Model # UC955A

Internet # 202032892

Store SKU # 851792

Store SO SKU # 1000315790

3/4 in. Stainless Steel PEX Barb Clamp (10-Pack)

$7.54 /each

Frequently Bought Together

Product Overview

The SharkBite barb connection system is the best option for connecting PEX tubing when lower material cost is desired. Robustly designed with Stainless Steel, the SharkBite clamp rings are corrosion resistant. And with a wide range of fittings, manifolds, regulator, thermostatic and ball valves available, the SharkBite barb connection system is perfect for your next plumbing project.

  • Stainless steel
  • Time saving clamp rings and tool offer reduced equipment cost, 1 tool clamps all sizes
  • Necessity to check each fitting ring with a go/no-go gauge is eliminated with a properly calibrated tool
  • Available in 3/8 in., 1/2 in., 3/4 in. and 1 in. sizes
  • 1-tool need to crimp all sizes

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.



Inner Size (in.) 
Maximum compatible pipe size (in.) 
Product Depth (in.) 
Product Height (in.) 
Product Length (in.) 
Product Width (in.) 


Accessory Type 
Compatible Pipe Material 
Minimum compatible pipe size (in.) 
Pipe or Fitting Product Type 
Product Weight (lb.) 
0.015 lb 

Warranty / Certifications

Manufacturer Warranty 
For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242. 

More Products With These Features


Customer Questions & Answers

1 Question2 Answers

Customer Questions & Answers

3/4 in. Stainless Steel PEX Barb Clamp (10-Pack)
3/4 in. Stainless Steel PEX Barb Clamp (10-Pack)

Ask your questions. Share your answers.

Clear Search Term
2 answers

what crimp tool do i use with these clamps

This question is from 3/4 in. Stainless Steel PEX Barb Clamp (10-Pack)
Asked by
September 18, 2013
SharkBite 3/4 in. PEX SS Clamp (10-Pack)
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Evansville, IN, USA
Read all my Q&A
Home Improvement Profile: DIYer
July 19, 2016
I use a brand name of HYDROPEX. It came "free" in a $329 Kit which had Tubing, Fasteners, Cutter, etcetc. Normally bought by it's self, could run ya $80 - $150, depending on the Brand. It will have a CRIMPER and a CUTTER(to break) the connection and redo.
User submitted photo
User submitted photo
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

September 19, 2013
You should use the SharkBite 2-Handle Full Size Clamp Tool. It will work for 3/8", 1/2", 3/4", and 1" fittings.
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0
1 of 1
  • 2016-07-23 T15:07:37.352-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202032892, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 121ms

Customer Reviews

Rated 5.0 out of 5 by 2 reviewers.
Rated 5.0 out of 5.0 by I could connect 40 in a row, and pull my Boat, TIGHT fasteners!!!! DIY'er. Did >400 connections making my Homemade PEX Manifolds, and doing Room Fixtures,and outside Spigots. NO......REPEAT.......NO leakage at any spot or Fixtures since 2014. "They say - You won't have any problems if ya fastened them right". Agree, to some degree. I say it's a 80/20 in favor of a well made Product.......just saying. Ripped out all Galvy/Copper Piping. A GR8 Crimping Tool I have also. Get a good one(Tool) and it should last your Lifetime, (fasteners get all the blame when something goes wrong). >400 connections, scraped 25, learning process . Used the 1/2' ones also. Bummer bag has only 10. Initially started with 4 boxes from a Supply Web. . Some 1/4" fastened, need 2/16" closer - refer back to learning process comment. Bought 100' roll of 3/4" PEX in Order also. Happy Crimping. July 19, 2016
Rated 5.0 out of 5.0 by PEX beats copper and Clamps beat crimp rings for DIYer's I chose to use ring clamps instead of crimp rings for the following reasons: The clamp ring tool fits all sizes of clamp rings so you don't need to buy multiple tools when fitting up your PEX system. Go-No Go--- when you clamp down on the rings, the tool grabs on to the clamp and you keep hauling on it until it ratchets down to the correct degree of compression. Then the tool lets go and you are done. Ooops--- If you incorrectly join a fitting, you can easily cut away the clamps with your diagonal cutters whereas the clinch rings require a special tool to cut the rings. The only down side I can see to the Ring Clamps is that they are a few cents more per clamp, but you'd have to install hundreds of fittings before the difference in cost was more than trivial. I've now installed more than 40 ring clamps and have not had a bit of trouble. Beats the heck out of sweat soldering. November 17, 2013
  • 2016-07-23 T14:53:52.523-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_2, tr_2
  • loc_en_US, sid_202032892, prod, sort_default
1-2 of 2
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 92ms