON'T. My Projects' 2 1/2 years old....never had to REplace any yet(knock on PEX). Received an Email to review, but it didn't work, but I at least came here anyways(actually a Verified Buyer).
Date published: 2016-08-03
Rated 4 out of 5 by from Does the job This obviously requires a hammer to nail in, I would prefer a screw and screw driver which would allow more flexibility in where it can be attached without the dust/dirt/insulation that hammering releases in a crawlspace. Other than that, it does the job. We'll see how long the plastic lasts without deteriorating and breaking.
Date published: 2015-01-13
Rated 4 out of 5 by from Worked Great - Would have preferred screwed connection This worked as advertised, but I would have preferred to have purchased a unit with a screwed connection to joists instead of a hammered one.
Date published: 2014-02-27
Rated 5 out of 5 by from super easy... I purchased these to hang my new pex when replacing my 1/2" copper lines to install a water softener. Our home has a 3/4" service coming in, but back in the 50's, they thought that it was a good idea to run everything in half inch. Since I had to make a 35' run just to feed the water softener, I thought that I'd replace all the copper with pex and SharkBites. Project went smooth as silk, and these hangers helped tidy-up the plumbing under the house.
Date published: 2013-04-09
Rated 5 out of 5 by from Quickly and easily supports PEX pipe. These clamps speed the already easy installation of PEX pipe, making it very easy to neatly install PEX to the bottom edge of floor joists. Handy to have a bag full of them when you are crawling around in the crawl space and snaking Pex through a maze of old copper and ductwork.
Date published: 2013-11-17
Rated 2 out of 5 by from After 1 year my clamps are already breaking Walked down into the basement and found one of my pex pipes was sagging from the ceiling without any support upon further inspection i've noticed a whole bunch of the 3/4 talon clamps have snapped in half I don't think the plastic can support the weight of the pipe when filled with water. A second note my 1/2 inch talon clamps are fine I tugged on them a bit to see if they were close to breaking but there still solid with no visible cracks.
Date published: 2015-05-07
  • y_2017, m_8, d_14, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_, sid_202300094, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 105ms